Does the video show how to make the air screw mix screwdriver how much is video?
@HTMR9 ай бұрын
@@1goddarddr Full video: matthewmcrepair.gumroad.com/l/OrPk Buy the video, if it does not help you out, then ask for a refund.
@1goddarddr9 ай бұрын
@@HTMR good instructions thanks, Dave
@ryan.maccallum82136 ай бұрын
Did the rebuild kit you bought , come with a Is excellerator diagram ? Think my carb is leaking out of the excellerator rod ,
@riverrat61056 жыл бұрын
Good video kid but you give us a step by step of the easy stuff and fast forward through the disassembly of the carburetor 🤔
@munkyboye25853 жыл бұрын
Just got to the part that I came to see and was like WTF?!
@zunrue12 жыл бұрын
If you listened in the intro you would know why
@shawnkieper31424 ай бұрын
He wants you to buy the information
@davetimko4 жыл бұрын
Wtf. You fast forward over the parts I came to watch
@gcanaday1 Жыл бұрын
Selling the video on the website.
@trickym.m4466 Жыл бұрын
That’s bullshit
@IamCrvm3 жыл бұрын
Great job on fast forwarding through the rebuild process....
@donwolfjr12 жыл бұрын
It's all about the money!!! Lol...
@alexh.3977Ай бұрын
Watch the vid at x.25 speed
@meowmix21263 жыл бұрын
Why wouldn’t you focus your attention on the reason you posted this video? If someone is attempting to clean their carb then they should know how to get to it.
@jramsey845 ай бұрын
He literally passes up the information you need this is more about how to get to a carb than how to clean..don't waste your time
@garybutler4614 Жыл бұрын
Must have been awhile since you made this video you said a shop would charge 150 to do this! I checked they start at 120.00 an hour and you talking a 4 hour job !
@HTMR Жыл бұрын
Yikes!
@juanojeda29822 жыл бұрын
Makin money off u tube and tryna charge for a video wow cool for you
@manasesrivera81312 жыл бұрын
Wth man I need the actual rebuild process 🤡 thanks anyways
@wargasim238 жыл бұрын
thanks for trying. but all the stuff i wanted to learn (How to). you spead up the the video.
@HTMR8 жыл бұрын
That is because the full video is available for purchase only. This is a sample.
@man-vf1qm3 жыл бұрын
@@HTMR pretty gay ngl
@crashaxearmory7 жыл бұрын
Ya this video sucks, no explanation about how to remove the plastic parts before dipping in carb cleaner....
@HTMR7 жыл бұрын
The full video is over a hour long and can be purchased on my site.
@rebelwraith81385 жыл бұрын
Why did you fast forward through the rebuild part?
@DelcoTrash4 жыл бұрын
$$$
@Cherokee9134 жыл бұрын
He charges for the full video. Which is odd because there’s plenty of videos of this being done free of charge. Can’t knock the guy for it, but I can’t imagine he’s made too much off this method.
@donwolfjr12 жыл бұрын
This video is exactly what I was looking for and its fast forwarding through all the important stuff. SMH... Well... now I know why he fast forwarded all the important stuff in the video...its all about money with this guy apparently. For ONLY $25 bucks...lol. you PROBABLY get the regular speed video...Lol. Again...SMH... Nicely done...
@AngelusFromHell3 жыл бұрын
Thanks for the very useful video! Soon I'll try to clean my carb thank to this video. P.S.= do you know the original measurements (lenght, diameter and twist) of the stock handlebar bolts?
@kimgardner44646 жыл бұрын
Not sure why one would complain that a guy wants to earn a bit from the work involved in putting together this type of helpful video. Matt's biggest mistake is not telling the audience at the beginning: "This video can be purchased for $14. It will provide guidance for taking the carb off the bike, but at ___ minutes, it will jump to 4 times the speed. If you want to get the regular speed version, please consider paying the $14. I am just trying to cover my cost of putting together these videos." or something like that. Basically, give us a heads-up so we do not expect something and get surprised.
@HTMR6 жыл бұрын
Yes I started mentioning that in the first few seconds in newer vids
@curliecardenas6 жыл бұрын
first of all, some useful information on this video thanks. But I clicked on this video to learn a little bit about the carburetor because my bike is doing the exact same thing. And after 12 minutes you fast forward over the best and most important part.. so thanks but not a useful video for me
@HTMR6 жыл бұрын
This is a sample. Full video is available for purchase through link.
@saltsman-ss3ct3 жыл бұрын
I needed to see the part for cleaning it and it’s fast lol
@ELTECATE13SUR Жыл бұрын
Hello there I re did my carbs got bike running and everything but it's backfiring from carbs any help would really be appreciated
@lyingliar2 жыл бұрын
U rushed through the most important part of the video. The carb disassembly and reassembly
@jimdoherty8633 Жыл бұрын
Thank you for mentioning the vacuum leak at the end of the video and the fix, my bike had the same problem and now, thanks to your video I'm back on the road. Your help earned you a like and a new subscriber.
@bruceverdi26276 ай бұрын
Was the large tube on the carburetor that was called a vac tube actually the tube supplying the gasoline to the carb?
@stefdedoria5 жыл бұрын
hello !just a litle question please , why when i change my air filter (for a K.N filter) on this bike (vulcan 800) i have many problems whith carburetor after :small explosion when i roll slowlly she is wrong and problem for accelerate .........but when i ride fast the problem seems disappears... .........so sorry for my horrible langage and my bad translation ..........but Im french!! ...arf!.
@HTMR5 жыл бұрын
You introduced more airflow, and did not add any more fuel. So you are lean.
@Deadheadfishing3 жыл бұрын
If you’re gonna charge a fee to see the most needed portion, say so at the beginning so we don’t waste 10 minutes watching you do the easy crap.
@user-od7zz5uu3d3 жыл бұрын
The part you fast forwarded through was the part I needed to pay attention to....u should've fast forwarded through the removal process....not the actual cleaning method...smh🤦♂️
@HTMR3 жыл бұрын
Buy the full video: gum.co/OrPk
@brett77944 жыл бұрын
After u take off the air intake there is a plastic hand screw attached to a tube? Or cable? What does it do?
@KCDups5 ай бұрын
What does the tube wrapped in a spring on the bottom left of the carburetor go too?
@VENUSWR2 жыл бұрын
Service Manual is no more available. :(
@stephenwoods41752 жыл бұрын
Video is far too fast and you're not telling me what you're doing 👎
@1goddarddr9 ай бұрын
How do you access the air fuel mixture screw on the Kawasaki 800 it's really hard to get to in just about impossible when the engine is running without getting your hands
@HTMR9 ай бұрын
Buy a cheap screwdriver and cut/grind it to fit.
@412firefox4124 Жыл бұрын
Good start but tmwhats the deal with the 14 minutes of silence
@AndreiStabell-f2i4 ай бұрын
I wanna grasp how to balance the fuel on carbu , My 1999 classic is a real spender 🙄 I dunno wherever to locate it to balance .
The 3 différent tube behind the intake its for what???
@nynut5182 жыл бұрын
how many turns out from the idle screw on the Vulcan 800 classic the last guy who worked on it lost the washer and I just replaced it but don't know the original setting please help
@HTMR2 жыл бұрын
Just turn it in until it idles
@uredskivid Жыл бұрын
seven years ago $150 ? yeh maybe , now its 2023 and I would not do it for less than $300 + parts .
@HTMR Жыл бұрын
True that.
@dr.t178 Жыл бұрын
The important parts are shown in too fast mode and the easy parts slow.
@MrJesus-jp1zv6 жыл бұрын
The people bitching about a few bucks for the video can go ahead and pay the 150-200 at a shop to do it. Get your hands dirty.
@HTMR6 жыл бұрын
Thanks! My thoughts exactly!
@Mongoose118 Жыл бұрын
Taught me nothing about how to clean the carb!!!!
@codycampos39173 ай бұрын
Well… at least I know how to remove the carb… smh
@rtvanysaucedo9732 жыл бұрын
how can i contact i have my motorcycle kawasaki vulcan 1999 and it needs a cleaning do you have your workshop
@HTMR2 жыл бұрын
I'm in Chicago and not accepting service work.
@stevel49973 жыл бұрын
BS CLICKBAIT VIDEO WANTS YOU TO BUY THE SLOWED DOWN VERSION WHERE HE ACTUALLY SHOWS THE CARB REBUILD PROCESS.
@HTMR3 жыл бұрын
Cheaper than the dealer though just sayin'
@justintime29935 ай бұрын
Is there a way to unflood the carbs without taking them off the bike?
@HTMR5 ай бұрын
You can turn petcock off, and drain the float bowls. However make sure to check oil and see if any fuel migrated there.
@bellaitaliano80845 ай бұрын
Thanks for actual time on breaking it down but ffffffff forward putting the carburetor back together. 😵💫
@chargerinc86527 ай бұрын
Anyone know where u can purchase the rebuild kit thanks in advance
@HTMR7 ай бұрын
Just buy the OEM parts that you need.
@stefanie_m4666 жыл бұрын
i wonder if there is a abs kit available for these vn800 A and B.
@1goddarddr5 ай бұрын
The video was very helpful andl well done my 95 Vulcan. Idols good with choke on or off no more gas leaking out on my garage floor
@IaintTheHerb5 жыл бұрын
Buckle your helmet, dude!
@merlin1866 жыл бұрын
After seeing this it would be soooo worth 150 bucks to not have to fuck with this
@HTMR6 жыл бұрын
Shop will charge more than 150
@scottearls73403 жыл бұрын
Litterally time lapsed through every important part of the rebuild 🤦♂️smh
@georgewiley38505 жыл бұрын
A good mechanic at the shop is more than $150. But we use knowledge experience ultrasonic.I appreciate your mechanical aptitude. However Learn before teach or preach. pc.
@mymusicaccount14565 жыл бұрын
i forget how terrible that bike sounds with the baffles not drilled out........ wow. 1000 x better by removing them!
@willemvdeurzen95343 жыл бұрын
This week a shop billed me € 185 for this work. 35 on parts and 150 on labor/2.5 hours
@gosiamyrt86063 жыл бұрын
What is the correct fuel level in the carburetor? In the service manual it says that + -2mm above the upper edge of the float chamber. But it cannot be set like this. The float height is 16.5 mm + -2mm and with this setting the fuel level is below the edge of the chamber float.
@projectink3 жыл бұрын
No need to take all the bolts from the dash cluster just the bottom bolt
@floydhsivley33955 жыл бұрын
Has anyone run into a problem on the 09 vulcan vn1700 classic with the headlight and starter. My headlight quit working and now the starter won't engage. Battery is good this problem happened at the end of a ride.
@neilorange4112 Жыл бұрын
I know this video is old but there is a plastic 90 going to the bottom of the card is that the main supply line and its broke any ideas
@HTMR Жыл бұрын
They make a repair kit to replace with brass. Google cvk fuel inlet repair kit.
@neilorange4112 Жыл бұрын
@@HTMR so the old fitting will just come out with some force is there a o ring inside that I should repealed also I just bought this bike and it's been sitting for 8 year
@galwaytribesman92892 жыл бұрын
What's to stop someone disconnecting the speedometer and purtting up high miles and not registering it on the clock. I've wondered about this
@AJSenju Жыл бұрын
Panicked a bit when you had to pull those 10mm off the mount
@jaayreyes6923 Жыл бұрын
I have a ‘97 1500. Same process?
@HTMR Жыл бұрын
Very similiar.
@marshallmill55973 жыл бұрын
What are the lines coming out of the air box? Not the drain line but the other ones. I'm missing one of the bigger lines.
@krukimoto62962 жыл бұрын
I have a 2005 800cc. Do they have fuel pumps?
@benromero29374 ай бұрын
Kawasaki
@JesusEffingChrist Жыл бұрын
Needle nose*
@claytonhurst1329 Жыл бұрын
The tube you took off at 9:16 my bike doesnt have the hose connected to that, would that cause an issue??
@kaju6422 жыл бұрын
Is this a Classic? I noticed there are two different carb kits for the 800
@garynorman2499 Жыл бұрын
where can i purchase this whole video at
@HTMR Жыл бұрын
gum.co/OrPk
@dukesilver2019 Жыл бұрын
What happened to the clean and rebuild?
@HTMR Жыл бұрын
Full video: gum.co/OrPk
@raymondgraham75594 жыл бұрын
I purchased this video, and it's solid! but my email was deleted ... ?? anyone know how I can access the "unlimited full-length video" I purchased??? where's link?? I'd appreciate the help. Thanks!!
@HTMR4 жыл бұрын
I responded to your email.
@krukimoto6296 Жыл бұрын
Hey do you know the exact float height for the carb?
@B.D.TRX47 жыл бұрын
hope of all the motorcycles that I've had I hated the Vulcan 800 carburetor the float needle with stick all the time I replaced it rebuilt it. Here it was found that the fuel hose that feeds the fuel to the carburetor float Bowl but breaking down and that's what was actually clogging the needle so I installed a filter in line with the fuel hose
@janviernymotociclista.1025 жыл бұрын
Ola. Sou do Rio de Janeiro e meu carborador esta vazando por cima. Tenho uma vulcan classic 800 97. fiz reparos e não funcionou bem. Poderia me indicar qual vc usa na sua moto e medidas? Obrigada Janvierny
@kopynd17 жыл бұрын
mattthew, do you know if there is any ecu compatible to vn 800 211191438, cheer's r where can I find any info on compatible
@HTMR7 жыл бұрын
Sorry I don't know that info.
@kohlfonokalafi23653 жыл бұрын
So we took the carb off and cleaned it and everything. Put it back on and the idle is extremely high like how yours was but yours went back down. How exactly do I fix that
@HTMR3 жыл бұрын
Turn the idle screw CCW.
@JoseDaSilva-io1tn8 жыл бұрын
so when it got to the important part, video just speeds through without comment until end. what's up
@HTMR8 жыл бұрын
This youtube video is a sample. Complete 65min video is available for purchase here: www.howtomotorcyclerepair.com/vulcancarbclean/
@DelcoTrash4 жыл бұрын
Cost is $25 now. Must be working the supply/demand method.
@spelunkerd4 жыл бұрын
If the bike was stored with the petcock in the on or reserve position, then if you flooded the exhaust with fuel, the petcock must also be bad....
@brett77944 жыл бұрын
What would be the measures to take after this has happening? The bike is bogging then coming out to almost full power it was stored for 3 years two of which had non ethanol gas in it in the on position. Thanks
@spelunkerd4 жыл бұрын
@@brett7794 Carb cleaning and replacement with new fuel and a new fuel filter is simple and easy, though you may need a seal and gasket kit. Automatic petcocks, with a vacuum hose leading to the petcock (and no off position), should not leak at all with engine off when the petcock is left in the on or reserve position. You'll know when you remove the tank with fuel in it. The tank will keep dribbling out the petcock. Without tearing the bike down you won't recognize a leaking petcock unless the carb bowl needle is leaking, too. If the petcock leaks, the option is to clean the petcock, with or without a seal kit, or replace it. All of these are bread and butter jobs at a pro shop, they don't usually cost much and results should be better than amateur tinkering.
@brett77944 жыл бұрын
Thank you for you knowledge and time brother 👍 the shop near me gave a quote for 350-400 for a carb clean on my 02 Vulcan 800 that's why I was gonna do it myself but I'll probably mess something up
@Blueknight-il9nc4 жыл бұрын
spelunkerd Thank you for your knowledge when it comes to the Vulcan 800 I have an 03 classic. Your videos helped me tremendously.
@garretthall11926 жыл бұрын
need to no how to change water pump on a 85 Kawasaki 750 cruiser found everything but that need help !!!!
@HTMR6 жыл бұрын
I currently do not have a video on that.
@delrench47854 жыл бұрын
that was useless showed nothing about rebuild
@HTMR4 жыл бұрын
This shows it all gumroad.com/l/OrPk
@delrench47854 жыл бұрын
@@HTMR thanks ive already jumped in and just did it rejet and rebuild .....was pretty easy but did struggle a little with fuel set screw setting ....bike is running good ....thanks for your offer to help......it is app.
@mrsteakatron4 жыл бұрын
Is this the same carb as a 1996 1500 vulcan? It is doing the same thing, fuel goes into carb then comes straight out of overflow hose, bike has been sitting for along time. Cheers
@HTMR4 жыл бұрын
If it has a single carb, then yes.
@petreispir19522 жыл бұрын
Mulțumesc prietene pentru tutorial, am învățat ce aveam nevoie.👍🏍️
@clagrow4 жыл бұрын
I know this video is old but I just bought this bike and if you're looking at the carburetor straight on... the larger diameter hose that is connected to an inlet (or outlet) on the bottom left of the carburetor (on the front) where is that supposed to connect to?
@HTMR4 жыл бұрын
You'll have to email me a pic.
@freddysanchez13427 жыл бұрын
helpppp my 1999 drifter fuel injected starts when i put new spark plugs but after i turn it off it wont start and it keep injecting fuel that it floods the carb what cuold it be .....
@HTMR7 жыл бұрын
Freddy, I don't have much experience with FI.
@Reeseybaby9 жыл бұрын
kind of confused a little after you take the carb loose I don't see where you clean it. I see you just disassemble & reassemble it back together.
@moose649 жыл бұрын
So the only way to see the fast bits of the video is to pay $14?
@ScotsmanDougal5 жыл бұрын
Or you could take your bike to a mechanic and be charged quite a bit more than $14
@williambrown61198 жыл бұрын
Where are you located. And how much would you charge to fix mine. Same bike. Just a 97
@HTMR8 жыл бұрын
+William Brown NW burbs of Chicago.
@gmatthew29232 жыл бұрын
What is the item that he removed after the seat called? Mine doesn't seem to have one. It has two bolts holding it down and looks to be made of plastic.
@markallen87572 жыл бұрын
That's one of the air boxes
@erickgarcia4877 жыл бұрын
how many carb does this bike has cuz i have one just like it and took it to the shop for a carb rebuild and the tech guy says he has to rebuild both carb .. so far I know it has only one carb ?
@HTMR7 жыл бұрын
Just single carb on this model.
@pricenavy19706 жыл бұрын
That was stupid fast forwarding through the carb cleaning itself
@HTMR6 жыл бұрын
Sorry, the full video is available for purchase.
@crystalellis41574 жыл бұрын
Well damn u did step by step on how to remove the carb but u just zipped right through the important part
@HTMR4 жыл бұрын
Full video: gum.co/OrPk
@billvinord92825 жыл бұрын
Went to your site and signed up to get the manual. So far this morning it has not shown up in my email. Will check this afternoon.
@HTMR5 жыл бұрын
Email me here I will send it to you: www.howtomotorcyclerepair.com/contact/
@nicktrucks5 жыл бұрын
Why in one of the comments it says the video is $14 but at your web site it’s $25?
@HTMR5 жыл бұрын
That pricing was years ago.
@geraldarsenault30907 жыл бұрын
just got my 800 the plastic elbows that let fuel to carb and from are cracked and leaking can they be removed replace with an alternative.it runs really good paid 9oo for it going to fix up slowly but surely lol
@johnnymoore35984 жыл бұрын
u need a brass 90 inlet fitting to replace ur old stock one
@ericsmadis2 жыл бұрын
This is really good!
@eng06054 жыл бұрын
good video!!!
@j.r.cooper38366 жыл бұрын
I would like to rebuild the carb on my 2000 Vulcan 500. Do you think it is similar enough to the 800 that it would be worth buying the video?
@HTMR6 жыл бұрын
It would help, however you have a dual carb model.
@ryancastleberry36142 жыл бұрын
I’m dealing with a 98 Vulcan 800 how do we get watch the rebuild in slow motion
@HTMR2 жыл бұрын
howtomotorcyclerepair.com/vulcancarbclean/
@ryancastleberry36142 жыл бұрын
I bought ur video today rebuild just like u did I’m having trouble the bike at idle is trying to pull fuel through the needle jet while at idle
@HTMR2 жыл бұрын
@@ryancastleberry3614 Please email me for tech support. It is hard to respond here.
What is the air fuel adjustment set to I just rebuilt mine and I cannot get it to run without having the choke on
@HTMR3 жыл бұрын
kzbin.info/www/bejne/sJ6YnnVph52Imdk
@griffindegray58016 жыл бұрын
I followed your video and all clean starts and runs fine at idle but as soon as I move the throttle it dies I can’t get engine to even run above idle. ???
@HTMR6 жыл бұрын
Did you tune the fuel screw?
@michaelmartin78745 жыл бұрын
I’m a duck
@Torrejon134 Жыл бұрын
Bravo 👏
@TIMBHMAXX229 жыл бұрын
Hey, I have a 800 classic and had the fuel take painted and they painted the peacock and now the fuel in leaking thought the carb and exhaust I drained the carb and it looks like pink water so I think I have some paint residue in the carb, so what is the easiest way to clean /flush that out do I have to remove the carb to do that? Thanks for any advice, great videos ...
@HTMR9 жыл бұрын
+TIM HAYES Check the inside of tank for overspray (and water from wetsanding). I've had good luck using brake fluid to get rid of overspray...just be careful not to get it on new paint! Then flush your lines and tear your carb apart and clean it as well. I'd replace the float needle as this model seems to get stuck float more than others. Change oil also, the fuel definitely made into the crankcase as well.
@chrisweber35284 жыл бұрын
What is the black plastic box that was underneath the gas tank? I'm new to all of this and my 04 Vulcan does not have that black box under my gas tank.