I absolutely love this product! It has made my life so much easier.
@clarkbarkev Жыл бұрын
Beautiful product. I am a florist that does lasering and sublimination in my sympathy business. I now have a new product to play around with. Very pleased with what I turned out. And yes remove both sides of the plastic!
@clarkbarkev Жыл бұрын
And I also am having a problem with back side. A masking would be much better!
@sebastiansaez51552 жыл бұрын
Ive just finished making 100 keychains with this product. Whe film on the clear side is a nightmare to remove, a masking tape woulve been better and more eco friendly. Besides that really happy with the results
@Ricks2Cents Жыл бұрын
I need to Try this!!!
@Craftybowladychannel2 жыл бұрын
I have an acrylic sheet that is the same on both sides. There is film on both sides to peel off. Trying to sublimate Graduation pictures on it. It is an Optix brand acrylic sheet and is .093 thickness.
@dickebk2 жыл бұрын
This is great as now I dont have to go through the trouble of spraying clear acrylic with white paint after sublimating! Hmm so on that updated link while viewing on my smartphones screen I only see you have 12x24. Do you not provide smaller dimensions for hobby machines or did I not see another size option?
@JDSINDUSTRIES2 жыл бұрын
We only sell this sheet stock in the 12x24 size. Sorry!
@dickebk2 жыл бұрын
@@JDSINDUSTRIES yes I talked to a rep on the phone about it. Well hope its popular enough for you to think about the broad customer base that has hobby laser machines with smaller sized beds instead of just pro machines. The rep said you could cut it smaller for a charge
@bartp277723 ай бұрын
Why is mine not coming out shiny? I am using the right side and I am taking off the film..
@JDSINDUSTRIES3 ай бұрын
Give our sublimation specialists a call! They'll ask some more questions about the results you are getting and walk you through some troubleshooting steps. 855.782.4657
@designdistrictstudios8 ай бұрын
if you put an LED light at the back of the finished sublimated acrylic, would it glow like an LED signage and light would pass through?
@JDSINDUSTRIES8 ай бұрын
They are transparent and will show light through the piece!
@leahdax11 ай бұрын
Looks promising. The details page says that it's extruded acrylic. Is this accurate? Extruded acrylic smells very bad and the odor lingers on the acrylic for a long time. My laser is in my home. This might be a deal breaker for me.
@JDSINDUSTRIES10 ай бұрын
It is extruded acrylic!
@owensbuilt8 ай бұрын
Could you do this with a photo?
@JDSINDUSTRIES8 ай бұрын
You could create anything that can be printed on your sublimation printer!
@priscilalovely9 ай бұрын
What would the settings be for the glowforge ?
@JDSINDUSTRIES9 ай бұрын
We do not have a glowforge in-house to test and give exact settings. We do have a Facebook group with users that do have glowforges! You may be able to find some information there! facebook.com/groups/jdslaser
@leewoods7831 Жыл бұрын
What settings would you use for Trotec Speedy 300 80watt?
@JDSINDUSTRIES Жыл бұрын
100 power, .65 speed, and 1000hz!
@emem7494 Жыл бұрын
After sublimate clear cast acrylic, even cleaning with water and soap the acrylic isn't clear as before. Some part is frosty and hazed, is it normal??
@JDSINDUSTRIES Жыл бұрын
This doesn't sound right. If you give our sublimation team a call at 855.782.4657, they will walk you through sending them a picture to diagnose this issue!
@jessicalane107 Жыл бұрын
Are we supposed to remove BOTH sides of the plastic film before pressing? I removed both sides and still don't have a nice look. The colors seem pretty spot on but it just has a matte look, it's hard to explain. I followed the steps accordingly. Heavy pressure caused the material to flatten out slightly and lose its shape. Not sure what to do.
@JDSINDUSTRIES Жыл бұрын
Yes. The film should be removed before sublimating. It might be easier to troubleshoot with our sublimation specialists over the phone. You can reach them at 855.782.4657. Hope we can get this figured out!
@cheryll6232 Жыл бұрын
Saw the video when I went on the webpage. Under that product # you gave above (SAC1224) it says under the details it is not laserable. So is that the right #?
@JDSINDUSTRIES Жыл бұрын
That is correct! This product is not laser engraveable. This item is able to be cut with a laser, however. Which you will see that spec 3 listings below the "laserable" sepcification. Hope this helps clear up some confusion!
@fatisummer9106 Жыл бұрын
How do I know if my Acrylic sheet can sublimate (I brought them ages ago ) and if they do is there any coating that I can use to make them sublimate
@JDSINDUSTRIES Жыл бұрын
Unfortunately, the only way you would know for sure is knowing the name of the product. There is a coating called Subli Glaze that might work for you! Hope this helps!
@toddltomlinson2 жыл бұрын
@jds can you post a link to the product you were using?
@JDSINDUSTRIES2 жыл бұрын
The acrylic sheet stock we used can be found here: bit.ly/3JRNAnW Thank you!
@jenna225 Жыл бұрын
Would be helpful to know the part number.
@JDSINDUSTRIES Жыл бұрын
There is a link directly to the product and part number listed in the video description for your convenience! Part number SAC1224.
@elburrona Жыл бұрын
Hi! highly interested.. how can I buy one and whats the cost?
@JDSINDUSTRIES Жыл бұрын
You can view this product here: bit.ly/3JRNAnW To purchase, you will need to be a JDS customer. You can sign up here: bit.ly/3MSXBnu Hope this helps!
@THEHOAXHUNTER Жыл бұрын
ordinary acrylic or sublumation ready??
@JDSINDUSTRIES Жыл бұрын
This acrylic has a sublimation coating!
@tampajeeper Жыл бұрын
What are the settings for Diode lasers
@JDSINDUSTRIES Жыл бұрын
Unfortunately, we do not have a diode laser on hand to test and provide those settings!
@rockjano2 жыл бұрын
Very cool...where can I get this type of acryl???
@JDSINDUSTRIES2 жыл бұрын
You can find this acrylic sheet stock here: bit.ly/3JRNAnW Thank you!
@user-rd4hp5lu7y Жыл бұрын
Any offset for cutting?
@JDSINDUSTRIES Жыл бұрын
No offset!
@chrislansaw94912 жыл бұрын
what laser cutter did you use? Does JDS offer this cutter?
@JDSINDUSTRIES2 жыл бұрын
We used a Trotec Speedy 360 80W laser to cut this acrylic! We do not sell the laser.
@sebastiansaez51552 жыл бұрын
Can I sublimate and then cut?
@JDSINDUSTRIES2 жыл бұрын
You could. But you would run the risk of burns from your laser as you would take that protective plastic off to sublimate. Hope this helps! Our fabrication team would be happy to walk you through any questions that might come up. 855.537.2228.
@adamsmith5592 жыл бұрын
How are people using these?
@JDSINDUSTRIES2 жыл бұрын
We've been hearing people use these for a large variety of things. Graduation display pieces, coasters, ornaments, informational signage and more!
@rosenar25592 жыл бұрын
Great! is there another link for the "sublimatable acrylic sheet stock" the link takes you to acrylic that is not sublimatable? Thanks
@JDSINDUSTRIES2 жыл бұрын
I'm sorry! You are absolutely right. This should be the correct link: bit.ly/3JRNAnW
@dalethomas84442 жыл бұрын
I did not know that you leave the plastic on when Lasering.
@dickebk2 жыл бұрын
@@dalethomas8444 yeah every other company that sells acrylic and demos laser vector cutting says to take off their coated protection sheet. I would want to test that as it might leave a burn residue along the edges of the acrylic. I know you cant use alcohol on acrylic for cleaning as it produces micro cracks. not sure how to get off the burn residue
@devfailla90722 жыл бұрын
JDS Industries I am not able to order from your website! 😢
@JDSINDUSTRIES2 жыл бұрын
@@devfailla9072 Sorry that the website is giving you troubles. Our customer service team is always happy to take your call if you would like to place your order that way! 800.843.8853