How to Install Pocket Door Frames (2 DIFFERENT DOOR MANUFACTURERS) Ep. 8

[@michaelmartin5995]

I never had a dad. It would have been awesome to have had someone to work with and have the kind of relationship these guys have. It is enjoyable to experience their relationship and craftsmanship. This is one of the best channels on KZbin.

[@galvanizedgnome]

Rotary club is a bunch of Luciferians in disguise. you are fooling no one with any sense.

[@marcdavenport6987]

@@galvanizedgnome Why you dunking on a stranger making a heart felt comment about about enjoying the craftsmanship and father son relationship in all the Stud Pack videos. Is it because a compass rose and a gear look vaguely similar? Very weird.

[@georgedavall9449]

@@marcdavenport6987 Marc, this just goes along with all the hatred and lack of civility in our Society. I’m not going to make this about Politics either. I just pray this Country can pull itself together before it’s too late. Let’s all try to have Compassion for one another, and try to understand where the other person may be coming from, or what they are dealing with, in their lives, before passing judgment or ridicule. Thanks! Stay safe and Healthy! 👍😁✌🏻🇺🇸

[@theodorecash707]

I guess I'm pretty off topic but does anyone know a good website to stream new tv shows online?

[@palettetools6461]

One of the best remodeling channels on KZbin, or any other network for that matter. Authentic content like this really makes KZbin shine. I hope KZbin never loses sight of this and remains an outlet for people with deep skill and knowledge who want to share it without the filter of producers and advertising.

[@chrisramirez3383]

Appreciate you talking about the differences between different door manufacturers. Awesome video!

[@javiergalvan242]

Paul and Jordan, what a team you make. Your Dad makes things seem so easy to do, I'm still scratching my head how the doors will be placed in the frame. I guess I'll see it on the next video. Have a great day and remain blessed. BTW keep the video's coming!!!!!!!

[@lpcmark]

Every time I see your screw driver bit stay in the screw, I feel that on a personal level.

[@ryanmacewen511]

I grew up in an old Victorian. The pocket door on that home is QUITE substantial. Cool to see what a pocket door is made of these days. Can't wait to see what the rolling hardware is like, and if it differs between brands. Love your channel. Glad to see it growing!

[@RoderickGI]

I have a 1970's hardwood framed home and was going to make a similar comment. Even the sliding door in my case is solid, like an external door. Heavy and sound deadening. Those pine framed pocket doors, and their mountings, look flimsy to me. I guess that is just the way it is these days. But I would probably want a heavy door between the laundry and the rest of the space to reduce noise.

[@thedalillama]

I'm in the middle of a remodel. The pocket doors are sadly flimsy. They seem to rely on the drywall adding rigidity.

[@jasonwiseman9984]

That's the most useful tutorial I have seen for installing pocket doors it addressed all the details that you run into when you're installing them

[@tomjeffries58]

I first used those anchors in the 80's. They are the best. You guys are better that all the pro improvement television productions

[@rsmith7292]

Thanks for the tip about making the two pocket door frames the same height. Like when you lined up the air registers in the ceiling... it's the details that make your work great!

[@brosier]

Best home improvement channel on KZbin I learn something new every video

[@FrankieGN]

Fantastic instructional video...I must say, when describe what your doing, you make me feel like I'm listening to "This Old House"....very clear with every step!

[@StudPack]

Thx frank 👍💪

[@williamgossard6012]

Clear concise directions and you left nothing to chance.... best I've seen on the web. Not afraid to tackle this job now......You won me over with "Little League Baseball" for sure

[@marcdavenport6987]

I've really been enjoying all the Stud Pack videos since I started following along to the last bathroom remodel. It's a font of knowledge and at the same time a reminder to rededicate to craftsmanship by way of preparation. One thing I really like is picking up all the subtle thinking that is going on when planning things out. Anyone can read instruction manuals, but getting insight into the potential pitfalls and heading them off ahead of time is the "apprentice experience" that keeps me coming back. In a recent video I saw you not want to repeat yourself(maybe why installing the second LVL) and instead said go look at the previous video; Please, repeat yourself. The more times we hear some of those things, the more they become clear. Also, I've gone back and re-watched early videos and I noticed the editing style change. Your craft for making a videos has really matured. Graduating from "this will be a cool shot" to a more informative narrative arc. And the sound levels have really equalized. It is an awesome evolution. No knock on the previous videos, but the new ones are more informative and just as entertaining. It's cool to see the two crafts evolve side by side.

[@kevincromwell4590]

Hey you guys Rock I'm a contractor always learning from others. Good to see father's and sons working together and loving what they do.

[@StudPack]

That Like Button is looking a little crooked Gang! Get your laser out and make sure that sucker’s lined up!

[@jdspecht682]

I drove a screw into that Like button to keep it in place.

[@hansangb]

@2:58 at @5:26 I'd highly recommend some Wera RapidAdapters. Life too short to constantly have to struggle with bits and screws that fall off the drill. 😁 Wera lets you change bits out and it's a one handed operation - game changer when you're holding stuff and still need to do a bit change. And the magnet works really well.

[@cineaste1969]

I never get tired of saying it another great, informative video. On so many different levels. I notice more and more how many people comment about the great relationship you guys have. I wish I had a dad like Paul too. Getting to work with him and learning from him is just the best. This is by far my favorite channel on KZbin. I can’t wait till you guys break 100,000 subscribers and beyond. Keep it up. 👍🏼

[@michaellee695]

Thank you for taking the time during your job to record and explain in detail the installation of the pocket doors. I very much enjoyed this video, so thumbs up. The most important thing is thank you, thank you, thank you and thank you again for not adding that ridiculous music to this video. Videos without music get an automatic thumbs up.

[@richardbennett22]

I have always liked pocket doors for certain applications and these 2 work out perfect here. Great detailed info here and wonder what we would do without lasers now...Lasers are money well spent and a time saver.

[@Mason-nm1vf]

Man this is a GREAT video! Many thx to you for taking the time to video and post this. So help. So clear and easy to understand.

[@josephdoak991]

Honest videos. You always do a proper job. And you work on actual , real world projects. Not in a studio or contrived situation. JD Clearwater FL

[@nickbrunette8292]

Fantastic video, great insight and love the extra insight in adding 3/4 blocking.

[@pariah113]

Outstanding video. Great information, fancy footwork, and no silly music. Well done.

[@jonnyb8891]

Very detailed video. Great step by step. Easy to follow. I am pretty decent with carpentry but have never seen how these go in and this was a GREAT walk thru and I will definitely be returning to this channel in the future.

[@joybuz]

I love the show. I'm a DIY homeowner and your videos have been extremely informative. Currently I'm having my kitchen remolded by a solo guy who I know does great, thorough work. The guy is backed up for months just like I'm assuming y'all are. I personally operate an online retail business. Being in operations and management, a big part of my job is understanding the value of my time along with the value of my employees time. Therefore, I don't want my accountant vacuuming my office because I pay her a premium wage for premium work. I could pay someone much less to vacuum my office. The point is, Paul has some amazing skills along with the contractor doing my kitchen. Why does it seem like a lot of contractors do all the work themselves instead of hiring more help to do the grunt work? Seems like bad time and skill management for Paul to be sweeping the floors. Keep up the good work! I really enjoy watching the show. I've just been curious about time and skill management ever since I started working with contractors. Although I will say, it seems like roofers have it down to a science.

[@donhartfield]

I appreciated this post because I really understand it, but construction on a scale of theirs probably does not get to that fine of a detail. If they were a crew of like say 10 guys who broke up into 2-man groups for separate jobs, then I could see a small team of 2-3 guys who did "grunt" work between all of the projects. In their case, it's probably a fixed rate job versus hourly rate. They aren't really losing that much to clean up. Plus, imagine the days where it's perfect weather, but they learn their materials being delivered are a day late so they lose a day. Construction has some weird flex to it that all works out in the wash.

[@alanslusher2741]

End of day cleanup is one of the trademarks of a true professional. No reputable contractor would make a mess, and then expect someone else to clean it up. Leaving a job site clean at the end of a day goes a long way toward pleasing the customer, and provides time to organize your tools and site, so you can get right to work the next morning. The stud pack shop vac gets used often, and it’s great to see!

[@lonnieblackwell5107]

Not a contractor, but have friends who are. Small contractors have the challenge of too much work, or not enough. As a result they can’t keep employees around for low skill work when it is not consistent. Also this work is so varied much of it doesn’t require a skilled craftsman who would be idle part of the time if not doing something. Anyone in this business wouldn’t survive the first job if they tried to direct people only do work that fit their skill set.

[@asaturn]

this randomly came up in my feed when I was about to install some pocket doors. this is perfect.

[@LaurieKirchmeierA2]

Excellent video - I just installed a marwin pocket door and the video helped to make the install go flawlessly. Could not be happier with the result. Thank you.

[@StudPack]

That's awesome thanks Laurie!!

[@Sean-tc7jm]

As a teacher, you sir have the heart and soul of the best educators. I would love to see y’all partner up with Jeff and Max at DIY Renovision in a North meets South team up; y’all seem to have such similar personalities and philosophies.

[@dedersamorano2786]

You should do a video on framing a Dutch Gable/hip roof roof. I love your teaching.

[@leebannister3759]

Great video, the kit I bought said width is 2D + 1 1/4 but then I actually measured the header rail piece and it needed 2D + 1 1/2. Read and verify for any rough opening

[@Aepek]

Think every newbie apprentice has installed a pocket door header backwards least once, lol, I k is I did my first time🤣 Absolutely LOVE the attention to detail and how you guys “deal” w/ old houses and “obstacles” from the way they were built back then.....you make sure it’s done “right & safe” before moving forward w/ construction. That’s great (I’ve been on projects working w/ crews that “just get things done” so can move to next....I’m sure ya know what type of houses I’m talking about😉). So so so glad found your channel during the “quarantine” issue; as it’s been great watching you both. Cheers✌🏻

[@MarietteIsMusic]

Beautifully THOROUGH video on pocket doors. I watched around 10 before installing and this was by far the most informative. Thank you so much!

[@OnlyOneFever]

Unique install with two intersecting pocket doors. Good job.

[@adammartin9332]

Whats the plan for door casing on the right side of the laundry pocket door where it meets the pantry closet door?

[@jackthomas8185]

Great Originality With Conviction - Learner DIYer question regarding the small cripple stud - You nailed into header - You screwed into head plate Why not screw both - Is there any real difference in screwing or nailing? - What is better for what purpose - Which is stronger - Does screwing enable you align and join CAREFULLY both pieces as a nail would need to be put in 1 go not allowing for correction - As sometimes nails & screws when in final position can alter the fine alignment of the 2 pieces - SORRY LOT OF QUESTIONS

[@motor2of7]

You framed the rough opening 1 3/4 wider than the door but then installed the door all the way against the left side of the framing. How will you fill that gap for the door to close against? Also, where the Johnson door butts into the Marwin door, will there be some finish trim or something so the door doesn’t close against drywall?

[@Reevesi]

Step by step as you go... I Love it. I would seriously pay for you guys to renovate my house while explaining what your doing as you go along. Great job as usual guys. A+++

[@aholesen]

Thanks again for another great episode. In Europe (Denmark) a lot of our details and ways of building are different yet I learn a lot from your videos. Lots of great tips for framing and using the laser, fasteners, doing details etc. Keep up the great work!

[@FixerMerlin]

Great video. I installed a pocket door in a high traffic area which once and it was real flimsy so I skinned both sides of the door frame with 3/4 ply. It really stiffened it up and allowed for longer screw penetration on the side that required cabinets.

[@fastj1962]

Hey guys you are pretty crafty and I might have mentioned this before somewhere else but when you have metal that's bent like the track in the header you can use a crescent wrench. You would not believe what issues I've fixed with a $.25 chinese crescent wrench out of a cheap toolkit when I'm in a fix. Not sure if it would fit in this situation since I didn't see a close up but keep it in mind. You can also use two together if need be. you just tighten the jaws on the metal and bend it, or put the second wrench on the handle of the first and twist it that way. Keep up the good work.

[@defreitasenterprisesllc1046]

Doing my first pocket door in a few days. Paul, looking back on this video do you think it would have been better long term to put the header over the second door and screw the pocket track / header to it? I feel like it will settle over time being just 3/4" lumber

[@lossless4129]

This channel is awesome, love the style. Reminds me a lot of my grandfather teaching me fundamental how-to's when I used to help him with his projects. I wish I could go back but at my age now and be more help and enjoy those times. Great watch!

[@FernandoRodriguez-ds5ri]

Great team work makes the dream work! Was hoping to see some scrap stud to be packed in between the wall and the new 2x that was added onto the second door, I thought that would’ve helped for the long run to add support to the frame with every time the pocket door is pushed opened and beats on the back stud. This are my .02.

[@yepper1165]

Very nicely done and great results! Only thing I would add is another board on top of the last door header for a nailer when the trim goes on. Nice job.

[@StudPack]

I did that later 👍💪

[@MrErniev]

Which brand is better as far as construction and wood quality? Great video.

[@theDougAngle]

I really like the way you guys work and Paul, your explanations of what AND WHY you do what you do are great! Keep it up.

[@adamtrask4822]

Thank you very much. A very much needed to watch video, I'm putting in a pocket door in my "tiny house." Thank you again.

[@mgb961]

tidy work...attention to detail is impressive.

[@OneManSays]

Thanks for the great video on pocket doors. I’ve never installed one and I’m about to install two of them. After watching, I feel very confident about doing it right.

[@StudPack]

Thx Matthew 👍💪

[@bjnopoli]

Very good video. Almost seems like its easier to install a old work pocket door in New framing.

[@kylieharrison3782]

I haven't seen any pocket doors in the culture where I live (Perth, Western Australia). I must say though having watched your video that pocket doors are a great deal more practical, aesthetically pleasing and more quiet than, just common to us, sliding doors.

[@StudPack]

Thx for watching Kylie. Would love to visit your part of the world 👍😎

[@edwinmiranda8174]

Loved ur video. When you showed the hangers from different companies it seems that the Marvin hangers looks robust, stronger and better manufacturered than Johnson correct if I am wrong????? According to your experience which is easier to install pocket door Johnson or Marvin???? And which one is well manufactured?????

[@c.dufresne3468]

Hi guys! I came across your video which explains the installation of a pocket door. Great job well explained. I would like to install a towel rack on the wall of this door. Is it realistic to think it can be done (I know the door is made of 3/4 inch lumber behind the gypsum) but will it be strong enough? If so, what screw length do you recommend? Greetings from Quebec, Canada.

[@franciscovega7325]

Again ..Great work Gents. .. You mustve played baseball or coached baseball .. youre always wearing something with baseball .. thats great cause i grew up playing baseball here in H-Town .. Also .. Let Jordan know i said ... GO ASTROS ..

[@TricksterTimbo]

Recently discovered you guys, I have got to say your knowledge and craftsmanship definitely shows in these videos. Keep it up!👍🏻

[@aulistar1325]

Love channel and the episode, I’m curious I didn’t see vapour barrier or something between concrete and spruce/pine. Is that not code where you all are at?

[@jessicahites871]

Love the pocket door layout! Much better than what they had before!!

[@dnc_fabrication]

Hey, love the video. You guys rock and inspired me to do some of my own frame work. I have a question I'm building an ada bathroom with a pocket door, where i plan to put the grab bars is on the pocket doorframe. much like the issue you ran into this video where you used 3/4 in the void. If I do that for the grab bars do you think it will be sturdy enough. Or should I do it the old way like build 2 normal (2x4) walls with a gap then essentially make my own door. Also do you have to worry having untreated wood on concrete.

[@BWIL2515]

Great Great explanations of installing the pocket doors

[@bubba007sss]

I have been doing this work for over 40 years now and I can honestly say that I have never installed a pocket door, but now I have installed lots of doors though.

[@colinwaller7284]

Excellent. You guys are a great duo. Great balance of detail/know how and video production. This should be a number one DIY type channel. Really enjoy.

[@steveyoungs6588]

Can you please send me the link to where you purchased that laser level mount and extendable rod you use. Great, informative content. Thank you.

[@CARyan08]

I look forward to seeing how you are going to finish trim the pocket door that closes into the other pocket door. Pocket door T intersection. LOL. Looks like your will need more 3/4" ply backing in the door that goes into the pantry.

[@jeanneediger4955]

great video, thank you; i am installing this pocket door now for a water closet in the master bath.

[@xcaliber5592]

I sure do like how you offer details about your decisions. Keep uploading. Thanx.

[@JimmyGOliver]

What kind of laser are you using? Do you like it? Or would you recommend a different one.

[@wiboater4]

Have you ever cut a pocket door down to fit it into a shorter rough opening on existing construction? I have some ductwork that limits my rough opening to 81 inches. The door I bought say's 84 for rough opening.

[@pablooolivaa7586]

Good work guys , that was good work how you make it work the second door nice

[@MrTooTechnical]

Great work. Did U go in the attic and add the diagonal brace for strength?????

[@slawomirnowak753]

Hi, Paul and Jordan I stumbled upon your guys channel and watched all the videos. I subscribed after the one episode I watched. I love the way you guys go into detail and explain how, why and what products to use.

[@tedmcdonald3377]

Always enjoy your videos!!!

[@SamanthaHartzell-i4u]

Most informative video I have found! Thank you so much!

[@CARLOSTREUIL]

Are you going to show the hanging of the pocket doors with the trolleys and their alignment. I would be interested in seeing how it it done. Also for shallow depth shelving what is the maximum length you can have a shelf before shelf brackets are needed?

[@kevinr3263]

Smashing the like button was the least I could do to repay you for all this epic content

[@ConspiracyTheoristDaily]

I love every video you guys put together! Awesome work

[@StudPack]

Thank You Bobby!!

[@PyroPolo]

Did I miss the part where you installed the final piece to the door jam where the latch might hook on to? The right hand side if your facing it like you are.

[@POLOLOUS3]

Basic johnson's are so cheap. After a couple installs I always upgrade the kits to better quality ones. They come or can be added on soft closers which are nice.

[@lamber62]

The instructions or plans that came with my 24" x 80" pocket door that I got from Home Depot, Steves Single Pocket Door Frame, for the rough opening it says 50 1/2" wide x 84 1/2" height, that varies slightly from what you instructed in this video, a little wider by 3/4 of an inch I believe because I thought you said twice the size of your door plus an inch and 3/4, anyway should I go with the instructions included with the door or go with your recommendation on the video? Looking for some clarification before I build the frame for the rough opening, thanks, very good instructional video.

[@StudPack]

Yes always go with manufacturers instructions. I guess nothing is standard anymore 😂👊

[@Chamillionaire1312]

for a new build do you recommend the johnson for new construction?

[@likearockcm]

Pocket doors are great but I wouldn't use them in bathrooms or bedrooms due to privacy concerns .Nice work !

[@jjooeegg1]

I don’t get ya . How are they less private ?

[@stacieskelley]

That's why you use a pocket door/ privacy lock

[@john.french]

Pocket door slammed into the like button! Another awesome 📷!

[@VHTim]

Hey, great job on filming and editing!

[@patvirgin8822]

Have you ever installed a pocket door without tearing out both sides of wall? My wife would like a pocket door during her bathroom remodel. The problem is there is a hall linen closet and drawers for most of the door wall. Thank you.

[@Power5]

Never installed a pocket door before. Probably never will. Great tips in this video. I have a question about the framing of those pocket doors though. Clearly there is no 16" on center vertical stud. There are horizontal studs, but will that wall be flexible, when pushing on it, with that much space between the boards?

[@StudPack]

It does flex a bit but it’s not too bad

[@sharonbowers5117]

Do you have any preference of the Marvin over Johnson?

[@ZachAuclair]

Great tip about the plywood.

[@steelhiker]

I noticed your Williamsport LL shirt. I grew up near there. How are you connected?

[@dianeogg7424]

Do you have any suggestions for a double pocket doors. This seems to be something not done here in the USA. I really do not want to buy 2 pocket door kits and try to line them up but can't seem to find a 96" track

[@allisonkendall]

Thanks for this great video! I am a beginner--do you show how to put the actual door in place in another video?

[@firemanj35]

So question? I noticed you didn't just use a tapcon to secure the doors to the concrete. Is it because you used wgat came in the door kit or is that just the way you prefer to do it?

[@StudPack]

Tapcons are fine if they work for you. They are hit or miss for me

[@benlester157]

Great video and very insightful. Nice work guys, I’ll be watching more videos and recommending you to others!

[@victormurillo7738]

Great video step by step after I seen a couple yours motivated me thanks buddy.

[@alexoden8920]

I’m curious to know how you guys go about bringing tools to the job site. Do you guys plan each day and only bring tools relevant to what you plan on doing that day or do you throw everything into the truck and bring it all every day? Great video as always.

[@romanrivera6588]

Thanks for that! I’m hitting lowes tomorrow, Home Depot has plummeted in quality..

[@joshuabenkman3547]

Best instructive video I’ve ever watched 🤙 AWESOME

[@Castrum450]

How do you get the door into the pocket as the opening is narrower than the door?

[@TheSidneySmith]

Did you consider flipping the bracket on the second door? Not sure of how the bracket was fully designed, but since you were adding a 2x4 block above it...might have been able to flip it and screw it instead of adding the 3/4 ply. The 3/4 ply is a nice reinforcement to keep the door square over time though.

[@msamuels5420]

My wife and I are wanting to put in pocket doors. Of the ones you all have put in, what are your thoughts or suggestions on brands?

[@mrsmith5320]

Great video as usual, but where's the link to the anchors?

[@SierraOne]

Pocket door Kings are you! Great Video

[@StudPack]

Thx Paul 👍