How to install Toyota Jack crane in right place. Corolla, Camry, RAV4, Prius, Avalon, Lexus Cómo instalar la grúa Toyota Jack en el lugar correcto. Corolla, Camry, RAV4, Prius
Пікірлер: 135
@kermodecarver2103 Жыл бұрын
Finally, a video that solves the 'mystery' none of the Toyota manuals bother to explain. Thank you!
@PeterFinnTheCarDoctor Жыл бұрын
Great !
@dantheanimator507210 ай бұрын
No lie…..had a 2000 camry that featured a metal bar that totally looked like exactly where one would put a Jack Bent the bar that put a crease in the panel below my door and I was almost completely puzzled how that happened. Never again! Lol
@dantheanimator507210 ай бұрын
@@PeterFinnTheCarDoctorthanks for the help!
@kenjutsukata1o13 жыл бұрын
I wonder how many of this video's views were from the side of the road XD well, here's one at least :-p
@PeterFinnTheCarDoctor3 жыл бұрын
Right, 😊👍
@icantfightchannel Жыл бұрын
Rn
@lumbernacdad10 ай бұрын
Mine was...
@oluwabusayoshofowora43729 ай бұрын
Haha this made me laugh.
@lizetontiveros11347 ай бұрын
Thanks a lot ! I haven’t had to ever change my tire until today and it wasn’t hard. Thanks !
@PeterFinnTheCarDoctor6 ай бұрын
Great to hear!
@drums4king Жыл бұрын
I thought the jack went between the two notches.... not on one of the two notches. Agreed that it took too long to show the process. Thank you for the tutorial Peter! Also, if you're changing the oil and go under the car, it would be great to see how to place a jack stand next to the jack for safety.
@PeterFinnTheCarDoctor Жыл бұрын
👍
@jguadarrama5463 Жыл бұрын
I’ve had to change a tire twice now & both times the car has rolled back a bit 😬🥴 luckily nothing bad happened & I managed to change the tire but I feel like I’m doing it wrong
@mojakhaha7 ай бұрын
@@jguadarrama5463 did you pull the ebrake and put it in park?
@lukasvigliotti49814 жыл бұрын
Dude great video u helped me out I was on break at work saw had flat and got to change
@PeterFinnTheCarDoctor4 жыл бұрын
No problem 👍
@inevitablecj41510 ай бұрын
Same thing with me wish Me luck
@TambouraBaptiste Жыл бұрын
Phew! Thanks man! My original manual had the silliest and hardest to understand image trying to show how. Unbelievable car though.
@PeterFinnTheCarDoctor Жыл бұрын
You're welcome!
@XDIambored2 жыл бұрын
Awesome video you said nothing but I understood everything
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@jerryanthonytonywest8476 Жыл бұрын
Awesome easy peasy !!!!!!
@PeterFinnTheCarDoctor Жыл бұрын
Thanks 👍
@jerryanthonytonywest8476 Жыл бұрын
@@PeterFinnTheCarDoctor yes sir , simple instructions without all the drama , AWESOME 😎
@januszjuszynski99464 ай бұрын
Everybody but one avoid this topic refering to the back of the car . There's no one solid part to use . So thanks much. I'm looking forward to seeing more in this matter . :)
@PeterFinnTheCarDoctor4 ай бұрын
Thanks for your comment👍😀
@abzer0302 жыл бұрын
You saved my ass. Thanks man 🙏🏼
@PeterFinnTheCarDoctor2 жыл бұрын
😂😃
@jimhorton32412 жыл бұрын
I think you've done a great job in showing us where to place the jack although I think you could have done it a little quicker maybe I'm wrong anyway thanks a lot for showing appreciate it
@PeterFinnTheCarDoctor2 жыл бұрын
Great point!
@theswords3023 жыл бұрын
Talk dude
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@bottle1211 Жыл бұрын
Thanks I needed this video today haha
@PeterFinnTheCarDoctor Жыл бұрын
Good 👍
@iwirt6347 Жыл бұрын
it should be between the two (2) notches ....
@PeterFinnTheCarDoctor Жыл бұрын
👍😀
@themonkertins7042 жыл бұрын
It's supposed to be between the notches.
@PeterFinnTheCarDoctor2 жыл бұрын
You're welcome 😊
@dahveedl31332 жыл бұрын
Missed it by that much. Get smart.
@Cypher812 жыл бұрын
Thank you i was about to make a big mistake 🤣👌🏻
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@Rick-the-Swift2 жыл бұрын
You were about to lift it from underneath the gas tank weren't you?😆
@Cypher812 жыл бұрын
@@Rick-the-Swift haha not that Much but i was about to Crush something for sur
@stephsun89972 жыл бұрын
This is super helpful! Thank you
@PeterFinnTheCarDoctor2 жыл бұрын
I'm so glad!
@MrAtesz242 жыл бұрын
What the hell are you doing man for so long? Within this time I already replaced one wheel..
@PeterFinnTheCarDoctor Жыл бұрын
Thanks and Cool info. 👍😀
@2339091q2 жыл бұрын
I want to see the next video: how to raise the jack using this wrench! It is very hard for me. :)
@PeterFinnTheCarDoctor2 жыл бұрын
Noted!
@eda3966 жыл бұрын
Thanks Peter, very useful
@PeterFinnTheCarDoctor6 жыл бұрын
Thank You very much for feedback. :-) Regards Peter
@rumeshikanuwanthi35354 жыл бұрын
Thank you..
@freddiewatkins9369 Жыл бұрын
Once you know where the jack is placed just remember to jack up turn clockwise or towards the rear tire and to let it down turn towards front tire
@PeterFinnTheCarDoctor Жыл бұрын
Thanks
@brentonjunioretienne7903 жыл бұрын
Thanks for the video
@PeterFinnTheCarDoctor3 жыл бұрын
Our pleasure!
@michael_tf22 жыл бұрын
Im a mechanics son but i ended up here
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@jeramyroberts80542 жыл бұрын
Appreciate you posting this video. Now I know where to position my Jack for my 2019 Camry SE.
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks 👍😃
@generalkrang71382 жыл бұрын
helpful! Thank you!!
@PeterFinnTheCarDoctor2 жыл бұрын
Glad it was helpful!
@rattlesnake215311 ай бұрын
You should jack it behind rear tyre there is spring it will lift up,
@PeterFinnTheCarDoctor11 ай бұрын
Good point, Thanks Sir 👍
@nicolas267s Жыл бұрын
2022 model looks completly different
@PeterFinnTheCarDoctor Жыл бұрын
Thanks Sir 😀👍
@bryans2790 Жыл бұрын
What a lot of amateurs on YT fail to realize is that the jack is not supporting the vertical part of the pinch weld. It is supporting the inner horizontal frame at the base of the pinch weld. At 2:57 you can see this. So if you are using a trolley jack, you need some adaptor so you can support the frame.
@PeterFinnTheCarDoctor Жыл бұрын
Noted
@Rick-the-Swift2 жыл бұрын
You should do a voice over, with a thick Russian accent or something. That'd make it more entertaining than the sign language for sure 😁 Thanks! Take care!
@Rick-the-Swift2 жыл бұрын
Also I should've pointed out, the video is very annoying in the fact that you never. explain or pan out to show whether you are working on lifting front, rear, driver, or passenger wheels. This is still probably helpful to those who don't mind straining to figure out what you're up to, but needless to say, if you are going to make the effort to make and publish an instructional vid, you could be just a bit more clear about the process. Hope that helps, take care now 🙂
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks for the tip
@dgchvz5 ай бұрын
I NEED TO SEE HOW TO USE THAT HOOK THING PLEASE
@PeterFinnTheCarDoctor5 ай бұрын
Thanks and noted 👍
@tungtung42297 ай бұрын
A mechanic just replaced the front absorbers of a corolla 2000 with Gas type absorbers. After that I jacked the car up (liked shown in the video) but the front wheel did not lift off the flat ground. What is wrong or did I not jack up high enough ? Thanks
@PeterFinnTheCarDoctor7 ай бұрын
Ok, noted 👍😀
@blackironman49475 жыл бұрын
Nice hand language😂
@PeterFinnTheCarDoctor5 жыл бұрын
Yes Sir. :-)
@edwardjones13053 жыл бұрын
I got woozy
@PeterFinnTheCarDoctor3 жыл бұрын
Glad to hear that And Thanks 👍
@vktengizik99164 жыл бұрын
Dude how about front lol ? Or you change wheels only in the back ?
@PeterFinnTheCarDoctor Жыл бұрын
Same thing
@danielbungay69713 жыл бұрын
thanks very helpful for newbies
@PeterFinnTheCarDoctor3 жыл бұрын
Glad to hear that!
@KaranJesrani4 жыл бұрын
Awesome, very useful
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@OPP8412 жыл бұрын
Can you lift using spare jack then use jack stand? Because the jack point are the same how to use spare jack together with jack stand?
@PeterFinnTheCarDoctor2 жыл бұрын
Yes
@hugoltrin Жыл бұрын
3 minutos subiendo el gato y todo para que no le atine !!!! 🤦🏽♂️
@PeterFinnTheCarDoctor Жыл бұрын
👍
@mark1952able3 жыл бұрын
Good job with instructions! Thanks!
@PeterFinnTheCarDoctor3 жыл бұрын
Glad it was helpful!
@7ate9100times Жыл бұрын
Put it there. It cracked my sides, slipped out and almost killed me. Im not sure what i did wrong. I just want to do my oil change 😢
@7ate9100times Жыл бұрын
I have a 2010 corolla LE.
@PeterFinnTheCarDoctor Жыл бұрын
Hi, Yes and Thanks for comment. 😃👍 So, you need a better and Safer way to work. I will do new video to: How to safer way Replace motor and engine oil. ( Jack and Hoist and Crane )
@johnjackson72954 жыл бұрын
Just show where tout it already!!!!!
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@garyjohnson45753 жыл бұрын
You could prop the phone with anything...and have two hands!
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@hisnewlife3543 Жыл бұрын
You can talk dude.
@PeterFinnTheCarDoctor Жыл бұрын
👍
@TheVpajic4 жыл бұрын
Toyota didn’t make it very intuitive. Thanks
@PeterFinnTheCarDoctor4 жыл бұрын
Why do you think so?
@fedicamptv2 жыл бұрын
@@PeterFinnTheCarDoctor it’s snowing today that was hard to find
@jackman2865 Жыл бұрын
I dump my scissors. Bought a bottle 8 tone bottle jack.. faster, higher and easier.
@PeterFinnTheCarDoctor Жыл бұрын
Thanks for watching! 😀👍
@johnjackson72954 жыл бұрын
Why is it taking him so long
@markrutte56373 жыл бұрын
he's holding the camera with one hand and using one to use the jack.. genius...
@theshield22072 жыл бұрын
What a true genius you are
@PeterFinnTheCarDoctor2 жыл бұрын
👍😃
@tripledoublestuff23 күн бұрын
that was painful to watch
@PeterFinnTheCarDoctor20 күн бұрын
Thanks for Your info 👍😀
@jonnygti3 жыл бұрын
So you Jack up a car on a thin piece of metal? I was looking for a big square block of metal or something flat
@PankajKumar-ft7lc3 жыл бұрын
The thin part fits in the indentation only, it doesn't bear any weight. There is a flat part behind the thin lining.
@jonnygti3 жыл бұрын
@@PankajKumar-ft7lc ok thanks 👍🏻
@AbdelwahidSabri-2024 Жыл бұрын
I do not know, you are not a professional and you do not master the mechanical work, you made many mistakes, there is no need to mention them, a simple job that you failed in, so how can we be confident in your other works
@PeterFinnTheCarDoctor Жыл бұрын
Nice to hear that someone is smarter than me. I really appreciate the information.
@AbdelwahidSabri-2024 Жыл бұрын
When I directed my criticism at you, I and all those who saw you and expressed their discontent with your heinous act, I addressed my words to you and I will not express my discontent, because I know that I specialize in the field, as for you, you have to sell eggs, exhort the mechanics@@PeterFinnTheCarDoctor
@thestuff43212 жыл бұрын
Use your words man
@PeterFinnTheCarDoctor2 жыл бұрын
Hello. I try to be better in future.
@juliusmelgoza16244 жыл бұрын
Bro wtf..u spent the whole video putting the Jack on..last video please .thumbs down
@PeterFinnTheCarDoctor4 жыл бұрын
Good Comment and Thanks My Friend ! More comments like That are Welcome ! 👍🤠
@rafaeldeleon2253 жыл бұрын
That's the video some of us need.........
@__deebzz__3 жыл бұрын
@@PeterFinnTheCarDoctor Don’t mind this idiotic comment.. The other videos about this subject are trash
@kevynramsaroop79002 жыл бұрын
😅😅😂
@ScubaFishNerd4 ай бұрын
Don't listen to what this guy says, he'll get you killed, lol. Not that he even talks in the video telling you what to do anyway. He doesn't even put the Jack in the correct place. It's supposed to go between the two notches. And for further instruction for those who don't know what to do, it's supposed to be used in conjunction with a jack stand for safety also. Where is that? This guy has nerve to call himself the car doctor? Lol.