How to Install the Leo Vince GP Corsa EVO slip-on Exhaust on a Z400 or Ninja 400 + Unboxing

[@Z900JerseyJared]

Hit me up with any questions you have about installing the exhaust

[@aaliyahmartinez8522]

I noticed a leak after installing the exhaust on the z400

[@Z900JerseyJared]

@@aaliyahmartinez8522 are you saying that you received a bad exhaust from LeoVince or are you saying that you messed up the installation? Is there anything that needs tightening?

[@aaliyahmartinez8522]

@@Z900JerseyJared Probably bad exhaust since i followed your video but i ask around and they all said it’s normal, it’s more of water drops coming out.

[@Z900JerseyJared]

@@aaliyahmartinez8522 Yeah this is totally normal -- "Water is a product of combustion. When the exhaust system is cold it will condense. After it heats up it goes away. This will be more severe when the humidity is high and the weather cold." Hope this helps to set your mind at ease. (Also it feels good knowing that my video is helping people so thank you for that!)

[@aaliyahmartinez8522]

@@Z900JerseyJared yes thank you, puts my mind more at ease. also thanks for the video help a lot !!

[@powamoto]

You guys do your own work? That’s so important! Great job showing the steps and proper tools!

[@powamoto]

@@Z900JerseyJared wow well I’m gonna keep on watching cuz if that was your first I’m impressed can’t wait for the upcoming how to vids bro! And thanks again for supporting me on #powamoto

[@youngbutkickinitlike70s84]

Yessir, thank you for the vid keep up the content, having fun a lot of fun on her. Wishing You and any riders a good and safe time riding !

[@amzad7071]

“Man that exhaust is loud just like the ones I hear on #Powamoto we sending much love to your channel. Send love back we waiting”

[@youngbutkickinitlike70s84]

9:10 She looks a lot better with new slip on, I don’t have any tune places around me but should I do I tune after installing? I know I asked this before but I want to make sure

[@TomBumann-pe2wt]

Are you using the oem graphite bushing were the mid pipe joins the pipe?

[@Z900JerseyJared]

I didn't use any bushing and haven't had any issues, but I did just find this great write up of someone who did: "Yeah you mean the spacer? If you have the clamps loose you can fit it inside exhaust end that goes to the bike. and you should be able to wiggle and slide it in until it's snug. Then just tighten the clamps. It's a tight fit so I had my wife hold one end then I kind of twisted and wiggled it till it was on all the way. That way I didn't have to worry about like bending the exhaust coming off the bike or anything trying to put the slip-on, on."

[@c0uchsl0uch]

Would you say the GP Corsa slip-on is loud enough that you need ear plugs when you're riding it while wearing a helmet

[@Jcosh84]

I have the same exhaust and love it. If I keep the DB killer out, the inside of my helmet is a torture chamber LOL I might have sensitive ears, but I rock plugs all the time.

[@c0uchsl0uch]

@@Z900JerseyJared thanks

[@ZaidKidwai-m4o]

Hey man, I know you recorded this a while ago and might not remember. If I did want to install the DB lower/silencer, when would that be done?

[@Z900JerseyJared]

@ZaidKidwai-m4o it's been a while but I think I did that at the very end and needed a rubber mallet to get it into place. Good luck man!

[@JarrodEzell]

dang bro are you doing this outside under the moonlight

[@Z900JerseyJared]

Hell yeah I'm always gettin busy under the moonlight

[@TuffTgr]

DECIDING BETWEEN GP CORSA OR LV 10 .... WHICH ONE IS BETTER?

[@Z900JerseyJared]

Hey Tuff Tiger, thanks for watching and for your great question. From what I've seen the 2 slip-ons are pretty much the same performance-wise. I think it's gonna be all about the look that you prefer -- shorty or a bit longer? At the time that I bought my Corsa, I wasn't that into the shorty exhausts, but if I were to buy one today, I'd probably get the LV 10. It sounds a little better in my opinion and is also slightly louder. You can't go wrong either way though! And thankfully you'll finally be rid of that huge ugly (and heavier) stock pipe. Let me know which one you end up choosing.

[@TuffTgr]

Thanks for the reply. I am leaning more towards lv 10 carbon … I don’t mind the look of it but I hear people saying it’s tooo loud.

[@polo_lmao]

can anyone tell me first hand if this exhaust sounds anymore different than the LV-10? I can't really tell from the video

[@MarquisDeSang]

ny guess is that it is a little quieter because it is longer. But it may sound better because more room for porn frequencies.

[@zahnyto709]

The GP corsa is quieter yes.. its almost the same tone but when you rev it the sound is clear and in my opinion its just perfect!

[@masoncollins6884]

I have the same one, but I want to put the db killer how do I install it ?

[@Z900JerseyJared]

I just ran out to the garage to take a quick look at it and it doesn't seem too bad. I think I just lined the holes up and shoved the baffle down in there, then there's one bolt to fasten it on to the pipe. Then there's just this little rubber piece that you stick in, to hide the hole where the bolt goes. Shouldn't take more than a few minutes to get her on there. Let me know if you struggle and maybe I'll make a short video about it.

[@HuntPost22]

Why don’t you want the rainbow effect? I thought that was a desirable thing.

[@Z900JerseyJared]

I'm ready to admit that I'm probably wrong about this one but maybe it's just a personal preference thing for me. If someone asked me how many rainbows I wanted on my motorcycle, I feel like my answer would be: zero. Can you educate me -- why do you think it's desirable?

[@samarsiddiqui142]

Need to know how you got the rubber part on the clamp

[@Z900JerseyJared]

Hey what's up Samar? I don't think there was any special trick to getting it on there but I do remember that it was very frustrating. I wish I had a better answer for you, but the best advice I can give is to try and be patient. Let me know if you're able to get it on there in the end.

[@MarreroClan13]

I can't put in the db killer. Any suggestions?

[@Z900JerseyJared]

It was somewhat of a tight fit but you should be able to get it in there. A few gentle taps with a rubber mallet ought to do the trick. Let us know what happens.

[@nepatriots77]

They didn't send you the dB killer?

[@Z900JerseyJared]

They did send it, but I thought I was gonna be cool and not need it (3:32) -- boy was I wrong! It was so loud on the ride that I had to turn around to go home and get earplugs in the first few minutes but it still wasn't enough -- kzbin.info/www/bejne/qn6Ve6Wjoa2KicU I installed the db killer the very next day. The install wasn't bad -- it just slips into the end and secures with one small bolt. Then you just cover up the bolt hole with a small piece of rubber. Hope this helps!

[@nepatriots77]

@@Z900JerseyJared Okay, I installed the exhaust a few days ago and tried to put in the db killer but it just won't fit in. Did you have any issue it fitting in the gap?

[@Z900JerseyJared]

@@nepatriots77 I remember it being a tight fit but I was able to get it in there. A few gentle smacks with a rubber mallet maybe?

[@nepatriots77]

@@Z900JerseyJared basically used a hammer to gently put it in

[@MarquisDeSang]

@@Z900JerseyJared I cannot fit the baffle it is tootight, have you use a hammer to fit it in there?

[@kevingonzalez1092]

Too dark can barely see anything

[@Mbear2018]

Will this fit on the ninja 400 2022 non abs?

[@Z900JerseyJared]

Hey Reign! (cool name btw) -- I just checked the LeoVince website and it does fit the 2022 model year. If you end up buying one, let me know what you think of it.

[@Mbear2018]

@@Z900JerseyJared haha thanks! I just ordered it actually and it should be here by next week. 🤟

[@MarquisDeSang]

@@Mbear2018 next week? 7 months later and no news from you? Just oreder mine.

[@Mbear2018]

@@MarquisDeSang it was compatible and it's great!