How to install the Cybex Cloud Z i-Size & Base Z in your car - Baby Lady

Please note - we recommend checking before purchasing that the Cybex Cloud Z & Base Z is compatible with your make and model of car.
Buy it here: www.babylady.co.uk/product/cy...
Want to see more? Subscribe to our channel and don't forget to click the bell icon to get notified about all of our latest videos!
Shop with us at www.babylady.co.uk
Instagram: / babylady_uk
Facebook: / babylady1991
Thank you for watching today!

[@oijimmyslay]

One pointer I’ve got from installing this car seat - utilising this excellent video - and that I can’t see in the comments so far - is that the car seat will only clip in to the base when it is side or rear facing. My base plate was spun to be front facing - and the seat wouldn’t clip in at all. I totally understand that this is a safety feature so that the baby travels facing the correct way - but also it was worrying when I was just testing out just shortly prior to his arrival - and thought I was going to have to buy a whole new travel system 😂 Hope this helps anyone else currently swearing at their seat to “JUST ***** CLIP IN!” ❤

[@jonihyyrylainen1186]

Thanks Baby Lady! We just got this setup as our first carseat and base. I couldn’t find any information on any official Cybex site conserning the wiggle and light movement of the base/seat when installed in the car. Seeing this video made me a bit more assured of the safety. We do get all three green signs.

[@daveormie91]

I'm here watching the video for this exact reason. I have just bought and tested for our baby in 3 weeks. It definitely didn't feel right but this has confirmed the slight movement is fine!

[@margauxj-broussel9186]

@@daveormie91 Please read my comment in the main section. Too much play of movement is not good. If is doesn’t feel right, it is not right.

[@congzhang3437]

To unstuck it: Our was stuck to the base and if you look under the handle there's a small spring and a mechanism to pull a small cable that frees the seat. I manage to pull back the small cable with the hammer head within the grip of the handle and it unstuck it. It's really hard to get there so I used floss to get and pull the cable by the hammer head. Hope this helps.

[@LamNguyen-zs8gt]

so touching for an excellent video

[@jonnym1409]

Really helpful - particularly on the fact it wiggles which was worrying me!

[@Kg14758]

Very helpful, thank you. Please can you do one on the instillation of maxi cosi family fix base 3 and pebble pro?

[@BabyLadyUK1991]

We will upload one this later today we are glad you found it helpful

[@Kg14758]

@@BabyLadyUK1991 thank you so much that would be great.

[@BabyLadyUK1991]

@@Kg14758 This video is now live on our channel :)

[@crows671]

Thanks!

[@itsdanielleslife]

Do you not put the handle down the back? Like as a bumper against the backseat?

[@paulc8414]

Middle light is confirming the leg is seated correctly

[@misswhite472]

Thanks, really helpful! 😊 Should the car seat handle be up or down when travelling? Saw something about which way was safest but now don’t know which one it was!

[@BabyLadyUK1991]

The car seat handle should be in the upright position when installed in the car :)

[@gfw5106]

Is it ok if the back of the seat is lightly resting up against the seat in front (not being braced)? Thanks

[@BabyLadyUK1991]

The advice from Cybex is that nothing should be touching the seat, whether this is the vehicle front seat or the car door

[@eakokel]

Hi baby lady, I have this exact cybex set up, what can we do to stop babys head falling forward when sleeping? She will be 6 months next week, thanks.

[@BabyLadyUK1991]

Thanks for your comment. This is something that naturally happens. As she gets older it will stop. Although it looks disturbing, if the child is uncomfortable they will move. If you are very concerned, we would suggest going back to your retailer, for them to take a look.

[@margauxj-broussel9186]

Thanks. However the base definitely need to be closer to the back of the seat. Maybe it was just for the purpose of the video because the is too much gap here and far too much wiggle. The back plate you mention is what prevents the base and therefore the seat to bounce up in the event of an accident. It is the opposite of the leg which prevents the base and seat to dive. It needs to be at least one more notch closer. Best way to do it is to move the base side way left-right and it will automatically click one more notch on each side and be perfectly secure. No risk to intent your seat as the area is wide, all the more if you have a seat cover.

[@BabyLadyUK1991]

Thank you for your comments. In the car we use the base is up against the back at the bottom and can't be moved closer at the top due to the shape of the car seat.

[@andybrown3715]

I have to say this video lacks a bit of detail . When you put the rear forks in to latch onto the rods in the seat, you have to check there is a Green indicator on both sides, then I would Rock it back an forth across the seat and that would "Rachet" it in nice an tight, then put the front leg down till its tight. I would have it so tight you move the whole car rather than have any movement in the seat alone.

[@jo12pose56]

How do I get the seat out? Can't find Information anywhere... very annoying

[@rongeez4278]

Character In the video It's great, I like it a lot $$

[@HouseOfAnnie]

I thought that the base had to be flush to the seat? The leg looks way too extended so the base is pushed upwards and so the babies head more like to fall forward, had this issue with my own base Z.

[@BabyLadyUK1991]

The camera angle makes it appear that way. We made sure that it is flush to the seat. :)

[@afterace]

Hello. I have installed the base but the middle light which indicates the leg is set properly is lit only partially green, and does not beep. If I set the leg under any other angle, it starts to beep and the light turns red. In my wife's car I have the same base and there the middle light is fully green. What am I missing here?

[@BabyLadyUK1991]

We would always recommend going back to your retailer if you have any issues

[@laforgeelias4692]

Is it possible to extend the seat with the back handle when the seat is installed in the car ?

[@BabyLadyUK1991]

The car seat cannot be extended when it is installed in the car.

[@Rokcwell]

Actually there are two isofix indicators located on the side of the base, where you extend the "claws". The indicators in front of the base are for 1. Rotating plate 2. Leg of the base and 3. The actual seat locking mechanism.

[@Jstephens92]

The light for the car seat to clip in won’t turn Green despite trying all sorts. Any ideas? It’s brand new and did turn Green when I tried it out the box but now it’s in the car it just won’t go green

[@BabyLadyUK1991]

It sounds like you have a fault. we woud recommend going back to your retailer and gettting them to replace it if its new

[@dagsdags2362]

How to stop beeping a base ? when I deinstalled it and put in car boot it’s all the time beeping .

[@gbenedetto]

I have the same problem... Drives me nuts..

[@paulc8414]

When the leg is condensed down, make sure to pull it back out about an inch, until it clicks, then when it's folded up, and pressure is put on the bottom it'll stop

[@margauxj-broussel9186]

@@paulc8414 Could you please elaborate? I couldn’t find that. The leg is not even locking in the “storage” position, banging my own legs while I transport the base. What a stupid design. Did any of the Cybex designers travel at all with their children of they just install the base once. When. it in use the leg can’t stay in place and is constantly blipping. I am wondering how to do in an airport. A tie down strap could be a solution but so disappointing for such a pricey setup.

[@manishsethi01]

Do you need to use a seat belt at all if you have a base?

[@BabyLadyUK1991]

If you have the base then no you don't use the seat belt.

[@maxisham4724]

can this be installed without isofix, just with the seatbelt, as older cybex bases can?

[@BabyLadyUK1991]

Yes the Cloud Z can be seat belted in. We have a video of how to do this on our channel as well.

[@maxisham4724]

@@BabyLadyUK1991 thanks, is that the base or just the seat?

[@BabyLadyUK1991]

@@maxisham4724 You can't fit the Z base with a seat belt. Its needs to be installed with isofix. The Cloud z can be installed with a seat belt. There is a video of this let me know if you need the link

[@db6342]

the base fits fine and I have 2 green indicators showing it secure BUT it continues to beep !?

[@BabyLadyUK1991]

Check if the base is touching the floor and fully extended, if its still beeping you might need to report to your retailer.

[@db6342]

@@BabyLadyUK1991 Many thanks for the prompt response. Much appreciated

[@cuthbertgrichardsfuck7235]

How do you take it back out?

[@films_by_jo]

That's what I'm trying to find out too!

[@tuffbadger7342]

Yes top of the leg there is a grey button pull it up seat comes off

[@RT-ib1on]

Me too lol

[@cog4261]

How come your base isn’t beeping?

[@GoodHabitsHappyMind]

Can do one help me please I can’t find any video 😢about beeping I have all 3 green lights and it’s still beeping 😔

[@BabyLadyUK1991]

The Beeping is normally from the leg not touching the floor but if the lights are all green and your leg touches the floor firmly your base maybe faulty. I suggest contacting your original retailer for more help.

[@GoodHabitsHappyMind]

@@BabyLadyUK1991 thank you ☺️

[@lilympullen]

Does the base need to be flat on the seat? The isofix base we have for this is non stop beeping/doesn’t go green unless we extend the leg fully but this pushes the seat up so it’s at an angle but this doesn’t seem right?

[@BabyLadyUK1991]

The majority of the base should be touching the vehicle seat, however a slight raise is safe. If you are in any doubt, please do contact your stockist with photos of the fitted base who should be able to assist you more :)

[@nguyenthilan2517]

how did you do it can you share with me , thank you

[@whathappendnext5887]

How do you lower the leg

[@BabyLadyUK1991]

On the front of the leg, there is a grey button which when pressed, will extend the leg :)

[@ggregor123]

Yeah but how do you remove it now?

[@BabyLadyUK1991]

Hi, thanks for your comment. We will do a video on this for you. :)

[@ggregor123]

@@BabyLadyUK1991 that fantastic. Thank you. I was very stressed trying to figure it out at the time 😂😂😂 Any help will be great.

[@g.georgiev1952]

How to remove the cloud ?

[@BabyLadyUK1991]

There is a grey button at the front of the ISOfiz base which when lifted up, will release the car seat from the base x

[@littleman787]

@@BabyLadyUK1991 really needed this in the video itself

[@Dragon-Slay3r]

Z head? E behind it

[@VVaniLia]

Why lights on my base don't flash? 🤔

[@BabyLadyUK1991]

Hi Emila, so sorry to hear this. We would recommend that you report this to your retailer and they will be able to help you.

[@chrisledsom9059]

Can’t get the seat out need a video

[@BabyLadyUK1991]

There is a grey button at the front of the isofix base which, when lifted up, will release the car seat from the base. Hope this helps. :)

[@georget30000]

Be helpful it you at the end showed you removing the seat.

[@ourbest3224]

Why the baby can t look to the front of the car but only can look backwards

[@BabyLadyUK1991]

It is the law that this group of car seats can only be rearward facing.

[@nayshasteel3441]

Memerlukan lebih ramai orang jadi sebarkan video ini lebih banyak

[@danielstocker5703]

Sorry, but its Not 100% true. When you install the base you habe to Push the base to the seat an then you have no „whobble“. You must hear the Sound from the Metall. „Tack Tack Tack“…