[HOW TO] Install LED Fog Lights on a 2014-2015 GMC Sierra (DIY)

This video shows how to install Morimoto XB LED fog lights into a 2014-2015 GMC Sierra.
They can be purchased here: amzn.to/2v4tWEi
Check out my Amazon Store Front!
www.amazon.com...
Work Gloves: amzn.to/37jel2a
Milwaukee Impact Wrench: amzn.to/2RgJJJ5
Makita 12v Impact and Drill Set: amzn.to/2TW5gIP
Makita 18v Impact and Drill Set: amzn.to/30GVyLy
Makita Drill Bits set: amzn.to/37ie538
Go Rhino! Digital Pressure Inflator: amzn.to/2G8x6t8
Dewalt Socket Set: amzn.to/2GdmUzq
Craftsman Torque Wrench: amzn.to/30GZzQd
Trim Removal Tools: amzn.to/37gjRSR
Oil Drain Pan: amzn.to/2vbQZ08
Oil Pump: amzn.to/36fxyAf
Shop Towels: amzn.to/2NLimok
Chemical Guys Inner Clean amzn.to/3azFvDE
My Camera: amzn.to/38uDnLU
Get Amazon Prime: amzn.to/2RdYigg
--As an Amazon Associate I earn from qualifying purchases.

[@fondupot]

They can be purchased here: amzn.to/2v4tWEi

[@ModernMetal7]

I just installed these last weekend. They are amazing! going to install the Morimoto HID kit on my 2014 Sierra Denali this weekend and your install video really helped! Thanks brother!

[@fondupot]

Adam S glad to help dude!

[@231jdc]

Great Video. Thanks for the instruction. Mine XBs came in today and I can't wait to get home to put them in so I found this video extremely helpful. Several things I wasn't expecting. I would have been worried of breaking the OEM trying to pull it out for sure. Anyways, thanks.

[@fondupot]

Glad to help! Enjoy the lights!

[@FixyourNissan]

I just brought these exact fog lights and your video was perfect! Good Job.. Thanks for taking the time to make this video.

[@fondupot]

FixyourNissan Glad the video helped!like, subscribe and share!

[@mfurm1038]

Great job explaining! Thanks!

[@fondupot]

You bet! Thanks for watching

[@amolson8594]

A bit of a trick to getting the old light out, instead of yanking the the lights ball joint out of the plastic retainers, just remove them from the back side and the light will come right out. Use 2 small sockets and put them over the retainers on the back side (two of them are seen at 2:35 of the video). The sockets will compress the tabs on the retainers so they just slide right out still attached to the light. Use 2 sockets as its easier to do two of them at once. Do the top two first then move onto the bottom one. That way you're not yanking on things and potentially breaking the retaining clips. Have you aimed yours yet? I have yet to do that, I tried to count the same number of turns the original adjuster was turned to but they are pointed too low. I'll have to find a flat paring lot and a wall one night and get them adjusted before it gets cold out.

[@fondupot]

Yea, I actually figured that method out when I went to install the new ones. I actually don't have this truck anymore, but I did not need to aim them. I was satisfied on the first try with their aim.

[@Tonyyyzx11]

Thanks

[@fondupot]

Youre welcome

[@jacksmith3189]

Good info. Thanks

[@fondupot]

Jack Smith glad to help. Thanks for watching.

[@22andymvp]

great description man! you make the average joe a professional! one question. can you post a pic or video of what the truck looks like w those leds?

[@fondupot]

Hey thanks. Unfortunately, I do not have this truck anymore. :(

[@MrSlimneo]

FYI on my 2014 Sierra the passenger side light just pulls out. You do not remove the outer ring.

[@back2vinyl493]

Thanks for posting, going out to install mine now👍

[@fondupot]

Back2Vinyl right on. Good luck!

[@GregZrust]

Great video

[@fondupot]

Thanks

[@bryanaustin22]

I've been seriously considering getting these. But from everything I've seen I'm apprehensive about the beam pattern. It looks very narrow. I've seen them installed on a car close to the ground but curious as to what the output looks like on a truck

[@Whodunnit4eva]

thanks man I have a 14 silverado these videos are helpful. been debating taking the air dam off of mine like you did. the ground clearance with that thing on is pitiful. how do you like the looks so far without it?

[@fondupot]

It's growing on me. If I ever decide to put the air dam back on, I may trim it down.

[@scottbwilson]

Excellent Video. Any tips on adjusting these?

[@fondupot]

Around the 3 minute mark I talk about transfer over the adjustment screw from the OEM fogs, to the new ones. You'll get a little bit of up and down adjustment from that. But I didn't move the adjuster screw at all when i transferred mine over and they were adjusted perfectly after I installed. Thanks for watching! Please Like, Subscribe and Share!

[@FrankenDoctor]

Did you aim the fog lights after the installation? Thanks for the video. Sure to come in handy for anyone considering this mod.

[@fondupot]

I haven't yet. But I made to sure to get the adjustment screws to the same amount as the OEM fogs. I was going to mess with the aim eventually. It was so hot today when I did this, so I lost steam.

[@FrankenDoctor]

Thank you. I know what you mean. I'm in Phoenix. so hot is our specialty.

[@jeffhicklin4653]

I have a 2014 GMC Sierra 2500HD Denali, with 6.6L Turbo Diesel, and there are no bezels around the fog light assemblies. Additionally, the entire fog light assembly is completely different looking than what he has.

[@fondupot]

The 2014 2500/3500 was still the old body style. Those trucks didn't get the new body style until 2015. You're truck is entirely different.

[@qualitylandscapeandhauling7710]

Hi. I installed new l.e.d. bulbs in my headlights. The only problem now is i cant seem to pull out 1 of the old l.e.d. bulbs. A stereo shop installed the l.e.d.s that im now replacing. How do i pull them out ? Any special tricks ?

[@fondupot]

Shouldn't be any different than a regular halogen bulb. You need to twist them out of the socket.

[@qualitylandscapeandhauling7710]

Hey can you do a video of how these light look at night ?

[@fondupot]

Unfortunately, I cannot. I don't have this truck anymore. They were better than stock tho. for sure.

[@W.Vanderbilt]

I wish you should how to line them up as far as beam goes

[@qualitylandscapeandhauling7710]

Oh ok. Thanks !

[@fondupot]

You bet. Good luck

[@JTB31622]

What tires were you running on there at that point? Brand and size? Thanks!

[@fondupot]

I think those were BFG KO2's. LT275 55 r20. You're welcome. Please Like, Subscribe and Share!

[@qualitylandscapeandhauling7710]

Hi. Do they help you see further or just wider ? I currently have L.e.d. bulbs in my fog lights . I feel like my lights currently are just blinding oncoming traffic and in thick fog....they dont help. The light bounces back to me.

[@fondupot]

I think they help further and wider. The reason you are having poor results with the drop in LED's is because the focal point is different in the reflector compared to the OEM halogen. These XB LED's are designed specifically for LED's so they will perform much better.

[@qualitylandscapeandhauling7710]

fondupot Thanks for replying back. Well I will definitely be buying these .

[@fondupot]

Cheers. Glad to have helped. Good luck with the install. Please Like, Subscribe and Share!

[@84bobcat]

How much brighter are they than stock?

[@ydnarslohcin1592]

nice. thanks. where can I by the led fog lights????

[@SuperGM03]

How bright are these light and how’s the light output on them I was looking at these or the cube ones

[@fondupot]

Castilloh09 they were pretty bright. And pretty wide. I liked them because they didn’t stand out compared to stock. The cube ones look out of place.

[@billluster7687]

I'm wondering if it's that easy on a Silverado or if you have to remove the bumper.

[@fondupot]

Not sure to be honest. I think the Silverado versions of these are just as easy to do.

[@Apftw]

any one know if the chevy or GM ones will fit a 2013 sierra 3500 they dont have a fitment listed.

[@cjfraccola6710]

Hey man nice video for the driver side lol any info or tricks for the passenger side. I can't even get to tye plug let alone the bulb.

[@fondupot]

CJ Fraccola hey I don't recall having any issues with the passenger side. I was able to access everything from underneath the bumper.

[@cjfraccola6710]

Was your truck a 1500?

[@fondupot]

CJ Fraccola yes it was.

[@cjfraccola6710]

That's what the difference is then. You can't even move on the passenger side it's crazy

[@fondupot]

CJ Fraccola yea that is really weird. Maybe search around on the forums to see if you can find anything.

[@Ty-sy3nn]

I installed the Rigid Fog lights in mine, I wonder what your beam pattern is like compared to Rigid Industries.

[@fondupot]

I have had rigid lights in the past. These morimotos are good, but the Rigids are probably a little more heavy duty and better suited for off road.

[@Ty-sy3nn]

+fondupot Well its stuck in mall cruiser mode right now.

[@fondupot]

Tyler C lol, mine too. Shes a street queen for sure.

[@3doo0ooL]

Hi Do you know how to change map light for sierra denali 2015 ?!

[@fondupot]

Sorry, I do not. I know it's and LED, and its very possible that it is integrated into the overhead console.

[@korydouets3134]

Love your rims! What kind are they?

[@fondupot]

Thanks, those are the OEM 20" All Terrain trim wheels.

[@danschefer3289]

where did you purchase them at?

[@fondupot]

We did a group buy on GM-trucks with a website called distantxtremes.com

[@jorge4304]

where can i get this kit at thanks

[@fondupot]

www.theretrofitsource.com, check video description for link.