You should definitely roll out your rubber and let it sit for at least 24 hours before installing, gluing only the seams will allow bubbles to form in the center of the rolls and you should NEVER USE THE WRONG GLUE the glue I would recommend is E-Grip iii or Colossal HMA117 epoxy the E-Grip iii is the best glue for the flooring I would recommend putting a space heater on the glue several days before installing to allow the spreading of the glue to be easier to work with and you should also roll your floor with a 100Lb roller after installing and you should never use duck tape use green frog tape or yellow scotch tape blue paint tape won’t work and only use rubbing alcohol to clean the glue other cleaners like goof off or mineral spirits will fade the area that is clean
@CNTEKINNOVATIONS2 жыл бұрын
they didn't even use the roller lol
@Timberjo2 Жыл бұрын
I would love to see how you would set up a floor transition from the rubber flooring to carpet. I plant to put the rubber flooring in my basement DIY.
@nickkoinoglou63334 жыл бұрын
Is there any special procedure that needs to be done if it is laid on a cement basement floor
@F.Razor7183 жыл бұрын
😂😂😂
@mike26144 жыл бұрын
Good info! What if you're installing it over a carpet how can you keep them together without adhesive?
@peterhennig46783 жыл бұрын
🤣🤣🤣 Don't be lazy, rip out the carpet
@joetheprooo3 жыл бұрын
Ya can’t
@PayDray3 жыл бұрын
Use carpet tape
@1TTHIEL Жыл бұрын
Do you ever caulk the joints with calk that would match?
@dfy11 ай бұрын
Hey, thanks for the video, what kind of glue do you use?
@vicjagsingh Жыл бұрын
Can I put this in my basement without glueing it down? I have vinyl on the floor right now.. My basement is a space for the kids to play. But I have a treadmill bicycle and a few other light workout stuff. Will it work without glue?
@JoeyRam. Жыл бұрын
So for a one man working on it, you recommend rubber tiles over the roll?
@lighto9994 жыл бұрын
what adhesive are you using? thx!
@BrisketLip5 ай бұрын
Same question from me!
@wildkev1010 Жыл бұрын
I am a quality control manager at a rubber flooring manufacturing facility. I'm curious, if any, what would be your biggest gripe when it comes to quality issues with the rubber flooring?
@michaelbubenko Жыл бұрын
The factory ends not being square
@s.l.5593 жыл бұрын
question i have rubber speck gym tiles as well as rolled rubber gym flooring- id like to install it (myself) for my 'dog room', laundry room, the hall & bathroom - my question(s) is this a good idea?! is there a way to 'water proof' it ? of course because i dont want moister to build up in between the edges & which would be easier to accomplish this? (tiles or rolls) thank you
@roblesarnaldo5768 Жыл бұрын
Hi there! Thank you for making this video. Im about to do a DIY. 2 questions. 1. What was the glue used in the video? 2. Have you ever had problems with floor scrubber machines pulling the mat off?
@BrisketLip5 ай бұрын
This question is all over the comments. No answer though
@Buenoemer2 ай бұрын
Roberts adhesive 3000, I took a screenshot and then research with Google lens 😂, I don't know why they don't show it clearly 😅
@rahimi420fr Жыл бұрын
Great job how you do the door seam
@curtisparry31467 ай бұрын
If the customer wants to remove the rubber flooring product how difficult is it to scrape off the glue from the cement subfloor? Do you ever use double sided tape the hold the rubber floor in place?
@anthonytsakonas493 Жыл бұрын
I just did a job and had to run the rubber floor along a metal schluter . There are small gaps after cutting the rubber. What do you suggest to cover up those small gaps?
@DanielRodriguez-vz5bk2 ай бұрын
no need to let the flue dry? before installing?
@JavierLopez-n6c5 ай бұрын
I have glue over my rubber mat, what kind of glue remover need to use?
@bobbenbrown1234 жыл бұрын
I want to install on concrete surface. What do I do or use? Rubber tile mats? Gym/ horse mats? What kind of adhesive glued down would I use?
@yn98619 ай бұрын
An this be used under laminate flooring for underfoot comfort?
@NewbanksGirls6 ай бұрын
No, you need to buy underlayment specifically for laminate, this is way too thick
@mrpoopoohead7668 Жыл бұрын
the walmart here just did a remodel and installed what I think appears to be this type of flooring in the entrance vestibules, and this looks like something that you could use to do disc golf tee-pads with???
@jessethomas96762 жыл бұрын
I did a 600ft job in a hospital weight room. Glue squirts out a bunch of the seams, I wipe the glue with the recommended cleaner and a rag. It smears into the pores of the rubber and it’s impossible to get out now. So there’s streaks near the seams of glue embedded in the rubber and the customer is complaining, might have to eat the job but how do I prevent this from happening again? It seems inevitable that some glue will get onto the surface, and if it gets into the pores then the floor is ruined
@Lìven-good2 жыл бұрын
So the product we use in commercial gyms must be in rolled out and let rest 48 hours a 50 ft roll often loses or gains several inches
@richinkfiendart11533 жыл бұрын
Great video. What is the best glue for that? And how do you deal with all the curls when you lay it down? In the seams I have alot of curls. The flooring also got wet, I wonder if that's the reason why mines is curled. Any suggestions on how to remedy that?
@jadeynwiles72042 жыл бұрын
Egrip 3. And ur supposed to let ur rubber lay flat for 24 hours so it can accumulate and relax, stack multiple rolls of rubber on each other but make sure the edges are lined up with eachother.
@BrionnaRose6 ай бұрын
How much would you charge to do a 20 x 20 garage?
@girlfitworkoutstudio5664 жыл бұрын
Is there a sealant or something that you can't put on top to prevent all the footprints??
@TheYyam85ahaz3 жыл бұрын
What size did you guys install in the video ? 5mm? 8mm?
@AdrienBCaldwell3 жыл бұрын
Thanks for this video. Can you recommend the appropriate paper or plastic barrier to place underneath my stall mats? I have new porcelain floor tiles on the floor and want to lay rubber stall mats on top. I want to avoid the tiles discoloring and protect along the seams where dirt and sand will fall between that could permanently mar or stain the tiles.
@jadeynwiles72042 жыл бұрын
Well. Ima tell you from a installers point of view (me) that glue will not stick to tile. U will have to demo the tile, scrape the floor smooth and install the rubber
@VTNedster4 жыл бұрын
Could you please provide a link to buy recommended rolled rubber flooring? Thanks!
@CarpetExpertBlueprint4 жыл бұрын
Not sure where you’re based but I have a local distributor in Cleveland that I get it from. Aside from that amazon has several listings to scout deals on this product
@relyantsolutions99833 ай бұрын
Can I put it on carpet?
@joelmccoy19893 жыл бұрын
I rent so I can't glue anything to the floor. Is there an option that doesn't require gluing that I can do myself?
@ghostfive71192 жыл бұрын
Interlocking foam mats
@moisesramireztrujillo78762 жыл бұрын
¿Wich one glue do you use ?
@mrmister33623 жыл бұрын
Can we use rubber flooring for cardio section?
@threecturner3544 жыл бұрын
How do you know how many rolls you need that's my issue? Not sure how to measure the floor looks like from watching the video for my small space one roll
@michaeldinnocenzo44523 жыл бұрын
How big are those pieces and what product is the mats
@Nrsesand1 Жыл бұрын
How do you seal a rubber floor?
@threecturner3544 жыл бұрын
For your home do you have to glue?
@josefonseca5155 Жыл бұрын
Where is your business located? Do you know someone in Florida, Palm Beach county tgat can help me with a project? About a 1000sf
@nanzNethan5 жыл бұрын
What glue is that?
@tedcardigan63734 жыл бұрын
E-money23 D. From the video, it looks like this from HomeDepot www.homedepot.com/p/Roberts-4-Gal-Multi-Purpose-Carpet-and-Sheet-Vinyl-Adhesive-3000-4/100159755
@chuiisenseii5885 Жыл бұрын
So how much do u charge per sq ft now ?
@normacastro2483 жыл бұрын
What happens if you use double sided tape instead of the glue
@jadeynwiles72042 жыл бұрын
You gotta use glue.
@sfbnnncmv2 жыл бұрын
"Your ready to rock" T-shirts Merch coming soon 👍🏼
@WanderinWizard5 жыл бұрын
What if your installing on carpet?
@ReaperOfPuppets4 жыл бұрын
So not install over carpet, rip it out first.
@renogonzalez66743 жыл бұрын
How can I order that from you
@rayonclennon64884 жыл бұрын
How does it work in a basement with moisture issues?
@ReaperOfPuppets4 жыл бұрын
run dehumidifiers
@weswarren59873 жыл бұрын
Clicked the like,, great video
@jessicalopez37284 жыл бұрын
What thickness is that rubber floor?? What’s a good price estimate price for around 1400sq ft??
@yovanbungaroo47274 жыл бұрын
Have you ever applied paint on rubber flooring?
@CarpetExpertBlueprint4 жыл бұрын
Not yet
@zackc064 жыл бұрын
Do you know anybody that does this in orlando?
@وليدالجنزوري-و4ف3 ай бұрын
مانوع اللاصقة لتثبيت
@rome34894 жыл бұрын
Did you guys leave any expansion gaps on the installation?
@coachromigill4 жыл бұрын
Great video. Thanks for in-depth explanation
@duaneandrewblack62693 жыл бұрын
Thanks for the information! I am going to help a friend install a portable sauna and she wants to put this on the cement floor which makes sense to me. Thanks again. I'm looking forward to seeing how this project turns out. 👍🏽👌🏽💪🏽
@trik2o4 жыл бұрын
You ever heard of shoe covers?
@TheYyam85ahaz3 жыл бұрын
What’s a shoe cover gonna do for you when your walking on dusty concrete.. common sense
@PayDray3 жыл бұрын
We do this all over Los Ángeles california !!!
@robertwinston52084 жыл бұрын
Thanks bro
@leesolizАй бұрын
Cleaning
@MichaelStager-f5d Жыл бұрын
No acclimation, no allowing the floor to relax, you are fighting it the entire way. Not to mention way too much glue in the seams ( you shouldn't have squeeze out ) Chalk lines are you friend as well as laying it out before you glue. You can literally lay the entire floor and then glue it down after you do a soft install. I'd be curious how many times you've had to return to jobs for quality control issues. Looks like you are fighting it the whole time.
@Rj-nh1df2 жыл бұрын
Best flooring for a garage..second is epoxy
@johnsteier35355 жыл бұрын
“ And when you’re done back the truck up to the bank!“
@CarpetExpertBlueprint5 жыл бұрын
John Steier yessir! Gotta attempt to keep that money growing!
@rld58443 жыл бұрын
@@CarpetExpertBlueprint You are going to have a hard time keeping the money growing, cutting throats at $1.00 ft. Are you a professional flooring installer? If so, have some self respect and charge accordingly. Twenty years from now when you can barely get out of bed because you have physically beaten yourself installing floors, you'll thank me. No 401k or any retirement funds going around doing jobs on the cheap.
@caitlynfritz4564 жыл бұрын
I’m thinking about putting this in my basement, I’m a clean freak, so my question, is how easy is it to, clean? Mopping, wiping? Do it scuff easily? Hep please!!! Lol thank you!! 😊☺️🥰
@gm083514 жыл бұрын
vacuum and mop, good as new
@ricegods4 жыл бұрын
This guy sounds like wings of redemption
@franciscochavez72963 жыл бұрын
Alls u did was stick it to the floor and cut it hahaha every one should Do it theirselves easy work
@Bill-vr3rm3 жыл бұрын
You dont know what you are doing
@stevendoran8774 жыл бұрын
What a hack! Multi-Purpose adhesive? This will not last and you know it. How do you sleep at night
@rld58443 жыл бұрын
That's why he is only charging $1.00 ft. Your typical butcher. Half assing, cutting whatever corners he can. Making sure to keep the prices beat down for the rest of us.
@ge27193 жыл бұрын
Yeah this instal was garbage. Only glued the seems, so first time it gets hot the middle of the rolls expands and bubble up. Just scraping the glue coming up in the seems so that will probably be noticeable when it dries. Not rollered flat so the joins look uneven. And had the balls to say he should charge more. Sounds like the guy who charged my parents £10 per bag of sand, that he didn't even level when laying their astro turf. A bad job ends up costing you more when you have to tear it up and do it properly.