These are my favorite videos. Doing installs and working on your bikes. Enjoy watching you two. Thank you
@LifeontheBlacktop3 жыл бұрын
Right on, glad you liked it.
@HARMARSCH23 жыл бұрын
BlacktopDevil, Nice install. Plus it doesn’t hurt having the extra light on your Motorcycle at night and be seen.
@bumrush53143 жыл бұрын
I think mrs devil planted that stuff on the floor to clean up. 😂😂 Install for the layman of us. Nice job
@jimweagant89203 жыл бұрын
Good job black top devil and misses black top devil on the video
@djlarryb683 жыл бұрын
You were singing Step By Step- New Kids On The Block 😆
@Touringmidwest2 жыл бұрын
Ha, This is Good I just recorded this same install video last week. they are really nice lights.
@MichaelH4163 жыл бұрын
I added those and Ciro’s forkini lights to my Road Glide. Makes the side profile look so much cooler, and makes me so much more visible.
@MinnowMoto3 жыл бұрын
Great install. I thought it would have been way harder to do. Don't forget to pay the clean up crew :)
@LifeontheBlacktop3 жыл бұрын
Ha, will do!
@michaelcountssr.84453 жыл бұрын
the bloopers/outtakes are a hoot! keep up the good work y'all
@LifeontheBlacktop3 жыл бұрын
Thanks for staying til the end 🤗
@michaelcountssr.84453 жыл бұрын
@@LifeontheBlacktop hope y'all are enjoying sturgis
@TheBasicBiker3 жыл бұрын
I use the same type of drill bit :D And your drill is almost identical just a different brand Good choices :D
@cd49172 жыл бұрын
They are Awesome!! I just installed them along with the panel lights, bag blades, Lightstrike crown tail light, Fork lights, Headlight bezel, and the Horizon windshield trim. All chrome with smoke lenses on my 21 SGS All from Ciro. I need help, im addicted to Leds.💀
@cathyfields3 жыл бұрын
Hey guys good content liked the video and your Camera lady is doing a really great job and the BTD funnies is a great addition to the video Ride Safe out there and until the next time
@hookdog86403 жыл бұрын
Great video, good step by step for everyone.
@hookdog86403 жыл бұрын
A blanket under the saddlebag on the table would be nice. Lol
@LifeontheBlacktop3 жыл бұрын
Lol it's one of those soft slippery shelves. Doesnt scratch stuff and works great for this kind of work.
@kenlewis40783 жыл бұрын
Thanks for the video... very helpful! What is the reason for not using the step bit for the first hole? Thanks again!
@LifeontheBlacktop3 жыл бұрын
It's a little thicker right there so it makes it tough. Also if you aren't careful it could drill your hinge. If you had a step bit that stopped at 9/16 it would probably work OK.
@philgrigsby64673 жыл бұрын
This video is very much appreciated.
@sidneysnottley64143 жыл бұрын
Great 'How to' - Cheers.
@emeryhvac10233 жыл бұрын
First!!! Boom goes the dynamite 💥
@LifeontheBlacktop3 жыл бұрын
The BlacktopDevil family is proud of you! 😎
@marcbaird8693 жыл бұрын
Its called the German torque specification! Goodintight! Lol
@bigpaparides31283 жыл бұрын
Good video, clear directions, to bad mines a 13 cause I really like thise
@LifeontheBlacktop3 жыл бұрын
Same!
@brianmorrison11073 жыл бұрын
Need a video of you on the road at night with all these lights.
@roadglide3 жыл бұрын
Nice! I likey. Thank you.
@LifeontheBlacktop3 жыл бұрын
Absolutely. I like how they add that extra bit of side light. I just wish they had them for my own bike. 😭
@whskywolf3 жыл бұрын
Those are pretty cool, did you use green painter tape since it Ciro 3D?
@LifeontheBlacktop3 жыл бұрын
Haha good catch! But no, it's all I had lol
@crbrepairmotorcycles66083 жыл бұрын
Nice lights but only down fall is removing side bags the wire harness be better with a plug in connector between bike & side bags, make your own I guess
@LifeontheBlacktop3 жыл бұрын
You can have the plug out from under the seat if you want. That's how I have my bag lights so I can pull the bags easier
@crbrepairmotorcycles66083 жыл бұрын
@@LifeontheBlacktop that's sounds cool I was thinking how the cvo"s and bag speakers plug in on the side of the bags
@ronwatts2683 жыл бұрын
I installed them on my Ultra. I have them plugged into Custom Dynamics triple play which has settings that make my brake lights strobe. They are nice and bright. My gripe is Ciro could have made better wire connectors.
@LifeontheBlacktop3 жыл бұрын
Kind of a pain but I see why they didn't want a bigger hole in the bag just for the end of the plug.
@possumrides84483 жыл бұрын
Damm it! I've got a 2013!
@carolinarider52373 жыл бұрын
I like this but the only thing holding me back on buying them is, if you have to take the bag off you will have to take the seat off to unplug the lights
@LifeontheBlacktop3 жыл бұрын
You can wire it so the connection just sits outside of the seat. That's how I have my bag blade lights wired so I don't have to remove the seat.
@MrRobertoa13 жыл бұрын
I'm asking this question for two reasons, one if I ask a question I'm helping you with the algorithm and two i really want to know. I have 2012, ciro has a kit for my bike too?
@LifeontheBlacktop3 жыл бұрын
Unfortunately not. Mine is a 2011 and I want them too.
@stephenbirch94363 жыл бұрын
That was Great, but i have 2012 flht, bugger to old.
@LifeontheBlacktop3 жыл бұрын
Mine is too old too 😭
@kayo49213 жыл бұрын
What about for 2013 road glide ultra
@LifeontheBlacktop3 жыл бұрын
Unfortunately not. Mine is a 2011 so I feel your pain.
@kayo49213 жыл бұрын
Dang
@19Trent693 жыл бұрын
Haha. Need another buddy ✌️#phoneabubby
@williamcraft92683 жыл бұрын
I've got 13 SG do they make em for my ride ?
@LifeontheBlacktop3 жыл бұрын
Unfortunately not. Mine is a 2011 and I want them too. 2014+
@jimbeall49203 жыл бұрын
Im the only one that clean’s under the seat lol
@neilo60322 жыл бұрын
You use painters tape like Red Green uses duct tape.
@mathiggins42643 жыл бұрын
Did your wife get her motorcycle license yet your buddy from Oxford