HOW TO: INSTALL TURBO BOOST CONTROLLER & GAUGE STAINLESS EXHAUST ISUZU 3.0L DDI i-TEQ DIESEL ENGINE

HOW TO: INSTALL TURBO BOOST CONTROLLER & GAUGE...and also welding and install STAINLESS EXHAUST.
If you've ever bought one of these entry-level DynoRacing boost gauges and/or controllers, you know that the instructions are terrible at best, or non-existent at worst. Figuring out the wiring and tubing connections can be extremely frustrating!
HERE, I WILL SHOW YOU WHERE THE WIRES GO AND HOW TO CONNECT YOUR TUBING.

[@TheA-iu9ip]

The setup at 10:16 is different from 11:52. The waste gate isn't connected anymore to that little tube in the turbo. Where'd you connect it? It should be connected there right? Do you have other video of this showing the final setup?

[@offgridislandfamily]

Yes, because I wanted to reach 1.8bar. With the wastegate connected, it wouldn't pass 1.2bar. But after the new head and head gasket, the boost goes back to 1bar. ;-)

[@NSJUBILADOS]

Mais um capítulo da série cuidados especiais do 40M40

[@offgridislandfamily]

Sim senhor, também tenho pessoas a pedir-me para fazer os seus carros, por isso publico vídeos para o caso de poderem ajudar outra pessoa. Especialmente estes medidores sem instruções! ;-)

[@nanabrimpong3485]

You need to setup a big shop bro.

[@offgridislandfamily]

ABSOLUTELY! Maybe will have starting in December! I HOPE!

[@nanabrimpong3485]

hey guys waiting to see you build-up the property. You really making gr8 videos putting Philippines on the scope.

[@offgridislandfamily]

Thanks very MUCH for that! I'm working hard. One video can take 12 hours or more for editing alone. I'm very happy to hear it's not in vain. ;-) We are planning on starting videos on the house stuff in the next few months. Thanks MUCH if you SUBSCRIBED and for continued participation with us! ;-)

[@nanabrimpong3485]

@@offgridislandfamily Sometimes I think you should just upload the raw videos and its even better. I know you try to keep it short but dont be too bothered. Use that time for other videos or other stuff.

[@offgridislandfamily]

@@nanabrimpong3485 I LOVE this input. Exactly the kind of advice I need to hear. My videos seems to have a high 'skip-through' rate and I thought that it's because they are too detailed or long, but maybe it's because too much editing? Anyway, I WILL take your suggestion and do just that. CHEERS! Please feel free to communicate any other recommendations! SALAMAT PO!

[@nanabrimpong3485]

@@offgridislandfamily sure, will do.

[@nanabrimpong3485]

@@offgridislandfamily When you complete your house you might want to build up a nice Airbnb on your land with some fruit & veg garden for some passive income. You would be surprised to see some travellers turn up there and the good reviews would drive people over regardless of the location because people like hideout locations. There are a lot of travellers who would patronize it. A nice separate building with ensuite rooms and kitchen or a dining area or a restaurant area will do just the job. think it over, serving some continental foods and American grills and burgers or barbecue. people will come

[@JuvallyLescano-yt6zv]

try our ECU remapping More power more torque

[@offgridislandfamily]

Eliminating the waste-gate added JUST enough extra power...safely.

[@teamchoi29]

Can you put a blow off valve on your pajero? I would love to see pros doing it bfore putting one mine.

[@offgridislandfamily]

Well, there is really no need for me...my stock turbo can't boost beyond my preferred limit of 1.7 bar anyway. VERY rarely goes over 1.5. HOWEVER, when I finally have the money for the KINUGAWA 15T turbo, THEN I will be able to use a blow-off valve and prefer that to a waste-gate system. If I get enough Subscribes, Likes & Shares, I will be able to do this. Cheers!

[@teamchoi29]

@@offgridislandfamily just keep on filming what you are doing. You'll get there for sure🤘👊

[@offgridislandfamily]

@@teamchoi29 MAN...I REALLY appreciate that. Working hard and trying to bring USEFUL info...and maybe a bit of fun with it. ;-)

[@panyalvius1]

This workshop is yours ? What do u do for a living ... Always love ur videos and the patience u have while dealing with mecanical issues..

[@offgridislandfamily]

This shop was borrowed for the exhaust installation only. Working on setting up my own work area. I used deal collector cars internationally...between USA, Europe and Japan. Now gradually going broke... ;-)

[@panyalvius1]

@@offgridislandfamily thanks.. naa u wont keep up

[@offgridislandfamily]

@@panyalvius1 Won't keep up? With what?

[@panyalvius1]

@@offgridislandfamily u wont go bankrupt... 😃

[@offgridislandfamily]

@@panyalvius1 I sure hope you're right. To be totally transparent, I'm having many sleepless nights over this lately.

[@DeckCain]

Electronic boost controller is more convenient one, cos can be installed and regulated inside cabin.

[@offgridislandfamily]

Yeah, but I just set mine at the max I'm comfortable with and leave it. So far, so good. ;-)

[@orestispappas1613]

I instal corect boost gauge on turbo diesel also without booster controller but its stay on 0.1 bar. Its not change it .... The turbo works ... I dont know whats going on

[@offgridislandfamily]

Do you still have the pressure release valve attached on the intake manifold?

[@sphinx501]

@@offgridislandfamilyi have delica starwagon , i want to install a manual boost controler .. do i have to delete the pressure release valve?

[@offgridislandfamily]

@@sphinx501 Exactly...this valve on the back or top of the intake manifold will exhaust any pressure more than 0.9 bar. BE CAREFUL. I personally would not use more than 1.2 bar boost. I pushed mine to 2 bar and now replacing the head and head gasket. 😅😅😅

[@nanabrimpong3485]

I think the boost Gauge would have been best mounted on the top left corner of the dash to make the driver keep the eyes up on the road, rather than having to look down to see it. You might want to try relocating this to see how it best fits, I was thinking you might have tried this already but I don't know the reason for having it down there. Is it to keep it hidden from police or what? Please try to put it on the top left corner of the dashboard for the driver. Thanks

[@offgridislandfamily]

You're probably right about that and it was my suggestion, near the left A-pillar, but as this truck is always sitting all day in the hot sun, he preferred having it out of the way so it doesn't cook in the heat. I completely agree. And...it's only for very occasional monitoring to be sure it doesn't suddenly shoot past 20psi. Thanks for the observations!

[@nanabrimpong3485]

@@offgridislandfamily I understand. But he could get the sun screen for the front windscreen to protect even the dash and keep the vehicle cool. Well its the owners choice.

[@offgridislandfamily]

@@nanabrimpong3485 I agree again. I've used sunshades religiously since I was a teenager with my first car.

[@offgridislandfamily]

Hope you are ok! No news for a long time.

[@nanabrimpong3485]

@@offgridislandfamily I am good and thanks for checking on me. I nearly gave up on you because things wasn't going as I hope you will do. I think you need to go a bit aggressive for your channel. Because everyone is coming to Philippines to grow thier channels and making lots of money out of it. So tell me how is the online jobs going in tandem with your KZbin? And how is the house development going? And what have you done with the other property? I think you could also try and setup some backpackers dormitory on your land for travellers also for some extra cash. Just a basic one with a traditional structure and make it self catering. It could also fetch because not everyone likes to stay in resorts.

[@snowbert7800]

Cat delete or intact

[@offgridislandfamily]

At the beginning, I show the whole run of the exhaust from tailpipe to exhaust manifold. I don't see any cat...do you? We thought this was strange, but it seems not to have had one.