How To Install Wireless Car Door Logo Lights | Step-by-Step DIY Tutorial & Review | In 4K!

[@DriveAndBeDriven]

*Logo Puddle Lights!* _Would you consider installing them in your car?_ Let's try to hit 250 likes!!! *In case you missed it, here's the complete list of materials used in this video:* - Wireless Logo Lights Kit: amzn.to/3fuyfKT - AAA Batteries: amzn.to/31iYUVL *Don't forget to comment!* What car mod would you like to see next? 🔴 Subscribe → goo.gl/nBFM42 📸 Follow us → instagram.com/DriveAndBeDriven *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@anthonylambing3831]

So for me I’ve tried the 3M tape and Velcro tape and it’s never been able to stick anyone have advice?

[@larrybrisbane2390]

Yes

[@classicanonymous4604]

Thank you so much!! I purchased a USMC logo courtesy light kit for my husband's Audi for his birthday!! I am super excited to surprise him!! his morning starts at 4: 45 so the first time that he opens his car it's going to show the courtesy light of the USMC logo and I am super excited!! Thank you so much!!

[@JohnDoe-mi7tj]

The clearer vidéo from the three I have seen. I have ordered a model from Ali express and it came without ANY explanation..thank you again

[@NassauCountyAquariumSociety]

Thank you for the easy straightforward instructions. I just received mine, and there were no instructions included. You saved me a lot of trial and error.

[@angelameyers-schlup3373]

Thank you for the tutorial, I just bought a pair for my black Hyundai El and wasn't exactly sure how to install it. I love the colors and I can't wait to see them at night and hear the comments on how cool they look 😊

[@kenlong5033]

YES. This video was very helpful and better than the other instructional videos. Thank you.

[@subahamshaikmydin7812]

Great explanation and easy step-by-step how to install these wonderful items i am planning to get it for my car and it will be exciting .

[@OdalysFernandez-up3gb]

Thank you for your video . I bought one like those but other brand and I didn’t know how to put it until I see your video. Thank you for your time

[@Kahlila1011]

Super helpful since the directions on the box were unclear. Thank you!

[@MasterCarsReview]

Loving these DIY videos. Good job Marcus.

[@DriveAndBeDriven]

Thanks, man! More to come! I had a blast making these DIY videos. 😎 *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@beezoful]

Another very informative video. Nice work. I like the light logo idea.🔥

[@DriveAndBeDriven]

Indeed! When I saw these online, I knew I had to test them out and provide a helpful installation tutorial. The logo adds a cool customization touch for sure! More videos on the way. *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@kittysglamrides]

I didn't know it was this easy to install logo puddle lights. Now you've got me thinking...

[@DriveAndBeDriven]

Yes! So easy, Kitty! I was honestly astonished myself. Literally, just paste and play. Haha! Loving them so far. Wooohooo! :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@lawlevph]

Nice tutorial videe bro. This is the most systematic instruction for installing courtesy lights that I have watched. Subscribed already for more organized tutorial like this. Thanks bro and keep it up!

[@DriveAndBeDriven]

AWESOME! I'm happy to hear this! These compliments truly mean the world to me! Thank you for watching all the way through and dropping a comment, man!! I appreciate your sub! Can't wait to share more reviews and DIY videos with you. Definitely stay tuned, Lawrence!!! 🔥 *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion"_

[@CADL63]

Thanks! I'll install my light correctly now!

[@vinsonmorgan8133]

I thought about installing this on my 2018 chevy traverse

[@DriveAndBeDriven]

Hi, Vinson! You totally should! They've held up extremely well inside of my Veloster. I'm still loving them to this day. They really add another element to your ride. Especially at night! TRULY STRIKING! Thanks for dropping a comment, man! I really appreciate it! More videos are on their way, so please stay tuned!!! :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@kieranbrady262]

Cool video bro, definitely want to do this with my bmw.

[@knightrcer]

I was going to get these if you could just hook it up to your computer at home via usb cable and just copy and paste what images you want to see on each using a software or just drag and drop images to a folder on the unit. Seems crazy that this day and age it needs a miniature slide instead of a file on the device.

[@dubzftw4821]

Amazing quick and short Diy

[@DriveAndBeDriven]

Glad you liked it! I had so much fun making it. Your support is truly appreciated! *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@johnniewalker9737]

Brilliant m8. One of the best explained examples on you tube. Cheers from the UK.

[@natashacarlo1558]

I love those lights...so unique!

[@DriveAndBeDriven]

Indeed! Very unique! I'm loving them still. Bright, vibrant, and legible. At night, they truly POP! 💥 *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@julianmontanez6635]

Nice video these look 🔥

[@DriveAndBeDriven]

Thanks! 💯 Glad you like them! I really love the sweet BRIGHT & VIBRANT colors they radiate. Much more high-quality than their price tag may suggest. I am definitely satisfied with this purchase. 🔥 *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@tennisjazz8169]

very clear, thank you.

[@siddiqahali9193]

This is so cool!

[@DriveAndBeDriven]

Oh yes! For sure! These door-mounted LED courtesy lights are super cool! Simple to install, and they boast an impressive vibrant presence at night. I'm still enjoying them to this day. Woot! Woot! Thanks for stopping by, Siddiqah! :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@hergettoseastutorial]

Sick!!! Will be getting them for my new Telluride

[@carbuff81]

I did this same thing in my Audi, except my application was a little more streamlined as my doors already had built in puddle lamps all I had to do was change out the stock housings with projector housings.

[@DriveAndBeDriven]

Indeed, Anthony! I recall you telling me about those awesome courtesy lights in your Audi Q3! Your install definitely looked more streamlined than mine, but then again your method is not universal. The ones I used in this video can be mounted on any car regardless of the presence of stock housings. I really love them still! So striking and vibrant at night. Undeniably, a lovely addition to my Veloster! Thanks again for everything, Anthony! Your support is truly appreciated! I actually have some SPECTACULAR news being announced over on Instagram. So, be sure to check that out once you get a chance! More to come, my friend! :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@julieaguero5488]

Absolutely great.

[@DriveAndBeDriven]

Thank you so much! All your comments truly mean a lot!!! Can't wait to share more with you. 😎 *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@khalidalsiyabi.]

Thank you so much bro

[@ameera0805]

thank you

[@Sassyautochick]

Very cool bro

[@DriveAndBeDriven]

I appreciate it, Dawn! Truly! Thanks for being a supportive friend. :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@SymbaChowChow]

Good informatioal video, I bought the same ones from Temu and the instructions came in chinese but 1 of my boxes came without the 2 tiny magnets is there anything I can use instead or do I need to order another pack ?

[@Spratlyk9]

Thanks for the review! It doesn't seem to have a solid bright color even during night time, or is it just the video? Is it bright enough?

[@SmallKat]

Fantastic video, not only was it extremely clear and helpful but you don't come across like a douchebag like so many other car guy videos :) u make me feel safer than my dad ever did working on my car!

[@MAZDA-ee7gx]

WOW..!!!So COOL but how about the BATTERY inside..?i means liked can be explore when sunshine and heat inside the car..?i hope can explain about it..TQ👍👏

[@christophersmith5536]

Thanks. Nice vid.

[@JerseyGirl0911]

Great video. My issue is, my car door comes too far in, the magnet can’t be placed to work properly.

[@greatrhyno520]

Thanks bro 🙏

[@Sassyautochick]

I never knew how easy this is to do.

[@julianmontanez6635]

Right

[@DriveAndBeDriven]

Absolutely! Same here! I thought it was too good to be true, but YES! It's that easy. #LovinIt :) *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@ste6000]

I saw this but the only thing i'd be on the fence about is having that sticking out in view. its nice not having to open your door and hardwire. Although installing in the door, hides it.

[@DriveAndBeDriven]

You're absolutely correct, Anthony!! These are definitely a bit more noticeable than the version that installs within the door panel, but the beauty about these is their rather low labor intensity, their low cost, and their impactful presence. The only compromise is needing to purchase batteries and having to look at the slightly bulbous box protruding from your door panel... I have to admit. It isn't as bad as it may seem in all honesty. Yes, it protrudes... But, I have never hit it with my foot, and it has never fell on the floor (nor has the magnet ever moved since installing over 7 months ago). It's definitely much more "durable" (to a certain extent) than I was expecting, and for the price, I'd say give it a try. :) Let me know how it works out for you!! 😁👍🏼 *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion!"_

[@amill1563]

I wonder if the door panel could be popped off and drill a hole on the bottom of the door so it would fit inside the door.

[@DriveAndBeDriven]

Yes! I'm sure that's a possibility. Although, I would had to test it out for it not to work. Also, these are battery operated... So, you'd have to remove the panel every time to change the batteries which can become a pain after a while. But, it'll definitely give the interior a cleaner more "OEM factory look". Once again, thanks for all your comments! They are really appreciated!!! *~DriveAndBeDriven* _"Fuel by Dreams, Driven by Passion"_

[@ste6000]

@@DriveAndBeDriven other problem would be triggering it. unless you cut an opening for the sensor plate, it might always be on or off.

[@DriveAndBeDriven]

Indeed! Figuring out how to trigger the light with the magnet would be another considerable concern if taking this approach. An additional hole would definitely be the most effective way to go about this... Good call, Anthony!! Luckily, I have seen many models of these lights that actually drill into the vehicle and operate via wiring. I didn't use those models because my main motive for this DIY mod was to make it as easy and inexpensive as possible. These lights definitely do the trick! 😁👍🏼 Nevertheless, I hope you enjoyed this video! Please subscribe for more awesome DIYs, car reviews, and auto comparisons coming very soon. Also, let me know if you have any questions or suggestions. I'm all ears!!! 🤓 *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion!"_

[@ste6000]

@@DriveAndBeDriven at that point if you're going to take the door off and drill holes in order to shine the light through your best bet is the hard wire it so you don't have to worry about the battery at all or the actual triggering mechanism. This device was purely to be used outside of taking the door apart something simple that did what you expect. And it does it well

[@DriveAndBeDriven]

Exactly! I agree. If you're going to go as far as making holes, you matter as well go all the way and hardwire the lights. It'll definitely be less labor in the long-term regarding battery swapping. I'd also solely use this unit on the exterior of door panels. Thanks again for all your comments, Anthony!!! Best wishes, and happy new year! *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion!"_

[@DMitriBailey]

Is there a better way to stick these came of after 2 days. Also does help that my door has n curve where i need to stick it so its not totally flushed

[@timothyallbee1176]

Very helpful

[@DriveAndBeDriven]

Awesome! Glad I could help. Let me know if you have any questions. Also, please remain subscribed for more DIY videos and car reviews coming very soon, Timothy. Happy holidays!! *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion!"_

[@Bjl1976]

I got a set of these and instead of magnets, mine came with infrared sensing stickers that seem to turn the light on when the sticker is against the unit and it turns off when the sticker is pulled away which seems opposite to what you are explaing.

[@henrysteinhauer1993]

If you hav textured material on you door pane they won’t stick on I have tried 4 different adhesives and none work, 3-m gorilla tape; super duty super glue take nothing works . Double back tape will not stick to a textured surface!!!!!! Save your money

[@donnaschicker388]

I cannot figure out how to you get to the clips you have to push in on back of device once its stuck on door in order to change the batteries

[@MotoMiles]

I am so frustrated the 3m didn’t stick. I prepped it .i tried job weld plastic and the clear plastic epoxy it keeps coming off..maybe it’s because i have a camaro might be a door clearance problem,. I’m thinking about maybe a bracket .

[@johnnykearney2286]

I just got some last week but when the door open is don't shine.I have to press the on button before I get out to get it to shine do I needd to get some new ones

[@bradenzz]

These look like they eventually fall off the door over time, is that true?

[@pennberdan2]

Can i use any magnet? I cant find the issued stock.

[@thegreat3943]

Will that 3m destroy the car door’s paint if you decide to take the lights off?

[@DriveAndBeDriven]

Hi there! That's a great question. I am currently unsure about that since I haven't removed them yet. For me, they're still working fine, so need for removal as of yet. I know that when I was installing it originally, I put them on and took them off at least 3 times to get the right positioning... When I did that, they never caused any damage to my door panels. But, that was within 1-2 minutes. I'm not quite sure what may happen now that I have had it installed for nearly a year. I appreciate you leaving this comment. Hopefully someone can help you with an answer if they've had them installed for a while (and attempted to remove them). Take care, and please subscribe if you found this video helpful. 👍🏼 *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion!"_

[@jimrohr2549]

I did manage to lose a couple of the small magnets that activate the on/off switch for the puddle lamps. Do you know where I can repair parts from the the manufacturer of this lamp?

[@SymbaChowChow]

One of my packs from Temu came without them did you find an alternative?

[@EAguapo]

How do i use the tape !

[@Boss_boks]

What tape did you use?

[@larrybrisbane2390]

Where can I buy it ?

[@trekkingmatt3181]

The projector unit looks a little bulky. Anyone who has these installed for a while, do you tend to knock them with your leg/foot when entering/exiting the car? How about the little magnet, anyone lost one of those yet? It seems like clothing or something could catch on the magnet and pull it off?

[@DriveAndBeDriven]

Hey there! Indeed. The unit is a bit on the bulky side, but for the price, it's a pretty solid deal! Also,, the fact that there are no wires and no drilling required totally sold me. I've had these installed for nearly 6 months, and I have never knocked them before... But, then again, I have a "coupe" so my doors are much larger than the average 4-door SUV or sedan. Also, the magnet has never fallen off, even on rainy days. The adhesive is very strong on both the light apparatus and the magnets. The only area you'll have to maintain is the batteries. I had to swap them out about 3 times already. But, only the driver's door, since the other doors are rarely opened on my car. Hope this information helps! Let me know if you have any more questions, and please remain subscribed for more awesome reviews and DIY videos coming soon! Take care, man! *~DriveAndBeDriven* _"Fueled by Dreams, Driven by Passion"_

[@K20IIIIIIIIIII]

Bro how u tape the thing to the door

[@timormoniqueparfaite2338]

Need to see someone do this when you have carpet on the door

[@spiroskaravias3377]

Mine can t stand always fall down 😢

[@djsthemetereman]

I got these but they just don't stick

[@trimeresuruspurpureomaculatus]

Mirip Yaris Joker.

[@GottiRC]

that looks very tacky, it would have been dope to have a more proper kit, kinda like what is stock on a mercedez benz.

[@dailyworld.5959]

This have different logo instead one

[@yvonnerodman536]

You didn’t show how to install it .

[@angelcasey3926]

That weak ass tape didn't stick to my door panels jajaja also on the G37 Sports the door panels stick out to far you would have to put that magnet on the carpet light wouldn't shut off when the door was closed.. Nice review but they don't work on every car. Seems if I want to install them I'm going to have to cut a whole in the cubby hole on the door panel and put them inside it🤦‍♂️ not super happy about that

[@sanjanasingh9046]

Same with my VW beetle. With the door closed, the light is still on, shining on the carpet.

[@darthraider4083]

@@sanjanasingh9046 I had 2 gorilla glue that magnet to the very edge, try that to see if it works for you.. Go to Ace hardware buy you some double sided velcro put your light on the door where u want it, close the door and hold the magnet to the bottom if it shuts off glue the magnet in that position..

[@sanjanasingh9046]

@@darthraider4083 Hello! Thanks for the tip. I realized that with the door closed, the magnet that was provided was completely hidden, even if i tried to place it as close to the edge as possible. And therefore, it was out of the pick-up range of the sensor. So i went to my local hardware shop, bought a larger and stronger magnet which i placed on the panel beside the seat rail and its close enough to the bottom of the projector and now the sensor picks up the magnet. I also got some stronger 3M tape and its all good now. REally, i think the magnets provided with the projector would eventually get kicked off - they're quite small. My new magnet is probably 3/4 inch squared and though visible, it's not an eye sore. Thanks again for the tip!

[@darthraider4083]

@@sanjanasingh9046 Yeah I had to Gorilla glue mine to the edge the tape provided on the magnets sucks for sure they dont stick.. And no worries at least you found a better solution to fixing it

[@jaybarrera1834]

I bet that shit falls off everytime you open and close the door

[@jmw0368]

Looks hideous! 😬