How to install portable AC unit when you have casement windows (or crank out windows)

Рет қаралды 36,503

Жыл бұрын

Here’s how I have installed my portable AC units when I have crank-out windows, also known as casement windows. It’s not as straightforward as when you have a single hung window, but it’s not that complicated either. This project took me about two hours of work.
AC unit: amzn.to/3Ui6dtt
Circular Saw Blade for plexiglass: amzn.to/3Nm6JmO
Jigsaw Blade for plexiglass: amzn.to/43vS26m
Ace Hardware Links:
Optiplex sheets: acehardware.dttq.net/NkzPe2
Circular Saw Blade for plexiglass: acehardware.dttq.net/QyJeG3
Jigsaw Blade for plexiglass: acehardware.dttq.net/rQGb0v

Пікірлер: 45

@jasoncompa199 Ай бұрын

Holy cow I had this problem and I was looking for the solution and think I just got it thank you bro 👌🏻

@oldcountryhouse 11 күн бұрын

You’re most welcome. Hope it works for you.

@velocity4260 Ай бұрын

Bloody excellent solution, thanks for the video man!

@PattyPiazza 4 ай бұрын

Brilliant solution that anyone can do!

@oldcountryhouse 4 ай бұрын

Thank you!

@mediterra1 2 ай бұрын

Why not just use the insert that came with it and then plexiglass for the remaining part of the window? Seems like it would be a lot easier at least. That's what I was planning to do.

@eugeniocg3079 Ай бұрын

same - how'd it go?

@velocity4260 Ай бұрын

Yeah, but his method looks a lot cleaner.

@jroc01 Жыл бұрын

This is great, I'm thinking about getting a portable A/C but im in a basement and i have a single louver window with a screen.I think this would be a good solution....thank very much.

@oldcountryhouse Жыл бұрын

Thanks I really appreciate the feedback. The easier option (but would block out light) is to use some heavy-duty cardboard.

@PandaMan21086 11 күн бұрын

I noticed that the crank window isn't open all the way, is it okay to just leave it partially open or is it better to just leave it fully open or maybe no difference at all?

@oldcountryhouse 11 күн бұрын

Opening just a little might not allow the air to move freely (you don’t want to be sucking back in the ultra-warm air you’re also pushing out). Though that won’t be an issue if you only have one hose. I don’t think you need it open entirely (mine does not up to a 90 degree angle anyway), just enough to be pulling new air).

@gsquaredmke Ай бұрын

How do you keep rain or bugs from coming into the vent?

@charlesgunton2371 4 күн бұрын

Why didn't you use glue for the side cut it right size

@parkeroien Күн бұрын

How did you get the vents to stay in the plexiglass.

@DonkusMaximus Жыл бұрын

Thanks for the video. I had ordered the Hisense 8K BTU 4-in-1 portable A/C from Costco and was wondering how to fit the exhaust panel to my crank-out windows Looks like you might have the same portable A/C. Where did you buy the Duraplex (sp?) from?

@oldcountryhouse Жыл бұрын

Thanks for the feedback. It’s been working well so far. I got the duraplex from Lowes.

@jnbond 11 ай бұрын

Thanks for the video and tips. Question: couldn't you have just used the window vent piece provided with the ac unit, and then just cut the duraplex to fit above it? So you wouldn't need to cut out the vent sockets? Seems easier, but also having the whole window duraplex looks cleaner I'd suppose.

@oldcountryhouse 11 ай бұрын

Good question, yes I could have and indeed thought about. Couple reasons I didn’t though. Most importantly I wanted to make it easy to close the window without having to remove and reinstall anything, which I can now so the set up is there for the whole season. Secondly I didn’t want to factor in angle joins that would be needed. Finally I wanted something that would be ‘snug’ in the screen slot…if I did it the other way and someone opened the window a faction of an inch more it would be loose right away.

@katerynakorniienko5964 Ай бұрын

Hello, how do you fix the plexiglass to the window frame so that it doesn't fall off, and get stuck to the frame?

@oldcountryhouse Ай бұрын

Basically I made it a really snug fit. Then I used masking tape, which work really well on two of my three windows. In the window it didn’t work so well, I tapped a really small nail partially in.

@darrenschmidt43 Ай бұрын

Did you need to secure the vent openings/hoses to the plexiglass? I’m going to be doing this, but don’t want the hoses to be falling out.

@oldcountryhouse Ай бұрын

The end of the hose had little clips on it, so as long as it was a snug fit, it clipped/snapped into place nicely.

@jim7971 Ай бұрын

Your idea is a good one! The only thing is your setup is not burglar-proof. If you run that at night with no one in the room, it can easily be pushed through. There must be a way to make this type of setup secure to a casement window?

@R3TR0--93 Ай бұрын

any window ac can be pushed in through from thieves

@johnwang9914 4 күн бұрын

My guess is that if no one was home, you could just have the AC shutoff and the window closed... Window AC's have always been a security risk unless you bolt them into a support frame underneath that's bolted to your house. However, I think that it would be worthwhile to look to see if there are any government subsidies for a heat pump to be installed as that could make up the difference between a professionally installed heat pump either split or central versus the portable units. Of course, if you're renting, the portable units might be your best option.

@nehaegbert3917 24 күн бұрын

What size duraplex do you use? thickness wise?

@oldcountryhouse 24 күн бұрын

I can’t remember what I used when I made this video but when I remade them this year I used 0.080 duraplex, and it’s ok in my small window, but not sturdy enough in my bigger windows.

@ceejaydeesoozaa 21 күн бұрын

u look like roger federer

@oldcountryhouse 17 күн бұрын

I wish I played tennis like him

@iazndreamuri 9 ай бұрын

What do you do when you have a screen for casement windows?

@oldcountryhouse 8 ай бұрын

I removed the screen and used plexiglass. No need for the screen while I have the AC unit installed.

@MadApplesWA 3 ай бұрын

Can you post the link to the air conditioner so I can buy it on amazon?

@oldcountryhouse 3 ай бұрын

This looks like the only in stock version of my model that I can see right now. amzn.to/3Ui6dtt

@MadApplesWA 3 ай бұрын

@@oldcountryhouse Thank you! ❤

@UNGL8R 6 ай бұрын

Bro, could you have just cut a round hole in the window glass (like you would for a cat door) and put a standard 100 mm fitting through that?

@oldcountryhouse 5 ай бұрын

Probably, but would have required a new fitting. I was just utilizing the fitting that came with the AC unit.

@bw4680 Ай бұрын

You are a fool! You aren’t understanding what @UNGL8R is saying! You way over complicated the whole process! It’s a simple job. No need to make it more expensive, complicated, and intensive.

@mfrem22 Ай бұрын

Does all the heat stay out? Or does outside heat come inside

@oldcountryhouse Ай бұрын

The plexiglass has almost no insulating value (R0). Most heat will around the edge though, so good tape will help.

@187g 27 күн бұрын

i though of a similar idea butt my casement window doesnt have a slot for fly screen. could not figure out how to mount it. please help :(

@oldcountryhouse 26 күн бұрын

Would some strong tape hold it in place? Or 3 or 4 small nails?

@johnwang9914 4 күн бұрын

Maybe consider magnetic or velcro tape. You just want to attach something with a reasonable seal to the window to close off the window except for the hoses. I'm surprised no one is doing a Saran wrap and duct tape solution. They even make heat shrink film to seal off windows for the winter that you might use.