How to Install Ubuntu 24.04 LTS on Mac (M1 | M2 | M3) | Run Ubuntu on Apple Silicon Using UTM

[@josetanito]

After a long struggle trying to get Ubuntu running on VirtualBox-and a lot of frustration-I finally made it work thanks to UTM and ProgrammingKnowledge! This was, by far, the most helpful video I’ve ever followed. Ubuntu is now running smoothly. Thanks a million!

[@c0rti_s0l]

Everything worked well the first time. That's rare for these kinds of videos. Thank you, I needed this for a university project.

[@riteshranjan4938]

how much memory did you alloted ...and how many cores ? mine is 256gb variant

[@riteshranjan4938]

How much it took for " installing system" step ?

[@c0rti_s0l]

@@riteshranjan4938 8 cores (after installing), and the installation took at least an hour. Maybe two hours, I didn't keep track of it.

[@piyussh_]

How much did you allotted?​@@riteshranjan4938

[@Exclusive20_04]

same

[@eberkomeb2]

You have the best video about installing UTM and Ubuntu. I tried and failed miserably to install Ubuntu on my UTM. After following your guidance and directions, I finally have Ubuntu with an integrated GUI on my macOS. Keep up the good job, mate. Thank you.

[@krishnabasnet3024]

Thanks buddy, I was searching daily for a week to find the right video.

[@relaxpieces9611]

Thanks a lot!!! the only thing is that whenever I open UTM it takes few minutes showing "DISPLAY NOT ACTIVE" I will appreciate a lot if you know how to solve this issue

[@AmanChoudhary-nh6sz]

same

[@sahil.sartaj]

+1

[@risvinks2195]

Same

[@sahil.sartaj]

@@relaxpieces9611 resize the display may work try that

[@Whiperdor]

Thank you so much for this video, was getting frustrated because i got a lot of errors and got into uefi shell with Virtual Box, then i found your Video and just did everything like you did and worked 100%. Thank you Sir !!!

[@dimdimich7658]

Awesome video! - everything worked Thank you very much! One note for those who install Ubuntu UTM on corporate networks - by default the installed VM uses Shared network mode. It didn't work for me so I switched to Bridged mode and it worked like a charm

[@ManojKrVerma-vw4dx]

The video I was looking for. Thank You for your efforts. Everything goes well in first attempt itself.

[@cruisecruisecruise]

well presented and simple to follow. Many thanks for this tutorial.

[@joshditto5306]

Wow. Seriously such a good video. Well done! It worked perfectly and was very clear and concise. Thank you!

[@yohangelmorales615]

Amazing. It worked on my M1 Max!

[@Ann-lo8cg]

Thank you so much for the detailed instructions. I came here with little hope after multiple hours spent on installing virtualbox on my mac M1 unsuccessfully. It took much longer for my pc to finish the installation in 11:44, the whole night and another two hours the next day. However, now it seems to work fine. Only one question, the time shown on my linux is ten hours behind, not sure why it's this way. Hope I will figure it out!

[@viditk]

Perfect instruction! Perfectly paced and everything worked right away! Thanks a lot!

[@bakeraus]

Great tutorial, nicely paced. Appreciate your efforts

[@belledockhorn]

Thank you for having this tutorial posted!! step by step you are my hero!!

[@mihirsangale8839]

Thank you so much!! Each and every step was executed flawlessly!!

[@brittney5177]

All I have to say is thank you SO MUCH for this video. You just saved me so much time and pain trying to figure this out on my own. Worked perfectly for me!!!!

[@bodlinfeng6231]

16:46 the problem is that after overloading, the car does not move on. It hung stupidly. What to do?

[@tisapakwan8012]

Same here

[@tisapakwan8012]

Omg it worked.. wait for few more minutes … I bet you did that

[@olehvelychko5633]

@@tisapakwan8012 ... This made me confused too )

[@IsuruPiyarathna-j6q]

Thank you so much. everything worked in first attempt

[@milanmills2824]

How long does it takes to finish installing ? Mines been running forever 😭

[@nb788-j4y]

did it finish? I m having same issue as well right now

[@samridhibeohar752]

@@nb788-j4ysame issue with me also

[@CarotCarrotCirot]

2-3 hours depends at how your pc's performance

[@ArindomPratimBorah-dc6mm]

Same here

[@samridhibeohar752]

@@ArindomPratimBorah-dc6mm restart your utm and try again, it should work

[@deepaktheguru]

Thank you for such an excellent video. To the point, precise instructions and the guide. Great effort and such videos are rare. Keep up the good work.

[@DuddyDudd-uf7lg]

As others have said this was a really good video and at a good pace to follow. Gave up on Vbox as had no success with that route. Have always managed with Vbox in the past before they were bought?! Only problem I am having is screen display takes a while to appear. Is there a graphics setting that would improve this. Thanks again for the video

[@emrekabasakal1619]

"Display Output is not active" how to fix this (macbook air m3)

[@sahil.sartaj]

+1

[@Exclusive20_04]

Life saver thank you bro 👍

[@chrisw5509]

Thanks for an excellent video! Your instructions are very clear and easy to follow.

[@KOLUKULURUDILLIPRASAD]

Hi Bro installation issue. It's not showing reboot now. 11:44 help me out.

[@ksidhartha]

shutdown the UTM and try again. Try not to change screens while installing

[@ipikluninja91]

Thanks for the wonderful explanation!

[@vaibhavtasgaonkar5221]

This tutorial really helped; great video

[@palashwarghane1420]

Thanks man , this was really helpful

[@harivishnu.g]

Best tutorial I ever seen Thank you

[@rsbackyard]

Great Tutorial. Thanks man.

[@Sneha-hp4sh]

hii I followed every step correctly but I am having this issue as I am opening the VM it's showing display output is not active

[@mbs4167]

Thank you very much everything went smoothly

[@webdeveloper7777]

Thank God you exist, you saved my life hahaha

[@Spenc083]

Awesome video and instructions everything was spot on, thanks for sharing the knowledge.

[@LeliaNwabunor]

Thank sooooo much for this video, it helped me with my homework!!

[@christianjourneytv1003]

This video is very helpful. it works. thanks

[@sftafd]

Thank you very much for this video 😀

[@shaheedvk2316]

clear explanation, thank you so much.

[@alexisottolini4366]

PERFECT!!! REALLY PERFECT EVERYTHING THANK YOU! I WILL RECOMMEND

[@viridianam1492]

thank u so much! I've got it succesfully :)

[@Peywan]

thanks a lot you helped me out here !

[@kanavpeer7926]

everything worked. Thank you

[@sargumgill3031]

Great video,really helpful. luckily, I got this video. Thank you

[@Faisal-ss1ff]

thank you bro

[@dusanstoiljkovic2311]

Appeared a curtin bug during installation kernel.

[@arnalow3617]

it took for me more than 10 minutes... I think you just have to wait because it will probably works after a long time !

[@samridhibeohar752]

Is it similar like virtual box?

[@tasnimlabiba1084]

A very very very useful video....thanks a lot..✨

[@atharvkadam3067]

Thats a great video its working very smoothly in M1 mac thank you so much!

[@riteshranjan4938]

how much memory did you alloted ...and how many cores ? mine is 256gb variant

[@albertoeffe8524]

can you run every program or are you limited by the arm cpu? is it fast?

[@riteshranjan4938]

@@albertoeffe8524 yes we can run every program....it does not depend on arm cpu since it is only used to virtualise on ARM cpu

[@lonen3rd]

Thanks for this. I had downloaded the desktop amd64 iso image unknowingly.

[@FamXi]

thanks bro, for this video it's work for me.

[@antoniopm8088]

thanks for this video, it helped a lot

[@marouanaitslimani6460]

thanks, this was life saving

[@AbhijitDas-t5o]

The GUI is not coming up after the reboot now command. It's showing 'Display output is not active'. How to resolve this? Please help.

[@JGANESH2155]

Did you get anything??

[@ShoaibKhan-d3d]

I think you just have to wait for a while, it takes time to for the first time to load.

[@JGANESH2155]

@@ShoaibKhan-d3d Yes,Thank You..!!

[@satviksharma5147]

a big thanks ! very hepful

[@anmolchauhan1250]

I am very thankful to you this video is very helpful for me

[@ToHungDuong]

Thanks, You save my day.

[@ilbeyahmetoglu5564]

Dude, You are a life saver. THANK YOU SO VERY MUCH. You saved me hours.

[@Terrence7777]

Thank you so much nice video

[@jokevoke]

Thank you so much.

[@vadimviner2530]

that's really cool, thanks man

[@sameljko]

I have QEMU error when i click on Run button at 7:10. Please help

[@RashmikaSatish]

Did you figure it out??

[@tuyensinhftu3221]

@@RashmikaSatish no not yet

[@sameljko]

@@RashmikaSatish nope not yet

[@musicbyrish]

thanks work smoothly

[@aditrastogi7741]

does the installing the kernel takes time 11:32 ? for me its taking forever

[@sachingsundar4561]

It takes long time .Wait for the result

[@maryame.]

thanks! works as of 2024

[@dimakozach9416]

Absolutely incredible!

[@julieta1790]

Thank you so much!!

[@majab.3032]

Thank you!

[@HemangJoshi]

Wow awesome 🎉🎉🎉

[@ilovecookiespvp]

The only issue I had was installing the Spice guest tools. After trying to just install them individually, the installation was successful with no issues.

[@AbhishekKumar-sj4sq]

why its showing display output is not active always?

[@chanhtructran8375]

Thank you for your instruction. I installed successfully. Why I did not see the software center?

[@TamilSelvan-xf6ut]

the mirror links do not seem to work at all. is there any work around for this?

[@shivamdhiman3488]

display ouptuput isnot active problem

[@SuperYahoom]

I am all black on this topic but still want to ask why do i need to install UTM, what purpose it will serve?

[@riteshranjan4938]

UTM will serve as virtual Box and it will let us emulate/virtualize the Ubuntu OS ...which won't be possible without UTM or any virtual machine/Box

[@jojvannu]

i am getting "Display output is not active" using m3 pro, could any one provide solution for this ?

[@sololololos]

I'm also getting this. I've been getting it ever since I recently updated UTM. Did you manage to solve it?

[@jojvannu]

@@sololololos no still issue is there, so dropped the plan and using Mac environment instead

[@sololololos]

@ I just tried installing everything again from scratch and when I saw the “display output is not active” again, I just left it running and went to the other room. When I came back about an hour later it was on the Ubuntu login screen. 🫢

[@PavithraMG_sjsu]

Thanks a lot!

[@balajisanga946]

is any thing happens by downloading amd

[@Jason-zu7kl]

is there any way to make vm load faster ? My ununtu takes like 10 minutes to open everytime

[@vanshkalra6734]

Having the same issue

[@Stillgar27]

Same here. Any luck so far, pls?

[@bodoorbedoo9363]

13:10 login incorrect why?

[@bodoorbedoo9363]

What is the problem? Reply to me please

[@HemangJoshi]

What if I want to permanently replace mac os with Ubuntu? How to do this. Please make a video on this.

[@mazennoop9411]

thank you so much

[@travelcompass591]

🤠 Hi, great tutorial. Questions: 1. Can Ubuntu be installed as a replacement OS on a M1? 2. DO I need to do other tweaks to plug an external HD as a default HD? Thank you 👍

[@amycoto7805]

THANK YOU!!!

[@ZubairAnsari-w1c]

13:16 , why am I not able to enter the password?

[@MUCHATopic]

I also have this same problem

[@MUCHATopic]

I found out, the password won’t show. Just type your password and hit enter

[@HemangJoshi]

Ubuntu is the best🎉🎉🎉🎉

[@balajisanga946]

how to install chrome in this arm64 image please do a tutorial for this

[@deepanshuk2555]

sir my last step is not working i am unable to copy paste files in ubuntu to mac?

[@avviii02]

Me too

[@cruisecruisecruise]

right click away from any files that are shown on the page otherwise you will not see 'paste' option.

[@jesuspache9365]

De mucha ayuda. Gracias.

[@saurabhmishra979]

how can we use webcam on ubuntu in utm on macbook ?

[@patrycjajakubowska7559]

How to get a letters and number more more bigger in UTM?

[@patrycjaduliasz]

Thank you my friend i love you you are my hero

[@Innocuous_Panda]

How do I get rid of the top toolbar? (white UTM bar on the top).

[@MarwaneAmal]

thanks but i can not more use command tab to switch between apps :(

[@ahmadelturky98]

Thank you...

[@AnickRazibul]

I have install ubuntu successfully on UTM watching your video. Really appreciate it. Extremely helpful. Thanks for making our lives easy. I do have a problem that I am looking for solution. I would like to access application that I am able to access within host machine VPN. At this moment I cannot access web application from my ubuntu vm, even-though I changed network config to Bridge network. If you know any steps I can try, would really appreciate it.

[@numikomar]

thanks man working well, if someone struggling with UTM, try VMware Fusion!

[@samsilarefin5546]

mirror address failed to connect. how to solve it

[@arvio.ardana8785]

why is it diffrent for me, when i start the ubuntu it show UEFI Interactive shell and i dont knwo hot configure it

[@shakyelija]

I like the installation guide but there was alot of unnecessary steps if you just got the regular amd. it cuts out all the additional steps.