How to Install Mini-Floorboards on your Harley-Davidson | San Diego Customs

[@veronicabarreda4231]

Great video on install …. I bought different floor boards and needed help so thanks. Detail / info great

[@willst101]

Really nicely done video! Easy to follow, very instructive, and none of the "I skipped ahead and did X" that sometimes happens in DIY videos. Also wish I had seen the SDC floorboards before I bought my Crossthreads ;-)

[@TryItWithTim]

Appreciate it yo, glad you enjoyed!

[@puntakankleenklay398]

Just bought one after watching your review to fit in my 2022 FXLRST 🙏

[@TryItWithTim]

Awesome dude! Your gonna love it man

[@wallyr.7854]

Awesome detailed DIY video, thank you 👍🏻

[@TryItWithTim]

Anytime!

[@mikethomas7600]

Great video, nice product. Thinking about doing the same, also interested in your windsheild and where you purchased it?

[@oldhead_]

Great attention to detail..workmanship is top notch and they look good..

[@TryItWithTim]

just rode 1000 miles over the weekend with them and they were awesome!

[@jayteesgear]

Sir you recieve an A+ !!! I wanted these Harley Brand mini Floorboards but the site says “Does not fit Softail” 😮 haha. I’ll look for these! Cool video

[@mikep5647]

Do they stay in place, as far as angle after after months of riding? All the ones if tried if you stood up the bolts would allow them to twist a bit.

[@TryItWithTim]

I havent had any issues they seem to be in the same spot since I installed em

[@willknott4796]

Got a video for the passenger pegs? I didn’t see one in you video list. And nice content by the way. Short and sweet. I get tired of these dudes that have soooo much b roll when I just want to check out some floor boards or pegs lol

[@TryItWithTim]

Hey what’s up man, I have the passenger footpegs in gold but didn’t do a video on them. The install is about the same and my lady loves em. Lol I feel ya on the extended b roll segments 😂

[@richardtheisen6456]

Please tell me what you like about the boards vrs pegs. And they appear to rock, not like-man those things rock,, but actually rock . Do they? That should make shifting easier, right?

[@TryItWithTim]

I love the mini floorboards for daily riding and long trips. Overall I feel more secure on the bike and I can stand on them like an adventure bike. Shifting is no problem at all and they do not “rock” You can flip them up just like regular pegs.

[@Ami_Ltd]

Enjoy! I got fixed on mine as well.I love it!

[@TryItWithTim]

Its definitely a game changer!

[@deborahf3738]

Nice look....standing up on the motorcycle, 😎

[@TryItWithTim]

Thank you its my signature move for now lol

[@tani_s_life_channel]

I am glad to meet you I am sending you a message from Japan. Thanks for the great video! The DIY and reviews are very helpful! I will install it on my bike too! And your bike looks great! It's the coolest!👍 Thanks a lot!

[@TryItWithTim]

Glad to meet you too man, from California! I would love to ride in Japan one day! Have fun with your bike!

[@heazy87]

I just installed the Harley 80 grit pegs. they're sick.

[@TryItWithTim]

nice those are pretty dope!

[@paulson9616]

Tim, got one too myself. Super comfy n grippy as f**k. Looks dope too at it.

[@TryItWithTim]

Nice bro, they are surprisingly grippy!

[@paulson9616]

@Try It With Tim now, I had this SDC footboard for a while. I really like the way it functions n looks appealing, unlike other traditional boards in the market. I am not gonna name other brands, but you know what I am talking about.

[@DaLarr9]

Very nice man. Been looking for some pegs and passenger pegs. Theses look like a good option.

[@TryItWithTim]

Thank you! These are awesome I only wish I got them sooner

[@joejunior1974]

Great video! Have you found an upgrade to the stock rear brake pedal. It sucks. I have a 22' Street Bob, and I can't find an aftermarket pedal extension or anything to make the pedal wider. Thanks for making the video.

[@TryItWithTim]

Thank you man! I have NOT and if you do please let me know because I want to change it out as well. I’ll do some research for one

[@infini1970]

I'm considering these for sure. I don't like the spiky bmx bicycle types as I don't wear sneakers when I ride. I heard the vibration comes through when your at higher speeds. Have you found this to be true and uncomfortable on the highway? Thanks dude!

[@TryItWithTim]

Hey whats up. My buddies that have the spikey floorboards do say the vibration is noticeable. These ones have been perfect for me, and are very smooth on the highway.

[@infini1970]

@@TryItWithTimGood to know. Thank you!

[@soots9886]

Snap ring pliers work great to remove that little retaining clip

[@TryItWithTim]

Thank you!

[@Crowbar381]

do they stick out further than the stock pegs? Will having them reduce your lean angle before scraping ?

[@TryItWithTim]

They dont stick out any further, and unlike the stock pegs they dont have that metal piece that scrapes when you lean a bit too much. If anything these are just a hair higher off the ground then stock

[@Crowbar381]

@@TryItWithTim awesome, thanks for letting me know

[@Crowbar381]

@@TryItWithTim p.s I know the bits you mean that point down, the “ wear pegs”. They can be taken off the stock pegs easily, either when they wear down and you want fresh ones, or if people don’t like them. I kind like them in a way as they act as a little warning 😀

[@TryItWithTim]

@@Crowbar381 didn’t know that thanks! exactly I like them too and I was about to say if you scrape on these floorboards your probably going to lose traction

[@Konigkev]

Thanks for the vid. I just ordered the exact set. How have they been since getting them?

[@TryItWithTim]

Your going to enjoy em! They are holding up very well!

[@GusDaCosta]

Those look great!!!

[@TryItWithTim]

Thank you! Cant wait to put the passenger sets on

[@thehomerperspective5782]

Great choice! I was considering the ones from Crossthread Cycle, but I’m thinking that the ones you picked up look cleaner. Not so “BMX” ish. It’s all subjective tho 😁Great Video man. Thanks for being thorough.

[@TryItWithTim]

It was between Crossthreads and these for me as well. My buddies have crossthread but I did not want that spiky feeling. These SDCs are awesome as they provide tons of grip without the BMX aesthetic. Glad you enjoyed it bro!

[@amg5795]

Are these are light weight ?

[@TryItWithTim]

Yes pretty lightweight

[@dusterstilldustin]

Great video brother, they look great. Wonder if they would fit my 2022 indian chief?

[@TryItWithTim]

Thank you! Im not sure on that one, but im sure if you reached out to them they may be able to help you out

[@matttimney]

What clevis did you use do you have a part number?

[@TryItWithTim]

I emailed them to send me a rear Clevis because at the time i ordered it was not listed online . I’d say just shoot them an email specifying

[@badgirlrockstar]

Great video!

[@TryItWithTim]

Thank you Desma!

[@djm584]

Yo how’s the Memphis shades sport fairing holding up I’m really considering sport shield as well never had a fairing on my sportster or my lowrider

[@TryItWithTim]

I'm still lovin it and it adds just the right amount of protection for the longer road trips. Im also interested in trying the next size up for more protection. If you still like the feel of the wind and just want a little more protection and a minimalistic look than I would definitely recommend my sport shield.

[@jasonsanderson9385]

Floor boards look good... What front windshield do you have??? I like the minimalist sizs

[@TryItWithTim]

Del Rey Sportshield by memphis shades

[@jasonsanderson9385]

Checked out Memphis Shades, looking at Del Rey, Del Rio & Pop Top Sportshields...... Now gotta narrow it down to 1 choice... For now, quick release will allow me to switch if I choose to in future.

[@btoso32]

Sick bike!

[@that_mdrfkr4451]

Been trying to find these and the full size for 2 months

[@TryItWithTim]

I cant believe I got lucky and got a set

[@russelrides3218]

Thanks Tim had to refer to this again lol.

[@TryItWithTim]

lol nice sometimes I have to rewatch my own videos too XD

[@Chef626Armando]

Amazing 👍👍

[@TryItWithTim]

Thanks!

[@Mustbefate]

Cool man thx for posting. Got Thrashin Supply militant pegs and honestly did not like them because they were awkward under your boots if you had any type of heel. It put your feet too far back and couldn’t reach the rear brake comfortably. So, time to reach out to SD Customs. The tool to remove the snap rings are called snap ring pliers (if that’s what you referred to in the video?). I used them on mine and honestly they were a pain so just easier with a small flat head screwdriver to tap them off IMO. Did you do anything with the rear brake pedal btw? Why HD makes it like that is stupid. Foot can easily slide right off the stock ones.

[@TryItWithTim]

I’m loving the mini floorboards and they comfortable with my boots. Thanks for the tip to remove the fasteners! Good luck with the SD customs , there was this other company too I considered with a mini floorboard shaped like a coffin which were dope. It’s a game changer from the HD pegs

[@Mustbefate]

@@TryItWithTim I went to order the floor boards and SD Customs are out of stock on all of them. Oh well....back to the drawing board.

[@rach0150]

Good video!!! Would you tell me that Mini-Floorboards product brand name and parts number or model name?

[@that_mdrfkr4451]

How did you catch these in stock bro? If you got the plug lmk I’ll pay you extra

[@TryItWithTim]

They are in stock right now bro, mini floorboards version 2

[@that_mdrfkr4451]

@@TryItWithTim bro I can’t believe I fn missed them. I check couple times a day have for last month or so 😓