How to Install Tracks on a Mini Excavator - THE EASY WAY

  Рет қаралды 13,892

Neal O'Russa

Neal O'Russa

3 жыл бұрын

DIY Excavator Track Replacement! This machine is a Kubota KX71-3 and we got a little help from the Kubota BX25!
Enjoy & subscribe today - / nealorussa
Much simpler process than i showed in a previous video. Previous video showing roller replacement & other undercarriage repairs here - • Kubota KX71-3 Mini Exc...

Пікірлер: 14
@IROCKID
@IROCKID 3 жыл бұрын
Part of the trick is to put something under the droop so that you don’t have to “drive” the track off like that.
@NealORussa
@NealORussa 3 жыл бұрын
Thanks. I guess I could have lowered the machine back down to get rid of the droop but the drive off method seemed to work really well!
@silverrussell1978
@silverrussell1978 2 жыл бұрын
Why did you change the tracks out? The ones you took off didn't look bad from what we could see
@NealORussa
@NealORussa 2 жыл бұрын
Hey Silver! The old tracks did have decent lugs left on them, but they did have some cracking in them and I ran across these at too good of a deal to pass up. I kept the old ones just in case. Thanks for the comment!
@truthclips
@truthclips Жыл бұрын
excellent video, thx!!
@NealORussa
@NealORussa Жыл бұрын
No prob thanks for the comment!
@ricos6243
@ricos6243 2 жыл бұрын
Great video. Made it look easy. What would you guess a track weighs? I just broke one today.
@NealORussa
@NealORussa 2 жыл бұрын
Thanks for the comment! I'd have to say it weighs around 200? It's really floppy and awkward to handle though.
@ricos6243
@ricos6243 2 жыл бұрын
@@NealORussa Yeah it looks like the floppy part would be the struggle. Thanks again.
@NealORussa
@NealORussa 2 жыл бұрын
I have another video where I do it without another machine. It's not too bad if you're on concrete. Check it out!
@NealORussa
@NealORussa 2 жыл бұрын
@@ricos6243 kzbin.info/www/bejne/fambpYuJhp6VjZo
@ricos6243
@ricos6243 2 жыл бұрын
@@NealORussa I took it off today. Have to find one tomorrow. Was pretty easy using the bucket on the machine to push the grease out. A ll ready to install. Not light by any means. Your video helped a lot. Thanks
@michaelargenta3856
@michaelargenta3856 2 жыл бұрын
How much do the tracks cost these days?
@NealORussa
@NealORussa 2 жыл бұрын
Back when I bought these I found them on eBay from a bobcat dealer who swapped steel tracks onto a new machine and had these leftover. I only paid $1325 for them shipped.
Learn How to Change Your MINI EXCAVATOR Tracks in Minutes!
9:15
How to put the the track back on a mini excavator without any tools
7:54
High Performance Earthworks
Рет қаралды 41 М.
Получилось у Вики?😂 #хабибка
00:14
ХАБИБ
Рет қаралды 6 МЛН
Heartwarming: Stranger Saves Puppy from Hot Car #shorts
00:22
Fabiosa Best Lifehacks
Рет қаралды 15 МЛН
How to remove and fit a rubber track on a Kubota mini digger
9:29
How to remove and replace excavator tracks the easy way
3:37
Replacing bushings on a Kubota excvator
10:06
Stephen Cox
Рет қаралды 92 М.
DIY Tree Stump Removal - Kubota KX057 Excavator
16:01
Messick's Farm Equipment
Рет қаралды 145 М.
Chinese Mini Excavator Mods: Fan Install on our Agrotk H12 (or QH12, QS12R)
10:01
Mini excavator track tension
7:33
Sean Markee - SRM Contracting
Рет қаралды 13 М.
Track change bobcat e32
14:20
tommy1504
Рет қаралды 51 М.
How To Put A Track Back On A Mini Excavator
6:21
Dirt Ninja
Рет қаралды 415 М.
Cat Tommy lost his love…💔 #cat #cats
0:27
Prince Tom
Рет қаралды 24 МЛН
Quando ACELERA eu faço MAIS GRANA 💰
0:16
Hermann Greb
Рет қаралды 56 МЛН