M-lok vertical foregrip install on any M-lok compatible rail system Custom grips at: Polyblankgrips...
Пікірлер: 92
@easymoney8098 Жыл бұрын
Thank you sir, idk why I was overthinking this I thought I was gonna need to take off the guardrail
@AthenaTheWolf Жыл бұрын
I thought the same thing! I’m glad I looked up this video before doing that.
@desupernoodle11 ай бұрын
I was overthinking it too! 😂
@DarneIITV3 ай бұрын
Same lol
@apex4032 ай бұрын
Hah looks like you're not alone, there's a few of us who was thinking this ;)
@markethub1741 Жыл бұрын
you would think $40 for a grip maybe a tool would come with it
@PeterFusco5 ай бұрын
I believe the one he's showing is somewhere around $26. But, I agree, an allen wrench included would be more than helpful.
@omarmendez4003 Жыл бұрын
Wow my magazines have a honeycomb patter all around it
@louisrecycleitall4796 Жыл бұрын
Thank you, your video was very helpful
@Domepeezy Жыл бұрын
Nice build
@VibeCenteral-rh2bd Жыл бұрын
Why’re the nuts spinning this is hard
@blackrb123ryanАй бұрын
Thanks for the video. I accidentally broke the foregrip off of my dad’s AR-15 and I needed to put it back on before he notices.
@LEGENDARYSTRAFE10 ай бұрын
Hand tightened and used tool as much as possible once i put the grip on the rail the locks just spin and dont catch onto the rail
@polyblankgrips477910 ай бұрын
See updated video addressing this problem: kzbin.info/www/bejne/fJLXm62PqrqGrs0si=MJLFFiTFrf67EHUk
@simeonanderson2437 Жыл бұрын
Love your hex grip on my M10x
@sl-lin0bi5294 ай бұрын
Pretty sure that placement you chose for the rvg is just your preference and not a must do.
@joemamma26477 ай бұрын
Wow did u hear that buffer spring when he pulled back the charging handle. 😂😂😂alittle white lithium grease goes along way.
@ecncore510 Жыл бұрын
I did everything you said and not even close. How did you get it to stay so you can screw it? There's nothing there to hold it
@polyblankgrips4779 Жыл бұрын
You may have to put it in the slot with the T nut a bit tighter on the screw, that way it can catch on the handguard. If it doesn’t work then tighten a bit more, until it does
@ecncore510 Жыл бұрын
@@polyblankgrips4779 it worked. Thanks
@timothycontreras84245 ай бұрын
Is that a compensator on your barrel? I just purchased a Areo M5 with one exactly like that on the barrel. Wondering what it is...
@Schlingensiepanator Жыл бұрын
Cool but what’s with the blue line bs?
@jcel5870 Жыл бұрын
Blue line meaning.... Police department support
@andrewb0124 Жыл бұрын
Because he supports something that’s important 👍🏼
@goldy4631 Жыл бұрын
He’s silly and likes cops he’ll learn they don’t matter eventually
@some_cool_random_guy Жыл бұрын
@@goldy4631 you’re saying police don’t matter? imagine any country without law enforcement… yeah…💀
@goldy4631 Жыл бұрын
@@some_cool_random_guy They have none of our well being in mind. They’re there to ensure the community doesn’t improve. But, to sustain the environment where they capitalize off of us. Rather than protect us. The American Policing Business isn’t people focused it’s revenue focused. We’re only dollars walking around for them to increase their budget each year. There’s a reason why they get more money the more calls they respond too. More money for . . . tactical vehicles . . Yay
@eliasrodriguez8294 Жыл бұрын
Gotta Lube that baby more sounds dryer then a knofe on a chalk board
@some_cool_random_guy Жыл бұрын
thanks
@batesBeckham Жыл бұрын
0:55 So what happens if you don’t go inbetween 2 mlok spots and place it on a singular one? The reason I ask is I have a 5inch barrel 300 blackout and it only has a singular mlok placement slot. I can’t go between two slots, there aren’t two…Will it still work ok?
@polyblankgrips4779 Жыл бұрын
You can place it in a single slot if it is standard length (not a shortened slot) and it will work just the same
@batesBeckham Жыл бұрын
@@polyblankgrips4779 thanks!
@MrRedpanda2442 Жыл бұрын
Thank you bro!
@johngg259 ай бұрын
What’s the name of the grip with the blue line on it ? It’s cool
@polyblankgrips47798 ай бұрын
“Standard flag (police stripe)” polyblankgrips.com/foregrips/p/standard-flag-blue-liine
@rickwhite9748 Жыл бұрын
Any recommendations on installing an M LOK foregrip with only one slot?
@polyblankgrips4779 Жыл бұрын
Depending how long the slot is that’s your only option. Email a picture of it and we can figure out some potential solutions @polyblankgrips.com
@rickwhite9748 Жыл бұрын
@@polyblankgrips4779 I appreciate the response but I figured out a solution. I attached a 2 inch picatinny to the M lok and then I attached a foregrip with a picatinny mount, it's solid and firm. Thanks again!
@zaymoney16987 ай бұрын
@@rickwhite9748yo bro you still got it ? I got a 5 inch 300 blk out trying to put a grip and laser sight on it but I’m trying to figure out which ones a fir
@rickwhite97487 ай бұрын
@@zaymoney1698 unfortunately I do not, I gifted the entire rig to my nephew, thanks for asking though
@RagnarMLT11 ай бұрын
Thanks man
@rhonnice Жыл бұрын
The question is is it legal to have those on your at pistol?
@Jarl_Balgruuf Жыл бұрын
no
@murkyturkey523810 ай бұрын
Do whatever you want, no one is going to stop you 😂 cops in my area literally don’t enforce bs laws like this.
@SenseiDasratt Жыл бұрын
what size bit did you use?
@polyblankgrips4779 Жыл бұрын
2.5mm allen key
@trevorthomas16209 ай бұрын
What light do you have attached on the side of your AR?? Really nice
@polyblankgrips47799 ай бұрын
WADSN M300A. It was a cheap light, but offers a decent distance and quality pressure pad
@Brennagonxavier8 ай бұрын
@@polyblankgrips4779what handgaurd and charging handle you using on this gun
@olecranonrebellion99763 ай бұрын
Heard the blue line represents them against us, or vice versa.
@tank506211 ай бұрын
Where can you purchase a for grip like this???
@polyblankgrips477911 ай бұрын
polyblankgrips.com/foregrips
@Merritt32469 ай бұрын
Is the one you mounted a standard length?
@polyblankgrips47799 ай бұрын
yes it is, standard is 3.16" (80mm) while Low Profile is 2.8" (71mm)
@tannerhicks4098 Жыл бұрын
Mine just turn in place and never cinch down. Like wtf. I gotta be doing something wrong
@polyblankgrips4779 Жыл бұрын
Tighten the T-nut a bit more before putting it in the slot on the hand guard. You will have to do it for both screws
@VibeCenteral-rh2bd Жыл бұрын
I’m having trouble with mine too, whenever I try to tighten it it just spins, the screws are to janky for the nuts to tighten what can I do to fix this?
@MrRedpanda2442 Жыл бұрын
@@VibeCenteral-rh2bd i pulled on the grip to give the screws more friction and that allowed me to tighten them
@Nwonknu_Eno5 ай бұрын
All the blue gang , boot licking society club aside : I like that honeycomb one ill check yall out. First time veiwer...
@everetts82794 ай бұрын
raghhhhhhhhhh
@EyeTye2 ай бұрын
The tyrant line looks dumb.
@anthonyjordan6371Ай бұрын
Under rated comment. It’s like putting a Gadsden flag on a cop car