How To Install - Review - Fender Eliminator Kit - Kawasaki KLX230 - Dual Sport ADV

Picked up this DRC Hardware - Fender Eliminator kit from www.wheelingcyclesupply.com here in the US. I think it really cleans up the tail end of the KLX230. Took about an hour to install and was very straight forward even without any details instructions.
#Kawasakiklx230 #motocyclecamping #FenderEliminatorkit #KLX230

[@theseedsoflifebali]

Probably the most peaceful how to do anything video I’ve ever watched. I feel like I’ve just meditated or something. Thanks mate

[@SBC-Dualsport]

Glad you enjoyed it!

[@smartliving4464]

5:55 Just put one of these units on my 2024 KLX 230 S model (made in Indonesia) and paid particular attention to these small plates when I first removed them. On my model, as I removed them, this plate was reversed (the nut was on the back side and was not visible from this angle) which makes sense when you attach and screw on the second covering plate, everything else is the same as your video. Not sure if they updated their design or if they were always meant to be this way. Great video by the way, cheers from Australia 😊😊

[@SBC-Dualsport]

Thanks for watching! It may have changed since I made this video. THanks for leaving this comment for other that may be installing the same rack!

[@markallen8037]

Just purchased a 2022 KLX 230se. I'm going to be using your videos for a lot of DIY upgrades. Great videos, thank you!!!

[@SBC-Dualsport]

Right on! Glad you enjoyed them.

[@colpitts350]

Loved this video. Just bought myself a KLX230.

[@The_Sweet_Life_99999]

Great video, very well made. I love my KLX 230 but since it’s my first bike I’m still a little insecure about working on it all on my own. This video was very helpful (and I love the double take mirrors, after seeing them on your bike I might order some for myself as well 😁)

[@SBC-Dualsport]

Thanks for the comment! The KLX230 is a great bike as your first bike. Not a ton of videos out there yet, but they are one of the easiest bikes to work on. Enjoy the Bike!

[@mojomike3913]

I'm discovering tht the stock mirrors leave much to be desired. I have a broad upper body/shoulders and I can't see anything behind me in them. The new mirrors are on the bucket list for mods in the future. So far I've put on a PMR Tail Rack, Ricochet Skid Plate, Tusk D-Flex Pro Hand Guards and ordered the Fender Eliminator Kit.

[@markbarboza1407]

I almost feel like I'm watching a Bob Ross video, very relaxing and informative. I just bought a '23 KLX 230 s and am waiting for delivery. Can't wait!!

[@SBC-Dualsport]

Thanks Mark! I was going for a Bob Ross/ Barry White vibe!

[@chrisrobinson1613]

Great video. Couldn't of done it without out. Thank you for your time

[@shannonmcatee9610]

Haven't even picked my 230 up yet n I wanna order that. Looks good

[@SBC-Dualsport]

Thanks for watching!

[@billcushion1049]

Great custom seat foam choice, I had Seat Concepts on my klx250

[@SBC-Dualsport]

Thanks! Helps on the longer rides to the trail.

[@1234Krank1234]

great video, you really helped me on doing a similar project

[@SBC-Dualsport]

Glad I could help! Enjoy th eride!

[@quadsquadgarage]

Currently trying to decide between the KLX230 and the KLX300.

[@SBC-Dualsport]

Thanks for watching! If I had to do it over again I'd go KLX300. More power for the highways.

[@1122redbird]

Good video sir. I noticed your Seat Concepts seat. Did you make a video on installing that too? Mine is due to arrive soon. I like your way of explaining things, nice and clear.

[@SBC-Dualsport]

Thanks for watching! I did not. There are a ton of them out there that show how to do it.

[@1122redbird]

@@SBC-Dualsport No worries, I already got mine and installed it! But please keep making vids on the KLX230 as you do mods and maintenance. People like your calm way of explaining.

[@JBK647]

Good video, easy to follow & helpful.

[@SBC-Dualsport]

Thanks for watching! Glad it was helpfull!

[@mojomike3913]

I struggled to find this item in stock anywhere in the US. Ended up having to order one out of Canada.

[@SBC-Dualsport]

Thanks for watchiing! I think the link I provided no longer works. I have had simmilar comments about sourcing problems. Glad you found oone.

[@mojomike3913]

@@SBC-Dualsport oh and thanks for responding! How do you like that Seat Concepts Seat? Did you by the foam kit or did you buy it that way? Might be my next upgrade.

[@mojomike3913]

@@SBC-Dualsport there is a similar item on Amazon www.amazon.com/crazy-sport-KAWASAKI-Motorcycle-Eliminator/dp/B0B1VR3KKB/ref=sr_1_1_sspa?crid=13QRPQO9EYQE2&keywords=klx%2B230%2Bfender%2Beliminator&qid=1682362444&s=automotive&sprefix=klx%2B230%2Bfender%2Beliminator%2Cautomotive%2C165&sr=1-1-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExUzFESTM0NzhHVk9CJmVuY3J5cHRlZElkPUEwMzg3MTkxN0hJME9QSFNTVjBaJmVuY3J5cHRlZEFkSWQ9QTA1MTU4MTUyNU0yUlZBQVdXVEI2JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 Reviews make it sound like it's stamped from soft aluminum or pot metal. Hope the DRC one is worth the extra $ and made from steel

[@SBC-Dualsport]

@@mojomike3913 I purchased the foam and cover kit. Easy to install if you take your time. I picked up an air stapler from Harbor Frieght on the cheap. I have used it on two seats now and worked fine.

[@jaygoldstein5449]

I wish all “how to” videos were as nicely done as this one. Looking forward to a report on how the fender eliminator holds up when exposed to dirt/rocks/water thrown up by the rear wheel.

[@SBC-Dualsport]

Hi Jay! Thanks for the kind words. I'm interested to see how dirty my back gets without the whale tail....lol. I'll post back here after a sloppy ride.

[@nickjacobs4265]

I love your videos keep them coming

[@SBC-Dualsport]

Thanks Nick! More to come!

[@nickjacobs4265]

@@SBC-Dualsport i just got the same bike and i love it. Gonna get some cool mods as well

[@paulbellia659]

Very good video with clear instructions, Thanks! What was the 4th factory wire for that you didn't need to plug into anything?

[@SBC-Dualsport]

It's been so long since I did that video. I believe it was for the license plate light. Thanks for watching.

[@tallens5280]

I'm wondering what brand of seat you used and how it is compared to the stock. This tail kit looks better than some and easy. Great video.

[@SBC-Dualsport]

Thanks for watching! It's a Seat Concepts lowered seat. Made a big difference in touching the ground and comfort.

[@NickMoissis-td2cp]

Nice video. Can you or someone give me some insight on how to change my wire harness mice ate the wires😢.

[@SBC-Dualsport]

Thanks for watching! Yeah, wireing is not really my speciality. I'd start with a repair manual and try to mend each wire that was seperated. Good Luck!

[@toddj.8245]

great video thank u so much love the way u explain and show this install !! where did u get the fender eliminator kit ?

[@SBC-Dualsport]

Thanks Todd. I haven't been able to find a new link since the one I post went out of stock. You might have to search around with the part number in the description. Cheers!

[@katerinneflorez6350]

Great video! Where can I get that fender eliminator kit?

[@SBC-Dualsport]

Thanks for watching! I think the last person commented finding them on Amazon or Ebay. The company I purchased it from no longer offers them on their site. Good luck!

[@duanerush]

Hey great video…i just bought the exact bike …where can i buy the same part you used? … i went to DRC website and no way to order one …please help lol

[@SBC-Dualsport]

Hey, Thanks for watching! A few others have mentioned that the site I posted no longer offers this product. Some have found it on Ebay and other sites. Sorry I don't have more information.

[@TDubsKid]

looks 10x better, I will put a fender eliminator on any bike I get. how are you liking the waterproof E12 saddle bags?

[@SBC-Dualsport]

I'm really liking them. I purchased them after watching one of your videos even though your are made of a different material. They really tighten down tight and don't move much and seem very durable. I'm hoping to get out in your neck of the woods (Colorado) this summer. Need to find me some talking rocks!

[@echols2010]

Do you have a video of how you installed gas can

[@SBC-Dualsport]

Thanks for watching. I don't have a video of the RotoPax install but there must be a million of them out there. Just search " rotopax mounting" and you will find one that matches what I did.

[@toddj.8245]

You stated there are 4 wires to dissconnect It looks like you only connect 3 back was there one left out for oem license plate light ?

[@SBC-Dualsport]

I think the fourth wire didnt need ot be disconected in the end.

[@thatboyjgorm]

great video! could you provide the link to the eliminator, i've been looking but can't seem to find the correct one

[@SBC-Dualsport]

You can pick on up on Ebay I believe. Search for DRC - ZETA MOTO LED EDGE2 Tail Light Holder. Thanks for watching.

[@resiliencycommand]

I just got the klx230sm!

[@SBC-Dualsport]

Enjoy the bike!

[@loveisallweneedify]

Hello , where you got your muffler and seat ? I have the 2023 klx 230

[@SBC-Dualsport]

Thanks for watching. The muffler is stock and the seat is from Seat Concepts.

[@TheFretFighter1]

How did you mount your rotopax ? Did you need to drill holes mine doesn’t line up with the oem rack.

[@SBC-Dualsport]

Thanks for watching! Yes, I had to drill new holes for the rootpax can.

[@mistuhyeh]

Thanks so much for posting, I received my DRC hardware kit earlier this week and was able to install it last night! Your video had a clear breakdown of what to expect, and the rear end definitely looks much cleaner. I ended up adding some shrink tube and electrical tape to the wire/connections that are more "exposed" due to the fender removal and I was scared of water/dirt going directly into that underside area. Do you think that I would have to cover that area if I'm washing the bike?

[@SBC-Dualsport]

Hey Jason, thanks for watching! I would hope you could hose off a dual-sport bike with a hose and not worry about where the water goes. I do think this mod would put it more at risk for water issues.

[@mistuhyeh]

@@SBC-Dualsport appreciate the response! yeah, I'm considering finding a way to make an extra panel cover for the underside so at least the wires aren't fully exposed. I saw some people chop up their existing fender but I'm doing my best to avoid doing that. I have yet to trek out into off road areas but looking forward to utilizing the most out of this dual sport!

[@danbaumiller5242]

i can't find this product for the KLX 230 on wheelings website.

[@SBC-Dualsport]

I found the dealer had access to a few at teh time the video was made. MIght try there! Thanks for watching!

[@evanadkins9719]

What’s that seat you have on there? I can’t find it or find a video how to install it I want one

[@SBC-Dualsport]

Thanks for watching! It's a Seat Concepts seat, low version.

[@LesLent1]

Just bought a 2021 KLX 230 and love your videos. I can't find the fender eliminator kit you showed. Any help?

[@SBC-Dualsport]

I purchased mine here www.wheelingcyclesupply.com/shop/product/edge-tail-light-kitklx230-20-/2774. Hope this helps!

[@chrisrobinson1613]

I got extra wire harness left. I think it went to original license plate light.. Also the washer s in kit didn't fit bigger bolts

[@SBC-Dualsport]

I had the same issue with the washers. Sent the manufacture an email and never heard back so I just picked some up at the hardware store. Thanks for watching!

[@dogmandan79]

this is a good “how to” video.

[@SBC-Dualsport]

Thanks for watching!

[@wescampbell9105]

Where did you buy the part from? It does not look like DRC sells direct.

[@SBC-Dualsport]

You can pick on up on Ebay I believe. Search for DRC - ZETA MOTO LED EDGE2 Tail Light Holder. Thanks for watching.

[@wescampbell9105]

Great video!!

[@SBC-Dualsport]

Glad you enjoyed it!

[@randywilde9998]

Great video but now it’s not legal as license plate is not illuminated? Just bought this bike and want the shitty fender off, eBay kits I’m wary of, course I live in Canada any advice bud?

[@SBC-Dualsport]

Thanks for watching! The light for the plate id on the brake light which didn't change. I don't have the bike anymore , but I never had an issure here in California.

[@CaptainFury767]

Well done. Go Bears.

[@SBC-Dualsport]

Heck yeah! Go Bears!

[@Lomez07734]

Kinda unrelated. But do you think the monkey or the klx S would make better 7 mile one way commuter? Smooth roads, max speed 45. ? Thanks!

[@SBC-Dualsport]

KLX for sure, for comfort and safety reasons. The monkey is so low I fear people can't see me from thier cars.

[@grandpa7278]

Brought one for my adult daughter to learn ride on the street, she rode quads in the dirt. First sight I hated the black Fender, daughter didn't notice past the shiny green plastic. Lol Since for street riding, mostly, original Fender extender likely is beneficial, keeping the wet off her back. Right?

[@SBC-Dualsport]

Thanks for watching! The longer fender will keep less mud/dirt from coming up and on the back of the rider. I haven't noticed a difference in my riding yet as it's been dray here all year.

[@AdrianButler86]

Wonder if that green fender works on the 2021 klx 300.

[@SBC-Dualsport]

Thanks for watching! I'm not sure if it's the same fender or not. I think they are a bit different. Might check the Facebook groups.

[@batukilang5765]

Looks nice and tidy, but can i buy that from Indonesia?

[@SBC-Dualsport]

Thanks for the comment! Yes. I believe you can get it here: thai.webike.net/en/sd/24201443

[@kapture4316]

I can’t find this part in 2024 for a 2023 KLX 230S

[@SBC-Dualsport]

Thanks for the comment! Yeah, they are hit and miss. I think the last person commented on finding them on Amazon or Ebay.

[@kapture4316]

@@SBC-Dualsport update! I did find on eBay! And used your video to walk me through thank you!

[@ItsKeananT]

Were your side mirrors reverse threaded? Trying to order the double take mirrors . . .

[@SBC-Dualsport]

I believe they are. I just ordered the pair and they worked. They also worked on my Honda Monkey so they must be universal.

[@Franzuccato]

Awesome video, mate!!! Great content and super easy to follow. Besides the tail which other mods did you do? Is this seat lower than the stock? How tall are you? I'm 5'4 and I'm keen to buy a klx230 but will probably need to do some adjustments to fit me. Cheers!

[@SBC-Dualsport]

Thanks for watching! I'm 5'7" and have a 29" inseam. I have the lowered seat from SeatConcepts which is the only mod I have done for height. I have bash guards, windshield, Wolfman Luggage bags, OEM rear rack, and mounted a RotoPax 1 gallon fuel can. Overall a great bike for someone my size who doesn't need to be ripping around with my hair on fire.

[@Franzuccato]

@@SBC-Dualsport awesome! Thanks for replying and sharing your experience. Will follow the channel and keep watching your videos. Cheers!

[@AdrianButler86]

@@SBC-Dualsport where can i find the seat? Wonder if it works for my klx 300 2021

[@SBC-Dualsport]

I got mine from seatconcepts.com/collections/kawasaki/products/comfort-low-height . Hope this helps.

[@bravotango_photoworks]

Can you review your jerigen gasoline

[@SBC-Dualsport]

Thanks for the comment. I'd say the Roto Pac can is the best out there. It gets a bit messy when getting the spout out of it, and the setup is quite expensive. I use this on multiple bikes.

[@bravotango_photoworks]

@@SBC-Dualsportthx for your information 🙏🏼

[@tuongqle]

Looks clean! Question though, do you ride in dirt/rain/mud? I tend to keep my fenders on for that reason, wondering if you’ve noticed any more mess without the fender

[@SBC-Dualsport]

Thanks for the comment! Yes, I do ride in the mud and rain and yes I do tend to launch more in the air than usual. Most of my riding is done on dry dirt roads where dust is the major issue. Too many dry days here in California.

[@tuongqle]

@@SBC-Dualsport I’ll be coming from the Bay to the Sacramento area in a few months, so I’ll be riding similar roads as you soon on the same bike. Do you think it’d be difficult to make it from Sacramento to the Sierras on the KLX230?

[@SBC-Dualsport]

@@tuongqle Once you get to Sacramento there are many non-highway roads to get to the mountians. Both on the HWY 50 and I80 side.

[@DocCardy81]

How does that Seat Concepts seat work for you? Did you get the standard or the low height?

[@SBC-Dualsport]

Thanks for watching! I got the lowered seat because I'm 5'7 with a 30" inseam. Its so much more comfortable that the stock seat. I'd imagine the stock size SC seat would be even better.

[@jamiecolthart7882]

Hello I think they have taken this product down I can’t find it anywhere? And the links below didn’t work Any help is much appreciated!

[@SBC-Dualsport]

Hi Jamie! Thanks for watching! I would put this into google and you should find someone who has it in stock "D45-18-516 fender elimination kit" Good luck!

[@jamiecolthart7882]

@@SBC-Dualsport Thank you!

[@mikeashbaugh7773]

Nice job

[@SBC-Dualsport]

Thank you! Cheers!

[@Robert-ty6tf]

Thanks

[@SBC-Dualsport]

Thanks dfor watching!

[@danreynold2337]

where did you actually find or get this kit? been looking for it for long time

[@SBC-Dualsport]

I got mine from www.wheelingcyclesupply.com/ But it seems they don't offer it any more or are out of stock. Good luck finding it!

[@texaspatriot84]

Would anyone know if this would work on same bike but 2023?

[@SBC-Dualsport]

I don't believe the bike has not changed in anyway. Should work! Thanks for watching!

[@texaspatriot84]

@@SBC-Dualsport thanks!!

[@mitchwinder1204]

Very enjoyable. And I don’t even own a 230. 😂

[@SBC-Dualsport]

Thanks!

[@TheRustBucketGarage]

What is the exact make and model of your bike im trying upgrade and build the new supermoto and would like to make sure they stock tails are the same, that'll will tell me if it will work or not. Im sure it will.

[@SBC-Dualsport]

Hey There. It's a 2021 KLX 230.

[@shitoshuco]

Will this fit on a 2021 klx?

[@SBC-Dualsport]

This is a 2021 KLX 230 so you should be good to go!

[@kristianrose910]

Would this kit fit a 2016 KLX 125 ?

[@drew-76]

Now you just need some LED blinkers

[@SBC-Dualsport]

I did end up adding them on after. Thanks for watching!

[@echols2010]

Instead of have eliminator kit why not just make it come stock like this lol

[@SBC-Dualsport]

Agreed. I hate the California/US safety requirements. Can't someone make the stock bike look cool from the start?

[@resiliencycommand]

Looks really good but looks like a lot of work lol

[@jamiecolthart7882]

Thank god! The stock license plate holder is so ugly

[@SBC-Dualsport]

Thanks for watching! Yes, what an improvement!