An inexpensive way to secure loose hub caps to the vehicles rims. An easy to follow humorous tutorial directed and presented by Tommy Bob Thrasher.
Пікірлер: 140
@AudaciouslyDeluded5 жыл бұрын
"Get in closer to have a look at this Tom" - Tom proceeds to move an inch closer with the camera, leaving the viewer at distant shot. Damn it Tom.
@mea9235 жыл бұрын
😂😂😂😂😂😂😂😂
@eric66565 жыл бұрын
damn it tom you had one job to do.. xD
@goaheadtagmeIknowyoumadbitch3 жыл бұрын
Lmaooooo
@ethanwillis69709 ай бұрын
Tom's a bit of a goofball.
@sirrs59225 жыл бұрын
These are the type of videos we need on youtube!
@brianarsenault92815 жыл бұрын
I totally agree! Thank you SH7 for taking the time to watch, I hope the video was helpful.
@rrsp253 Жыл бұрын
drove around retracing my path for 1/2 an hour and found my hubcap. going to try this. thanks !
@brianarsenault9281 Жыл бұрын
Taking the little time you did to watch the video I'm sure will pay off. Thanks for your thoughts.
@vicd46203 жыл бұрын
I didn't think this would work, but it did!! Thank you.
@brianarsenault92813 жыл бұрын
Thank you for taking the time to share your good fortune! :)
@elizdevitz1103 жыл бұрын
So glad I saw this!! New one keep flying off!! I am glad that I was able to find each one LOL. Heading to Walmart now for the tape!! Thank you!!!!!!
@brianarsenault92813 жыл бұрын
Glad to see hear that it helped. Thanks for taking the time to valid Eliz : o )
@Vinlyguyx420x5 жыл бұрын
Thank you Brian and thank you Tom!
@brianarsenault92815 жыл бұрын
Thank you Vinlyguyx420x. It's always a pleasure in knowing that someone, like yourself, appreciates the time we spent putting the video together. I hope it helped. Please do subscribe for future videos. :o)
@rangerjoe26356 жыл бұрын
THANK YOU BUDDY FOR THE GREAT TIPS.
@brianarsenault92814 жыл бұрын
Thank you Ranger Joe for your interest : o )
@daniellaswell12475 жыл бұрын
Thank you very much it worked
@jimmyoalfaro7 жыл бұрын
You're my hero! Thanks for this very useful tip!
@brianarsenault92817 жыл бұрын
Thank you for saying Jim. We appreciate you taking the time to watch the video :)
@brianarsenault92816 жыл бұрын
Our pleasure! Thanks for taking the time to stop by.
@anthonystallcup23702 жыл бұрын
Thanks guys
@RKS847 жыл бұрын
great job guys very informative 👍
@brianarsenault92816 жыл бұрын
Thank you Rahel for your validation.
@garylandau94165 жыл бұрын
Thank you. It worked great. You guys saved me after losing two in the same day.
@jeremiahsosa39575 жыл бұрын
You guys are funny and informative! Haha
@brianarsenault92814 жыл бұрын
It's always nice to get some feed back, thank you for your validation : o )
@brentcray55185 жыл бұрын
Thank You, very informative. I just bought some & all them fell off. Im going to bye another set an try this☺👍
@brianarsenault92815 жыл бұрын
Thanks Brent for taking the time to validate whats been presented.
@allisonself92105 жыл бұрын
Thanks for the video!
@brianarsenault92813 жыл бұрын
Thank you Anne ... were glad we could help out.
@dustcircle2 жыл бұрын
Thanks for the recap, Tom :D
@brianarsenault9281 Жыл бұрын
My pleasure!
@mujaheedkhan9592 жыл бұрын
"snug as a bug on a rug"
@thechriscollection99836 жыл бұрын
Those aftermarket wheel covers which is shown have two slots on the clips for the retention ring. The very top slot where the ring goes is for a slightly larger rim, if one puts the ring in the lower slot, the ring gives more tension on the clips...if not enough, take the retention ring and straighten it a bit where it bends for the valve stem. That will make the circumference of the ring that little much more, and once installed on the wheelcover, will put that much more outward pressure on the clips, making it fit very tightly.
@brianarsenault92816 жыл бұрын
I'll certainly check this out. Thank you for the comment Chris
@Hubcaps2195 жыл бұрын
yes that works too.
@rpc717 Жыл бұрын
I alternated mine - bottom notch on the two next to the valve stem and every other one going around. Snug as a bug now!
@earthbarnes66943 жыл бұрын
Great advice....i give this a 10
@brianarsenault92813 жыл бұрын
Thank you John! Glad you could see its potential : o )
@TormentaEV2 жыл бұрын
This is a funny video . You can tell he gets mad after the other guy tells him to point at the wheel
@freetheport Жыл бұрын
Thank you
@majorleaguebarberstyling84512 жыл бұрын
Thank You Works GREAT !!
@brianarsenault92812 жыл бұрын
Thank you, it makes it all worth it to get a nice compliment like this : o )
@Lt.Dan_2 жыл бұрын
Took a long time but oh boy definitely works
@jbsbayarea18 жыл бұрын
good tips, thanks
@brianarsenault92816 жыл бұрын
Thank you for taking the time to leave a comment.
@boydmerriman Жыл бұрын
I learned two things here, tape and an extra notched pointed out by a few here! Thanx!
@brianarsenault9281 Жыл бұрын
Glad it was helpful!
@NuclearShot Жыл бұрын
that is one gigantic center cap
@corinne676 жыл бұрын
Thank you!
@brianarsenault92814 жыл бұрын
Thanks for your interest!
@griselp6772 жыл бұрын
Thanks so much! So helpful! Who would of thought of tape 😁
@kimberlysmith4413 Жыл бұрын
Thanks guys good to now I'm putting them on right this time...
@brianarsenault9281 Жыл бұрын
Glad to see you took the time to watch. Keep us posted and let us know your results : o )
@madman79232 жыл бұрын
hes like the bob ross of hub caps. you rock dude.
@brianarsenault92812 жыл бұрын
: o ) LOL!
@rdennis776 жыл бұрын
Seems like a great tip! Thanks! As a side note: the video would have been easier to watch if it had been filmed horizontally instead of vertically. (I felt a bit like I was watching somebody work inside of a closet.)
@brianarsenault92816 жыл бұрын
We realized after making the video that a horizontal (landscape) view would have been much better. Thank you Rich for taking the time to view the video and provide us with your input.
@alonzowitt59312 жыл бұрын
Grip tape for baseball bats ect works great!
@jpaullino11 ай бұрын
Already lost 2 on the highway. 😅Thanks for the video!!! 👍
@brianarsenault928111 ай бұрын
Thanks for the validation : o )
@jimmytorpedo66902 жыл бұрын
This helped! Thanks yawl!
@brianarsenault92812 жыл бұрын
Thanks for letting us know : o )
@GhostGL3 жыл бұрын
Seems like a better idea then another video where they put tape in one spot just around the ring.
@brianarsenault92813 жыл бұрын
Thanks Mister Ghost for your time taken to leave a comment. It's amazing just how much more tighter the ring will fit if a little more tape is placed statically around the ring.
@asid7316 ай бұрын
I like how Canadians say eouwt for out
@markymark40492 жыл бұрын
Wow you and Brian are so rock and roll up there on location in Canada ;-)
@brianarsenault92812 жыл бұрын
Sometimes a good swig of whiskey will get your innards pumped and the next thing you know your doing You tube videos about hub caps falling off.
@tadeuszgoralik50476 жыл бұрын
. . instead of using tape i used 1 inch pieces of rubber hose cut along center and snoop on steel holder . .. work perfectly and is more durable than tape . ..
@brianarsenault92814 жыл бұрын
That's a good tip.
@randrrr21936 жыл бұрын
Thank you! In Canada and a Texan accent. LOL
@brianarsenault92813 жыл бұрын
You're welcome! As Tommy-bob often says, " keep those hub caps a rolling ... eh!"
@nxtBlake2 жыл бұрын
lollllollll i’m subscribing good video
@THENBXA3 жыл бұрын
Thanks!exactly what I was looking for!!💪🏿💪🏿🤜🏿🤛🏿
@brianarsenault92813 жыл бұрын
Glad I could help, hub caps can be expensive : o )
@interstategar2 жыл бұрын
The car builders are probably laughing their ass off since they purposely figured out way for consumers to buy additional hubcaps after they sell you the vehicle. What is needed is an aftermarket wheel that doesn't need a hubcap.
@puppiesarecute78162 жыл бұрын
I can't see your video very well because of the direction you filmed with your camera.
@BrioaZ4 жыл бұрын
What kind of tape is that? Electrical black tape?
@brianarsenault92814 жыл бұрын
Hello Bri Hennessey; It's electrical black tape, the type you would use to make a tape enclosure around an electrical wire. It's found at any electrical supply store or hardware.retail.
@trinbryant55575 жыл бұрын
I found this video to be cute
@brianarsenault92814 жыл бұрын
Thank you Trinika Bryant for your kind words.
@goaheadtagmeIknowyoumadbitch3 жыл бұрын
Cute? Wtf
@jay.06216 жыл бұрын
So,what do you guys think of the minimum wage hike in Ontario?
@brianarsenault92816 жыл бұрын
Let's put it this way Mister Jaime, if you turn a blind eye to loose hubcaps, eventually there gonna fall off. Wouldn't it be best to take the steps and secure them before that happens? When I put forth your question to Tommy-Bob, he says there's a simple solution to all this, either you move on to a better paying job or crack open the piggy bank and get yourself good quality hubcaps. In the meantime, if you got trouble with squirrels getting into your attic; don't you fret none, Tommy-Bob is a squirrel whisper and he knows what to do. kzbin.info/www/bejne/l6SXgWuiZ76pqbs
@Kitkat-uq5gj3 жыл бұрын
what tape were you guys using?
@brianarsenault92813 жыл бұрын
Hi Geranimo thanks for taking the time to watch; Black electrical tape. I'm told black friction tape works as well : o )
@brucey396 жыл бұрын
I settled for simile colored cable ties .
@brianarsenault92816 жыл бұрын
As long as it holds tight the hub cap ring to the rim, success is imminent. A good suggestion to try cable ties, I'll have to give it a try.
@mikepeugeot73444 жыл бұрын
Yes this is definately an effective way to reduce them to fall off. Theres always a chance that they could fall off no matter how hard u try to make them stay on
@brianarsenault92813 жыл бұрын
An ounce of prevention is worth a pound of cure
@mikedollinger6132 Жыл бұрын
Thank You so much because i have had to replace hubcaps & even at $60.00 it becomes costly.
@brianarsenault9281 Жыл бұрын
Your welcome Mike, getting that tight fit is crucial to keeping that hub cap secured. I'm glad to see you found the video useful : o )
@idc92446 жыл бұрын
Does that trick work on center caps?
@brianarsenault92816 жыл бұрын
Not sure without knowing what were working with, it certainly wouldn't hurt to try.
@Hubcaps2195 жыл бұрын
if the center cap has a ring in it, yes. if not, wrap the clips on your center cap in tape and it should work.
@stephenrodriguez57094 жыл бұрын
To keep your hub caps from falling off, clean the wire ring and the clips that the ring secure to on the hub cap, take Gorilla Glue or some other good adhesive and apply a thin bead of glue to each of the mounting locations let the glue dry completely for a day or two before putting the hub caps back onto the rim the ring will remain stationary and the cap won't come off the rim.
@brianarsenault92814 жыл бұрын
A good tip if you have all the plastic mounting clips. Thank you for taking the time to share it. As a precaution, when applying adhesive to the mounting clip, be mindful that the clip needs to have some flexibility, if it becomes too rigid, the additional stress at the base of the clips could subject them to break off.
@stephenrodriguez57094 жыл бұрын
@@brianarsenault9281 Sir, I totally agree with you.
@1scrapper152 жыл бұрын
Wish you would of videod putting on the tape. I guess duck tape is what your using. Do all lug hubcaps have retention rings? Anyone
@brianarsenault92812 жыл бұрын
Hello Lisa, we used black electrical tape. You can use any kind of tape that will build up the edge of the gripper to provide a tighter grip to the rim.
@1scrapper152 жыл бұрын
@@brianarsenault9281 thank you very much✔️
@Mookiethedog6 жыл бұрын
Usually I try to find videos with hot chicks in them to teach me about car stuff but you two guys were entertaining
@brianarsenault92816 жыл бұрын
Blaaaaaa! good one! Thanks Milomia for taking the time to stop on by.
@Mookiethedog6 жыл бұрын
I should add I did what you guys told me and my hubcap hasn't fallen off since!
@brianarsenault92816 жыл бұрын
Thank you for your feed back Milomia! It really does help when you consider what you would spend in dollar value for replacing all four hubcaps just for cosmetic reasons. It's a complete waste of money. As a point of interest, if you ever do loose a hub cap and can't locate it, but are lucky enough to have two other hub caps with a different cosmetic look fitting your rim circumference, then remember what people view on one side of your car is not determined by what they see on the other side. In conclusion, you can have two pairs cosmetically different from one another and be rest assured that the viewer does not see the difference, due to their viewing perspective.
@FeedmeJUice5 жыл бұрын
Lol so cute
@hernandezfamily84986 жыл бұрын
If I lose my hubcap because of this!!! I'll just remove them all!!!
@brianarsenault92816 жыл бұрын
I think your contingency plan is a great idea! As a suggestion, paint all your rims with a flat black spray paint. You must first clean the rims of all grease, dirt and grime. if the rims were previously painted with a high gloss paint, I would suggest that you use a fine steel wool to roughen up the high gloss surface before repainting. After the prep work has been completed, when painting be careful of overspray. For future paint touch ups to the rims, revisit these notes..
@johnoh1667 Жыл бұрын
A GOOD TRY,.Its certainly a lack of friction where the tabs contact the inside wheel rim. A three of pieces of waterproof emery paper overhanging the small rounded tabs, glued into place using plastic cement or similar, plus your fix will do it. The emery paper is usually enough to make it thicker to hold it in place better also. The wire adjustment might not be needed. After all its mainly a lack of friction on the inside rim that causes it to rotate and fall off. All tabs could be treated that way!
@brianarsenault9281 Жыл бұрын
John I'd like to correct you to your following remark, " it's a good try, " my tutorial is a good solution to a problem that exists with most hubcaps. The tutorial helps prevent hub caps from coming off. Your idea of glueing on waterproof emery is another possible solution. I personally wouldn't remove the ring, as the plastic tabs age they will eventually become brittle and break, making it imperative to keep the ring aligned for support. Thank you for your thoughts.
@michaelpalmer9375 жыл бұрын
Well done, a jolly jumbuck for that guys, English Mik
@Michelle-iq6wu6 жыл бұрын
if you look at a profession video regarding putting hub caps on you will see that these guys have the ring on the outside of the clips but they should be on the inside and the ring should be with the notch the opposite way by the valve stem. If you do this way the hub caps go on secured. I tried putting mine on like they have the ring and found the same problem they did. Watched the video of a professional and they went on properly
@brianarsenault92816 жыл бұрын
Dear Michelle, you need to view the tutorial again to verify what your saying. The ring on the hub cap was never removed, it's still in the same position as how the manufacturer originally positioned it, meaning the ring has never been tampered with. Nor does it state anywhere in the above tutorial to remove or reposition the ring. The video is putting forth a suggestion only to strengthen existing support clips (found on the hubcap body) a solution that shims (tape) the retainer clips for better adhesion and gripping power when fixed to the rim.
@blueisnotgreen72585 жыл бұрын
There’s a bear with you!?
@keen2b3 жыл бұрын
I always buy Ford's there wheel trims never come off!!!
@lindsaynicole12183 жыл бұрын
Tom was forced out of his room from playing video games. He’s not interested.
@zaccambronero80763 жыл бұрын
I use double sided tape...
@justinanderson87587 жыл бұрын
No one listen i will find it I will keep it I make videos of me finding and collecting driver's misfortunes
@brianarsenault92817 жыл бұрын
Smart!
@finncone47157 жыл бұрын
LOL!
@hackendorf7 жыл бұрын
It´s better using DUCK TAPE
@brianarsenault92817 жыл бұрын
I think using Duct tape also makes a good alternative
@AllPro7776 жыл бұрын
Duck? DUCK? Oh boy...
@goaheadtagmeIknowyoumadbitch3 жыл бұрын
@@AllPro777 🤣
@newshades7009 Жыл бұрын
a zip tie will keep them from coming off also
@brianarsenault9281 Жыл бұрын
Thank your for your input. No doubt it's a temporary fix, (an alternative Band-Aid), but unfortunately the tie wrap becomes an obvious eye sore. Keep in mind, the hub cap brings an overall aesthetic look to the steel rim.
@michaelbenenson2 жыл бұрын
Camera work far too aloof.
@kristinlee94854 жыл бұрын
.....OR you can save an entire day and simply buy new ones for under $100
@brianarsenault92814 жыл бұрын
Thanks for watching Kristin Lee. Just think what you could purchase with $100 + . When faced with a problem, such as losing hub caps , often taking a few minutes to learn a trick or two can be very rewarding.
@lauriehaley8591 Жыл бұрын
10 min max good try lol
@tincanboat6 жыл бұрын
better solution.....move to florida we don't have too keep changing our tires in the winter....and lots of other advantages.
@brianarsenault92816 жыл бұрын
That is the ultimate solution. Thanks for watching