How To Install Roaring Toyz Lowering Links

This is an installation video for Roaring Toyz 5 Hole Lowering Links. Our 5 hole lowering link allows for 5 different levels of adjustment and this video shows how to correctly install them.
We make these links for Kawasaki Ninja 250, Ninja 300, ZX6R, ZX9R, ZX10R, ZX12R, Suzuki Hayabusa, GSXR 1000 and Yamaha YZF 600.
Check out our lowering links at www.buynowroari...

[@Leo_Dasarath77]

Who is watching this in 2023

[@m5sa5osman53]

2024!

[@elmerluzero3puertastechito501]

I want to raise my bike, what should I buy? I have a honda crf 250 L

[@user-ev7fe5bq9u]

Man can u help me. I have a honda hornet 599 2006. And I can't find any lowering link do some other bikes have different way to lower. ?

[@mattwagers9916]

How much of a drop is the lowest setting?

[@mattwagers9916]

on a 2013 zx6r

[@RoaringToyz]

Matt Wagers Somewhere around 3.5"- 4".

[@Greengulchleaves]

...did I just see a turbo?? I swear I saw a turbo

[@classiqbrandon]

does it come stock with the 300

[@ducatista695]

He pointed to it at the beginning of the video saying something about not needing the fairing off. They were just doing other work.

[@S1000XR]

Who is watching this video in 05/2020>

[@jerryrodriguez4550]

5/2023

[@munirsiraj1451]

6/2023 😂

[@S1000XR]

@@munirsiraj1451 oh my sold it already 😀

[@xHeavensPunisheRx]

Thanks for uploading this video! This is the most informative and instructional video out there. Please do a complete video on how to properly lower the front end in proportion to the lowering links installed. Subbed!

[@Amaturehourwithmike]

First of all; why the blazes is this bike boosted!? Hahaha! Awesome.

[@marchtel01]

Thank You! This gave me the confidence to buy your lowering kit to adjust my bike so my girl can ride it now!

[@vegataxkc]

This is one of the best how to videos for lowering links on the internet. Thanks a lot!

[@supadem]

any peep the turbo??

[@touyang1687]

Roaring Toys, do you drop the front then as well? Could you do a video showing how to lower the front the right way so the geometry and handling isn't messed up? Would love to buy lowering links from you guys but lowering the front seems difficult

[@Pheonix.711]

Can you do a video on chain tightening? This video was so detailed and helpful! That would be SO much appreciated.

[@quackerz312]

is that a turbo on that 300!?!?! what turbo is that? and what upgrades are on the bike for this turbo?

[@zakizidanemoechtar6872]

I think it is

[@johnrobertlee3768]

That would be a water pump...

[@federicocerbonim7654]

the farthest the distance of the holes, the lower the bike but, measure first what you need THEN use the correct hole. Usually the "bone" goes from 120mm to 150mm. My Tiger 900 Rally Pro standard is 100mm, 120 was too low, so I ordered a 110mm , the bike lowered 10mm (1cm) and high was perfect for a flat foot.

[@mauricebruh3228]

You didn't even torque bolts when you were done ..do you have to put lock tite on them when you tighten them up???

[@Namsomnia]

No because they are nylock nuts,,

[@VolodymyrSharayenko]

Greetings!! Thank you so much for this great video. Thanks to it today I successfully to install a lowering kit for Kawasaki Z400 without any issue. All thanks to your detailed tutorial. You saved my day...

[@alcolea125]

Ninja 300 turbo??? LoL! o_O¡¡

[@Jamessawyer010]

Is it possible to increase the height of the ninja 300? I hear that the seating in that bike is very low and that its good for short riders. I kind of prefer a bit higher seating position bikes so I was wondering if there was a way to increase the height of the bike.

[@cleangenJZ]

Tie down the front, Jack it from the bottom to release the load. Is what i have always said

[@flintsmiley9595]

Killer sleve trick Thanks

[@buddissimo]

Thank you, very nice video and clear ! I did mine on my z750

[@ballinb8044]

Am I the only one noticed a very small turbo charger on the 300? On to the reviews lol

[@ronaldaukerman3811]

Looking to lower my Roadstar 3" in rear.Will this kit work?

[@nikkim5061]

Why did the video cut off? I wanted to know how to lower the front end to the correct height too..

[@Zx14rrrrrrrrrrr]

Best video. Straight to the point and went over every little thing.

[@Saykolo]

Does this fit a 2012 yamaha yzf-r6?

[@alexandroleon2958]

Well specified berry good video ...

[@augustoribeiromartins3363]

Não falo inglis mas me ajudou!!! Obrigado

[@davidwaddington9414]

do we really need that background music ?

[@CaptainVelveeta]

Awesome video! Thanks 😎👍

[@billyjones9045]

How many inches can you lower the x-14 before having to change out or mess with the kickstand

[@Bigmoose636]

Would those work on a 2023 zx

[@jimmygarcia303]

Great video, I'm sure the ninja 300 and the ninja 400 are pretty similar, so this gave me an idea of how to go about the job. However, would it be a good/safe idea to use a rear bike mount to do this job?

[@gamergirlx]

Any tips for getting the sleeve out? The screw moves in and out, but the sleeve doesn't seem to want to budge.

[@uncletoy774]

i know im asking this a little late in the game but i just started riding again after a 10 year break. i recently got my hands on a ninja 300 and have been doin some mods on it. so the questions is. IS THAT A TURBO YOU HAVE ON IT?

[@arthurraber3839]

So glad I found this. I'm 16 and only 5 foot, and I want a Honda CBR250 and I'm too, well short. This helps alot. However, does this cause an increase in tension in the rear spring.

[@gallor1able]

Question someone please please help, Can I lower the rear without having to worry about the front? 2015 Hayabusa

[@oliveryasay3395]

hi, does lowering the bike by an inch already affect the handling and side stand of the bike? i want to lower my cbr500r only by an inch, i don't want it too low, i just need 1 inch to be flat footed. does it affect the handling and side stand already? thanks

[@tieweb]

I bought the roaring toys lowering kit. Rear, front and kick stand. Any chance you can do a video on how to lower the front and install kick stand on a ninja 300???

[@estebanfrancisco530]

i have these lowering links, i wanted to raise it a bit more, i lifted it like here in the video with that lift but the links still were not budging, it still felt stuck. Could'nt find a sweet spot. If I hit the long bolt out the other end, will my bike be okay? it wont fall right since the jack is what is holding it up. please answer.

[@Evo_Spec]

Extremely well done video with experienced tips and tricks! Thank you!

[@russcole5685]

Could have replaced to bolts in the opposite direction, meaning, nuts on the other side. Allowing further adjustments easier

[@oliviasolano7159]

For a bajaj pulsar ns 160

[@anthonyisado8176]

hi im looking for a lowering links for my yamaha tt e 600 1997 model ,can you help me find the item please

[@sylvilaguscunicularius3155]

Roaring toyz doesn't have a stock option -- at least I think. I ordered a link with a stock setting, and Roarint toyz's top notch is an inch less than stock.

[@irineoromerojr5897]

I have a 2013 honda cbr600rr do you guys have any lowering links for my bike?

[@ethanpenney7295]

Is this the same process regardless of the type of links including if you wanted to put the stock links back on?

[@roderickcavallo8244]

Interesting video, quick question, do you need to increase the chain free play when a bike is lowered? Thanks

[@busalove2013]

Ninja 300?? Lol! Why not just lower a Vespa scooter...

[@anthonyisado8176]

any idea where i can buy a lowering links for my yamaha tt e 600 1997 model ,thank you

[@tony8512]

Ok if you lowered it to the max what is the seat hieght at from original. Thanks

[@AlexAndreiZAR]

why would you have a turbo on a 300cc bike !?

[@johncobb3548]

Is the r6 and the r1 the same as the bike you are working on? Very good video thankyou.

[@TheSwaney73]

Most informative video of what I was looking for. Thank you

[@steve23464]

Turbo'd 300..Yea we're doing other stuff on this bike.

[@ducatista695]

Do you have a way to correct the swing arm angle after dropping it that much?

[@MARKINAU8]

Will lowering front fork make the clutch cables longer relatively?

[@mercytoday]

One of the best videos I have ever watched on KZbin!

[@antonioriccardi6420]

for ninja 400?

[@blainehouser4354]

Thank You! I’m 5’ 7’ This will be Great!

[@2phalanges]

can you do a lowering video on suzuki dr650. thanks!

[@antreaskourmoulakhs9057]

Simple and right information good job and thanks!

[@mikee5507]

GREAT VIDEO!!!! I CAN NOW BUY THE BIKE I WANT! THANK YOU.

[@juniorivaldo1782]

Zx6r

[@DaveSpen]

Great vid but......can we hear that bike running?! ;) :-D

[@HuyTran-sk3py]

I am sold, this video was executed so well. I am ordering mine right now.

[@tylerlongmore9004]

How much power did it gain after the turbo?

[@donut3110]

"No jacking on the suspension" ROFL got it

[@seventysevencats]

That was very enlightening. I have a lowering kit I want to remove and it seams much easier now.

[@buddissimo]

I lowered about 2 cm what about the fork, 1 cm? Ratio : the half cm than rear ? Thanks

[@ericeric2580]

Me also facing same question.

[@tlagumina]

Very detailed and informative. Thanks for making a complete video with “tips” for making it easy.

[@LongTheGr8t]

will this link work on gsxr 600/750?

[@usmanshouket6729]

Can i lower my r1 2012 the same way? I want lower my bike 1 or 2 inch will it affect the performance and handling of the bike?

[@richwil5281]

will that link work for a 2008 honda 600rr

[@abigailzamora9062]

Great video thanks for sharing.

[@timothybrengel872]

600's be sleeping on a boosted 300😴

[@richardcarlson6444]

Do you make these for the cbr600 f2

[@jackwang531]

Any need to adjust the fork tubes ?

[@izzyonthebeatboii2599]

At the lowest, how man mm can you cut

[@nabilblack]

Hi, Can be this done with cbr1000rr?

[@jjrock5]

Good video

[@RoaringToyz]

jjrock5 Thank you! We hope it was informative and useful.

[@antdx316]

+Roaring Toyz, If people aren't too too short imo people should regret lowering their bike once the bike is moving. Stopping is 10% and 90% is riding. Lowering the bike makes it worse I assume. When leaning you want suspension travel when you hit something because when you bottom out leaning the bike can go down. I like the comfort knowing I can lean w/ confidence because I didn't lower the bike. I'm 5'275 and like 5'375 with the shoes. I can tippy toe both sides with like half an inch in the air on a stock '05 R6. I can flat foot on one side which means I'm covering the rear brake uphill. I just get off the bike and roll it with 2 feet on one side. There is no need to 2 feet backup while on the bike.

[@williambright828]

Will this fit 2017 Yamaha r6 ?

[@vkhiev]

Thanks for most detailed

[@vyk9815]

Is use full for Yamaha fz bike

[@colin9630]

Why lower it? Doesn't this mess up the bike's geometry?

[@kevinkev1530]

For short people or drag races

[@antiiv11]

Will it work in an 2015 R3

[@JSway-fp4mj]

Awesome video! Thanks.

[@lsync3707]

Can we do it for yamaha r6 ?

[@Homehous]

Finally the right way to do it

[@waz00z]

how many inches is each setting?

[@traigarcia7821]

1-5 inches between.

[@waz00z]

Im guessing its between 0.5 - 2 inches

[@SGK23TV]

2020 ninja??

[@oxbodydouble3428]

Great help 👍 👌.

[@austinallen592]

Is that a turbo I spy

[@soulassassin2424]

How much does lowering a sportsbike really affect its handling?

[@Ouqs]

i have my 2015 zx6r lowered with this company links. it makes your takeoff a little unstable. like the handle bars sway :[ almost like a speed wobble. also its had to ride with a passenger on the back.

[@Ouqs]

this is how i bought it... changing it back to stock

[@randymcvay308]

very helpful. thank you

[@MrGtcrx]

BOOST !!!!!!!

[@kevinkev1530]

Thx

[@happytrailz]

I SEE A TURBO !!!!!!!!!! good vid btw

[@TehKneegrowplease]

Happy Trails haha I thought that’s what that is. Interesting to put on a 300

[@SGK23TV]

400