How to install: Hooker BlackHeart Exhaust: Install and test drive (LS Swapped Monte Carlo)

3” HOOKER BLACK HEART EXHAUST INSTALLED ON PROJECT SS #pennyls1, #holleyperformance, #hookerexhaust, #gbodynation, #lsswaped, #summitracing
HOOKER BLACKHEART HEADER BACK EXHAUST SYSTEM
PART# 70501364-RHKR
www.summitraci...
HOOKER BLACKHEART TRANSMISSION CROSSMEMBER
PART# 12644HKR
www.holley.com...
HOOKER LS-SWAP FULL-LENGTH HEADER - PAINTED
PART# 70101506HKR
www.holley.com...
Irish Marcelle Productions
Equipment used for production
iPhone 13 Pro Max
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
iPad Pro 11inch
Lumafusion

[@Caprice1977]

I was about to buy American racing headers exhaust system $1800 + shipping that bring it up about $2000 for my G body but after seeing your video I looked up that exhaust system $911 with free shipping from Jegs .You saved me $1000 now I could buy my digital Dakota cluster ..Thanks for the post brother

[@GBodyEmpire]

That sounds real nice!!! Is it too loud when driving? Also, do the hangers bolt on to the frame or the underside of the body?

[@PENNYLS1]

It’s not too loud when cruising, only when you floor it. The hangers mount to factory locations on the underside and the frame.

[@GBodyEmpire]

@@PENNYLS1 sweet! I also seen that that the end of the exhaust hangs a bit low, is that something that could be adjusted?

[@PENNYLS1]

@@GBodyEmpire I couldn’t get them to stay up high enough. I ditch those tips and went with the SS style rear exit tips kzbin.info/www/bejne/hX3NpHiKm8ikoLssi=LLLwefyXFfnPfOx9

[@asicerik]

I just got one of these for my Camaro. Great video, thanks for posting

[@oscarrodriguez-vy4rs]

Any videos to share? Thinking of ordering for my 68 Camaro

[@toadis6949]

Just ordered a cat back exhaust system on summit racing stainless dual rear exhaust for a 18 f150 5.0 for $322 I do believe they released their mistake and currently pulled it from their website. States that it's not available now. Say's it's going to ship out March 3rd as they didn't have it in stock... Was looking at the borla pro s at $1698 and the Chinese knock off wwp on Amazon for $398 but I think they goofed at $322

[@okcfirewall]

Sounds wicked awesome

[@toadis6949]

I know this is an old video but wandering how the exhaust system is holding up and do you like it

[@PENNYLS1]

It’s holding up just fine. Best thing about is that it’s not too loud while cruising but when you floor it, it’s a beast

[@VOAOURKZ]

Sounds good. I got the same thing but my mufflers hand down so low that they’ll scrape sometimes on the driveway. Sounds great tho

[@ryanwilliams7600]

Sounds real nice. Looked fairly easy to hook everything up. I've got an 87 SS. Life has dictated that I keep the stock 305, but I will be making some modifications to it. Your video was well done. Keep posting updates. Good luck with the next phase of the restoration.

[@delonthompson2527]

Got the same setup on my 78 malibu......nice exhaust...its easy to take on and off

[@WarrenGBody]

BAD ASS!!!!! Man I’m glad you ditched the Harbor Freight Jack stands. I did a vid a while back on how to identify the bad ones on my old page. I did the same thing. I just use em to hold up small stuff and I dont extend em. I went with a double locking style . The exhaust sounds really clean!!!! 💪🏾💪🏾 Definitely going with this setup in my el and the LS376/525🏁🏁 Keep the dope uploads coming fam!🏆🏆🏆🏆

[@tannerstap1]

Looked like everything fit up nice. I have similar long tubes with the 3” smooth collector like the black hearts. Sounds a little milder than I want though. I know phone mics aren’t the best tellers of the sound though.

[@comptoirscasagranite3483]

Any drone in cabin? Can’t decide to go 2.5” Or 3”..

[@PENNYLS1]

No drone.

[@bgibbs9507]

Sounds good, let's see the LS scream with a burn out...

[@carminking9315]

Nice

[@SS_Gang777]

Amazing job sounds great does the kit come with the clamps and hangers?

[@PENNYLS1]

Yes, everything was included in the kit.

[@acollins9277]

👍🏾

[@88hardtop34]

I bought 3 inch borla pro mufflers could I still use the 3 inch x pipes on my install ?

[@danielalfaro4933]

Hey is that package universal for all cars n trucks? I LS swapped my c10 but I need exaust now n I liked how it’s all bbangs on yours

[@PENNYLS1]

The kit for the C10 is a little different. Check it out. www.holley.com/products/exhaust/exhaust_systems/hooker_blackheart/parts/VK090005

[@danielalfaro4933]

@@PENNYLS1 thank you 👍🏽

[@jorgemontoya1490]

I just got my exhaust kit in trying to install but it hits on my cross member and I have everything Holley hooker mounts cross member exhaust it hits on driver side can you send pics of your cross member how it’s installed just so I can see if I installed mine right

[@PENNYLS1]

I’ll takes some pics tomorrow. What’s your IG @?

[@jorgemontoya1490]

@@PENNYLS1 sochevy

[@TheDuck8679]

You get that resolved Jorge? Having the same problem with mine.

[@gen2maro]

Are the mufflers straight thru or are they have chambers

[@PENNYLS1]

Straight through designed absorption mufflers, is how Holley describes it.

[@jermainepeterson1764]

Which mufflers are those. Do they give you an option of mufflers

[@PENNYLS1]

It came as a kit. I do not see a model number for just the muffler. www.holley.com/products/exhaust/exhaust_systems/hooker_blackheart/parts/70501364-RHKR

[@jermainepeterson1764]

Ok thanks

[@kendog1995]

Hey what engine do you have? Would this work with a lq9 in a 87ss

[@PENNYLS1]

I have a LS1 5.7. Yes as long as you have long tube header with a 3” collector, this kit will work

[@kendog1995]

@@PENNYLS1 thank you!

[@jorgemontoya1490]

What transmission do you have

[@PENNYLS1]

4L60e. I got the engine and trans out of a 2002 Camaro SS.

[@jorgemontoya1490]

@@PENNYLS1 I have 2000 z28 ls1 in mine I think I have my trans mount upside down

[@chevylandtv670]

weird question can I use this exhaust system on the original 305 engine

[@PENNYLS1]

Yes, as long as you have headers with 3” collector and you will definitely need a dual exhaust cross member