How to lift your crown Vic for 24’s or 26’s((Best and cheapest way))

I used coil spring off F-150 and -f250.... f250 in front so the engine weight don’t drag it down ... I can turn and all ... also make sure u get the correct offset wheels to fit your vehicle

[@kaydeeann2956]

Idk about dodge but on a Chevy you can use the springs and spindles from an s10 to put on the goody cars to lift them up. Only mentioning because it’s knowledge for everyone

[@leonjefferson7048]

I needa know what i can do for my 98 buick lesabre limited

[@danielrobinson4049]

I got a 2000 crown Vic I’m ready jack up.. this a dope video bro

[@johnjolly1663]

Thank you man !!!! So for my 96 mercury I put 96 f150 coils n shocks on the front And F250 coil n shocks on the back

[@chrisgivens5718]

Do the control arm touch the spring or should I just change them out as well

[@whitelavarball]

I've got a 99 on 26s with universal lifts spacer cups which have worked perfectly but I need new shocks and was told to get some new ones from an F150 which have almost 5 more inches of extension that the Marquis

[@dohara241]

Good video mane, cuz I got 2005 crown vic on 26's with the cheap ass coil springs I bought it like that it ride terrible on bumps in the country smh.. good video ima get my shit right now👌🏾👌🏾👌🏾

[@skipbeef5547]

Thank you. I have been looking into lifting my 06 and I didn’t want to buy a spacer kit. I figured you could interchange some parts with f150 but didn’t think about 250s

[@jermaineflowers9906]

I used front coils off a heavy duty police car a caprice them I used coils off a 2001 Vic police interceptor

[@jaygbandz8091]

you helped a lot, i'm going to lift my 99 MGM.

[@therealflamelit]

got a 02 Crown on 4's just sitting around in my yard lol

[@whitelavarball]

Wanna sell?

[@daplincoln]

You dont have to get the control arms till u get 30s or mess with the frame notching. I had 28s with just liftin cups in the rear the front i had the lil knuckles

[@whitelavarball]

I have 26s with universal lifts cups and they work perfectly I'm working on the shocks from an F150 which have more extension

[@_-Miami-Vice-_]

We dont care what is the size of wheels but this car need to be stanced à little for me ...

[@donavencaudill3763]

Yo.....I fucking. Love the simplicity of this video g. You know how long I've been tryna save a few bucks but not ruin my ride bro same year I have. Right here and now I know springs and struts of a 250 I'm so fucking happy rn but do I need to do the control arm??

[@landocalrissian2141]

You mentioned the control arms needing to be swapped out which ones do I swap them with? Don't really wanna cut the frame.

[@vesterslife8414]

Good advice

[@Lowkeysav912]

I have a crown Vic Victoria LX 92. What kind of shocks and struts do I need for the rear and front?

[@whitelavarball]

Get some from an F150

[@xx_Mr_IQ_xx]

Good vid 👌

[@imserious2187]

Does it make the ride a little rougher over bumps?

[@user-oz6ch1vr6l]

When you change out the control arms for 26$ are you getting them off the f250 and using them?

[@whitelavarball]

Great question

[@MrGoalminded]

hey brother for a 2011 crown vic police interceptor would those be still good if i got them from a 2011 f150 or f250?

[@FATMAC_365]

What exactly do I need for front and back to lift my 2003 crown Vic I just wanna be clear thanks

[@kamronkr1]

Good look bro

[@bholland7796]

I have a 97 Grand Marquis I wanna lift it so I should get the front off a 97 f150 and rear off 97 f250

[@DeeMoneyG]

How did u lift the front

[@vincenthoffman3044]

U say f250 in rear, in this video. Just wanna double check that it is indeed F150 upfront? 250 in rear? Or vice versa

[@trinizionblount]

I got a 2004 grand marquis. What should I get!!

[@evidentlowkey7007]

I have a 92 Crown Victoria LX so I need to go with the 92 fl50&f250 truck?

[@BigGroovyOg]

Did you go with 1996 Ford F-250 shocks as well?

[@Mykstayactinup247]

So can I use the Control arm from a truck too?🤔 please help

[@jasonboisclair5682]

Did you have to use the shocks in coils from the truck or just the Springs

[@Mr.How2Hemi]

Both

[@kahlil480]

Can i do everything u said with my 99 Lincoln Town car?

[@raybronco7731]

Does ur air suspension light come on when u lifted it?

[@trey-tjackson8106]

Can you do a video to lift new cars kia/Hyundai

[@looneytunezmontoya9298]

What did you put in the front

[@mauriceking5149]

Will it work on a Buick lesabre custom 2003?

[@da-gangvlogs1441]

If you fuckin with the vic shit come check out mine!! Shes under construction for the second time on 6's trust me you want be disappointed 💪🏽I post a new video weekly!!

[@atl735]

So 98 crown Vic lx 98 f150 springs and shocks for 31 in muds

[@timchavis9420]

Thanks my boys think im about to allow that cheap stuff from Auto zone on my car Hell no thanks Big Bru!

[@arlingtonsmith8305]

How can I get the front higher then the back

[@Mr.How2Hemi]

Arlington Smith just cut the spring to the length you want ... but make sure your rim offset is for your car or you will scrub

[@dohara241]

One question? Do I need f-150 struts &coils for the front & struts &coils for the back to??

[@Mr.How2Hemi]

Redd 400 f250 in the front f150 in the back

[@sanntitus7834]

Jj Mccormick I have a 2008 do I need to change the control arms

[@dohara241]

Ok so Front F150 AND front F25O shocks and springs ???

[@juanlira6041]

Will it work on my 97 town car?

[@marcmartin224]

I got a 2010 grand Marquis with air ride (factory) I want 24”s. Do I have to lift it? And if I do this will the air ride go crazy? Any advice would be appreciated. Rim shops telling me all kinds of conflicting information. Thanks.

[@rossharrell1766]

I am currently trying to figure this out myself, I believe what happens is the air ride is removed completely from the car and then you are have to add shocks & coils (complete swap job) and then you are adding lift spacers/cups. So the ride will most certainly change, but maybe not for the worst. I need more information as well.

[@bigjonb6778]

Is there a kit that you can get that has everything for 26s on a 2001 mercury grand marquis?

[@johncarter349]

Lifta brand website

[@glenview2142]

So I would need 4 f150 front shocks and springs to lift my grand marquis

[@MRHEEMSTER]

I’m trying find out now I need em done like ASAP

[@0.pgamng]

@@MRHEEMSTER following

[@BroadRokkBaby]

💯💪🏾

[@thatguynamepopp6585]

Yoo bro was on the front again and can u show it??

[@Mr.How2Hemi]

that guy name pop p f250 front f150 back

[@thatguynamepopp6585]

Jj Mccormick shit I just grab a 3 kit from left a brand came with cups and Struck adapters

[@ScrewedUp915]

So you took off leaf springs and put them on ur vic?

[@Mr.How2Hemi]

Shocks

[@bankbrozolliano1968]

Would this work for a 2003 Grand marques?

[@Mr.How2Hemi]

Yes

[@rickyp5164]

So u have F150 strut towers on the front? I got an 04 merc and its higher in the back . I want the car to level out.

[@Mr.How2Hemi]

Rick 85 f250 in the front ... F150 in the back so it wont be stiff

[@rickyp5164]

I got the same issue. What year for the F250 struts do you use for the front? I have a 04 merc.

[@brysoneastes8704]

Eyy rick how did it turn out im bout to throw 4s on my 04 as well

[@artiscooper5384]

I want to lift my 97 p 71

[@FATMAC_365]

Has anybody done this to their car?

[@28mafiapaintball83]

I'm in the process of doing this now

[@28mafiapaintball83]

I have a 2007 crown Vic and u have to get the 1996 to 2000 shocks and struts cuz the 2007 front shocks off a F-150 are to big to fit my crown vic working in the back next will give a update on how that goes

[@gustavofernandez9168]

Can I do that to a 02 grand marquis

[@Mr.How2Hemi]

gustavo Fernandez yes ... just match your year car too the year truck to take the coils off of