How to Install our Zbroz Polaris Ranger 2" lift kit with Nate

Nate walks us through how to install our NEW 2" Lift Kit for Polaris Ranger.
www.zbrozracing.com

[@juicechartier]

I noticed the break pressure switch has a red wire going to it, is that a break bypass?

[@zbroz_racing]

You know, we aren't sure. Thats a little out of the realm of what we do here at Zbroz. It appears so, but we recommend reaching out to your local dealer or reviewing your owners manual to answer that one.

[@jwoodham30]

What's the max size tire that can be used with this lift? Will 30" tires work fine and not scrub when making a tight turn?

[@zbroz_racing]

We haven't officially tested it, but 30" is a safe bet. We suggest getting the lift with the +2 forward a-arms. That will allow up to 32" and we have tested that.

[@chrisallen3741]

What do you do about the springs or even front end parts

[@zbroz_racing]

Leave the spring & shock in, unless replacing it with our EXIT shock. Reuse the factory hardware (nuts & bolts) to re mount the spring/shock to the now installed lift kit (hardware included). Then, if you choose, reconnect your sway bar.