How to Install Pentair IntelliCenter Wi-Fi Link Kit

[@anthony25403]

Thanks for sharing this video, this is the obvious for any regular tech , what about installing the outdoor controller in to a basement? Does the signal works the same?

[@ePoolSupply]

Yes it will work the same but there can be some signal interference due its location.

[@ulisesmojica9022]

Hey, thanks for your video, it's very helpful. But I have 2 questions. 1- how much distance is the communication between the two antennas. 2- You can connect a direct cat6 cable from the router to the intellicenter direct panel. To remove both antennas . Thank you

[@ePoolSupply]

You would need to contact Pentair as far as the distance goes between the antennas [phone]. You can connect a direct cat6 cable from the router to the IntelliCenter. Hope this helps!

[@Mishjedi]

Do I install it the same way onto an Xfinity Xfi modem ? The two are not communicating to one another so I’m not sure where the trouble lies

[@ePoolSupply]

For problems like these we highly recommend calling the manufacturer directly: Pentair Pool: 1-800-831-7133

[@mwahlert]

Two questions. One - on the control board where you connected the antenna kit - is that a native Ethernet port that can be hardwired if wiring is available? Two - does the controller have WiFi built in for circumstances where there is already adequate WiFi coverage?

[@ePoolSupply]

Answer to question #1: Yes Answer to question #2: No

[@michaelr5606]

Short and Sweet! Nice. What’s the screwdriver/nut driver? I’ve never seen that before and it looks interesting.

[@ePoolSupply]

We appreciate the positive feedback. Those tools are very useful and would recommend looking into get one.

[@jstickwins8172]

Nice buddy, It helped out a bunch.

[@ePoolSupply]

Glad to hear it!

[@thejakein7867]

Out of stock!

[@ePoolSupply]

Thank you for the comment. Good news, we checked and we have the Pentair IntelliCenter Wi-Fi Link Kit in stock! www.epoolsupply.com/products/pentair-intellicenter-wifi-link-kit