How To Interface Stepper Motor With LabVIEW.

[@vital2379]

you are crazy engineer man you ve been very helpfull much obliged

[@wna787]

Can you help me in this how to do step by step ? Build a temperature control system based on Lab VIEW and Arduino MCU, connect a temperature sensor to the Arduino unit, let the user define a three levels of control as following: - Level 1 if temperature is less than 22 °C, a green LED should be turned ON. - Level 2: if temperature is more than 22°C and less than 30°C, a fan should be turned on to 50% of its max speed. -Level 3: if temperature is more than 30°C and less than 38°C, the fan should work at 90% of its max speed. - Level 4: if the temperature exceeds 38°C then turn a Red LED ON and a 5V buzzer at a IkHz frequency. store the temperature values in a file with a rate of one reading each minute.

[@abbashaider8020]

IN CONNECTION DIAGRAM WHICH WIRE OF STEPER MOTOR NEED TO BE CONNECTED WITH COM AS I HAVE BIPOLAR MOTOR WITH 4 LEAD WIRE AND TWO OTHER WIRE FOR GND AND VOLTS.