How To Install TAC Running Boards [Step By Step Installation Guide]

Welcome back everyone! Today I will show you how to install Tac running boards while keeping the original look all at about half the price of OEM. Installed on a 2019 Honda Pilot. These Tac running boards go really well with your vehicle.
5.5 inches wide corrugated rubber step pad covers the entire running board with polished stainless steel edge, upgrade your SUV to a luxurious appearance. Providing a secure, slip-proof, comfortable step for the whole family.
TAC running boards are made of aircraft grade extruded aluminum frame with marine-grade T304 edge trim; Offer the best in corrosion protection, durability, and strength.
Subscribe for more: / @autosensation
Do you like other styles?
Comment below let me know and I'll see if I can do a video on it.
Tools needed:
Socket and wrench 10mm and 8mm
Install time:
About 30 mins - 1 hour
Difficulty level:
Easy
Affiliated Product links:
👉Tac ViewPoint Running Boards
Amazon: amzn.to/3wWwJdE
Ebay: ebay.us/xGzJ8O
👉WeatherTech Custom Mud Flaps
Amazon: amzn.to/3uKqg4y
Ebay: ebay.us/bWWjZA
👉Car Underglow Lights
Amazon: amzn.to/3uKOawK
Ebay: ebay.us/dpMeZG
👉Auxito Automotive LED Lighting - auxito.com/?re...
Auxito Copon Code 15%OFF Use AUTOSENSATION
👉Akeeyo Dashcam - www.akeeyo.com...
🏪🚨Our Amazon StoreFront (Most of the products we use in our videos)🏪🚨
www.amazon.com...
👕👗Our Merch👕👗
www.redbubble.c...
Disclaimer: I did most of the labor. My son just wanted to be in the video with me.
Check out more videos!
My latest video: • Latest Videos | Auto S...
Most Popular Video: • Most Popular | Auto Se...
Subscribe for more: / @autosensation
Don't forget to like and subscribe so you don't miss out on our future videos. The more subscribers we get the better and more content on other vehicles we can continue creating. Subscribe. Subscribe. Subscribe.
Disclaimer: This channel is created for informational and entertainment purpose. I am not a mechanic or an electrical mechanic. Auto Sensation or myself will not be held responsible for any damages, injuries, losses or liabilities associated with anything you did to your vehicle/property whatsoever. Please follow your manufacturers guidelines and information in this channel is at your own risk. Note: Some of the links provided are affiliate links in which I may earn a small commision if products are purchased through those links at not additional cost to you. Thank for supporting our channel.
Music Credit
Sunbathers by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
#autosensation

[@AutoSensation]

👉Tac ViewPoint Running Boards Amazon: amzn.to/3wWwJdE

[@seymourbutz8694]

Nothing like putting the pressure on this 52 yr old to see if I can be as slick as the 5 yr old… 😅 thanks for posting

[@rowca76]

Like it! Great how your son helped you. The beginning of a father-son bonding element that will last a lifetime. Well done.

[@totalannihilation9065]

I think it's amazing that you're teaching your boy how to work on your car. My old man used to ask me to help him with his cars and that inspired me to do my own work on my cars and save big money. Amazing tutorial. They look great.

[@AutoSensation]

He loves helping out when he can

[@69BTony]

Bull Butter, that kid is a ringer, a seasoned mechanic.

[@polarisgm]

Great video! Mine will be here in a couple days and this makes it look easy. Thanks for the vid and keep up the tooling with the little guy!

[@RedDragon8888888]

Good informative video! I doubted myself, wasn’t sure if I could do it. After watching your video, it really helped me with my confidence! Thank you, keep up the good work!

[@mini_worx]

Great looking running boards. Thanks for the video.

[@AutoSensation]

Thanks

[@tommyc7597]

Just got my installed today very easy and whole align perfect without any problem great buy.

[@AutoSensation]

Nice. 👍

[@donroyal750]

Eye protection!!

[@randolfchua4880]

Nice video! QUESTION - so were you able to install the weathertech mud flaps/guards? Any reason you didn’t go with OEM parts?

[@AutoSensation]

Didn't do a video on it yet. Coming soon. I went with weathertech because they are bigger few inches longer than the OEM ones and goes with the lines of the vehicle.

[@twotoned2774]

Great video reference. I'm installing mine today. Is Isaac available to give me a hand?? 😁

[@AutoSensation]

Sure. Child labor ain't cheap though (joking). Glad this video was helpful. Don't forget to subscribe for more content. 😉

[@The1Karking]

Good job

[@christianc5161]

Hahaha! This reminds me of my son. Nice!

[@AutoSensation]

Gotta teach them young

[@christianc5161]

Yes, that’s right! I’m waiting for my TAC today. See how I go. I got a 2022 SE. Thanks for the video!

[@AutoSensation]

That will look nice. 👌

[@dogzkage]

Where can I find that crome stripping thats right near the bottom of the car door?

[@briankadams66]

My brackets don't have anything marked on them, do I just assume they are all the same or take a WAG?

[@AutoSensation]

Depending on the make and model of the vehicle. You should have a total of six brackets. Three would be identical to the other. Front, center and rear. You should be able to figure out which are the front, center and rear by aligning the holes to the frame of the car. Does not matter left or right. Let me know if that makes any sense.

[@briankadams66]

@@AutoSensation Thanks, managed to figure it out and got them on the truck this afternoon!

[@AutoSensation]

@@briankadams66 Nice. Glad it worked out.

[@tommyc7597]

Does the TAC running rust after couple months of used and is the black rubber on top slippery thanks.

[@AutoSensation]

Got mine late last year 2020. Went through snow and road salt during our winter storms. This year April and May went through sand and salt water. Up to this point no rust and still good as new. Not too slippery. Mine got slippery when I added some shine dressing (meguiars). Not doing that again.

[@tommyc7597]

Do you have any problem when installing the running board because alot of people complaints that the hole won't align to the car hole on the back so you need to drill the bracket to make it bigger in order to fit thanks. Is the top layer plastic or rubber.

[@AutoSensation]

No problems at all. Hole aligns perfectly. I only had to scrape off a little silicone putty on the under body for one bracket but very minor. Scraped off with a screw driver.

[@tommyc7597]

No, I try to buy it this week but not sure if the hole align perfect and don't have tool to drill the hole bigger if don't fit for my 2021 pilot thanks

[@AutoSensation]

@@tommyc7597 buy from Amazon. amzn.to/3wWwJdE returnable if needed but you should have no problems.

[@res000007]

do you think this is fit to 2021 honda pilot se

[@AutoSensation]

Yes they will. Here is the link. amzn.to/3wWwJdE

[@billymontoya4893]

Do you have running boards for 2016 honda odyssey?

[@jojojojo-ut1wr]

Are they paintable.. it says the weight limit is 200 lbs

[@AutoSensation]

I don't think they are paintable. You might be right. I forget where I saw the weight capacity.

[@AJCoReTV]

Wish it was all black, no chrome

[@AutoSensation]

I agree

[@tenzinsonam3811]

What are the tools needed?

[@AutoSensation]

See description below the video. Socket and wrench 10mm and 8mm

[@tenzinsonam3811]

Thanks

[@edsonrodrigues4629]

hello do you have facebook wanted to ask you something about honda pilet accessories

[@AutoSensation]

Yes. Look me up Greg Nafrada

[@Mirror1973]

Is this child labor😂

[@AutoSensation]

Child labor / child in training same thing. 😆

[@AutoSensation]

More content here. bit.ly/3rmhnvL