This series is all about general knowledge of how to get what you want from your stove. If you have any questions please drop me a comment, but I hope they are helpful as they are.
Пікірлер: 63
@CraigK80 Жыл бұрын
Brilliant brilliant brilliant! The best stove bloke on KZbin! Thank you for your excellent videos and hard work guys! Thank you
@TheTortoise Жыл бұрын
😆 way too kind, thanks a lot. The channel is literally pointless without you guys though! Thanks a lot.
@scottferris72359 ай бұрын
I agree…..hands down!!
@LRDefender1968 Жыл бұрын
Awesome video guys, thank you from a nooby! Kind regards Tony
@TheTortoise Жыл бұрын
No worries, this is part of a whole (how to use a stove) series. I’m hoping they’ll be useful.
@rafalmarciniuk5815 Жыл бұрын
Great video as always 👍🏻 after your recommendation I have bought allure 7 and I'm can't imagine life without stove now
@TheTortoise Жыл бұрын
Excellent, glad to hear it is working well!
@rafalmarciniuk5815 Жыл бұрын
@@TheTortoise could you make a video about keeping right temperature, overheating and overloading the stove? And when close the air vents? Thanks 👍🏻
@TheTortoise Жыл бұрын
@@rafalmarciniuk5815 it’s tricky because every stove is different, but I will have a think about what I can potentially standardise.
@rafalmarciniuk5815 Жыл бұрын
@@TheTortoise thank you
@nikprenga2796 Жыл бұрын
I was taught to stuck the logs standing up, i tend tu stuck the thin, small kindling in middle then a stuck a bit bigger ones around it, It does light up quickly in my experience
@TheTortoise Жыл бұрын
Yea you’re right, though in stoves there are a number of advantages to light using the top down method. The main one is all about creating draw in the chimney and reducing emissions during lighting (which is when most emissions are created).
@TerryJamesCole Жыл бұрын
Thank the lucky stars for the tortoise thermometer!
@TheTortoise Жыл бұрын
Haha, thanks a lot!
@Monkeyboy197510 ай бұрын
Brilliant moving into a new house that has a wood burner and can’t wait! I don’t know if anyone will read this lol but are those smokeless bricks any good or should I stick with wood?
@TheTortoise10 ай бұрын
It all depends on what stove you have. Some stoves are better suited to smokeless fuel use and others are wood focused. Do you happen to know the name of it, or can find it on any paperwork?
@jandavies86224 ай бұрын
So I have the woodpecker 5, should I use two logs and kindling or more logs the kindling to get it going?
@TheTortoise3 ай бұрын
I have reviewed a Woodpecker. It may be worth watching that video as it does show what I used to light the stove.
@ambervalleydrumschool10 ай бұрын
Great video, many thanks! Can I ask, the temperature range you are speaking about for a good clean burn.... is that the same if youre burning logs in a multi fuel 5Kw stove too? My stove gives off lots of heat when burning wood, the temp says around 240C... Im guessing alls fine at that?
@TheTortoise10 ай бұрын
Yea regardless of size of stove you aim for the same temperature. 240° is what I aim for when lighting and I tend to control it down to around 150°C. Running at 240°C is really hot, so is verging on wasteful with regard to fuel consumption. You’re also likely to wear parts a bit quicker.
@elizabethatkins251910 ай бұрын
Hi! Please can you do a video on how to start / maintain a smokeless coal fire? Many thanks
@TheTortoise10 ай бұрын
I have a couple multi-fuel stoves coming soon, I Will definitely go deeper into smokeless fuel use with those (could be a Woodwarm).
@nickmarrow264511 ай бұрын
A video on maintaining temperature would be good because I seem to be up and down constantly adjusting air flow could be my ocd trying to get the best looking flames but it seems to be roaring or looking like it’s going to go out 🤔
@TheTortoise11 ай бұрын
Out of interest which stove have you got, because any advice on this would vary hugely from stove to stove.
@nickmarrow264511 ай бұрын
@@TheTortoise Hunter Herald Allure 5
@TheTortoise11 ай бұрын
Okay. Well you’ve got a good stove for control, so we should get somewhere. The key thing to start with is a hot fire and dry fuel, assuming you’ve got that, then the next thing is learning your chimney. If you’ve got a strong draw then you may find that with a hot fire you need to close it fully. If that’s too far then I would nudge it open very slightly. I generally want it to have slightly more air than I initially think as the stove will settle over 5 min or so. I can then assess it after that point, it could be you’re adjusting it too quickly so it’s never settling in the right place. The other most common issue is the stove is not hot enough so you’re killing the fire before there is enough heat to maintain it. I hope this helps, but let me know if I’m barking up the wrong tree.
@nickmarrow264511 ай бұрын
@@TheTortoise that’s great advice I think the best thing for me to do is test this out and see. I think we do have a really good draw on the chimney and that could be part of the reason as well as my own impatience! I will try what you’ve advised and let you know! Thanks for the reply and advice as always
@TheTortoise11 ай бұрын
Any time! Let me know.
@psisky Жыл бұрын
Finally got our new stove in. Last Monday, the Allure 4. We love it, but it feels like we have a new pet we have to feed a lot. Does kiln dried wood burn faster?
@TheTortoise Жыл бұрын
There is a knack to everything. If you're just running hot for a few hours in the evening then yes you will use more fuel. This is the time that the stove and room are getting unto temperature, once you've got that done, you can then control the stove down and increase fuel economy and burn time. It's a bit like the difference in fuel economy in a car between motorway miles and going to and from the shops. As you spend time with it, you will start finding ways to improve fuel economy and get it to work the best way for you. Hope you enjoy it!
@ririk41919 ай бұрын
We have the arundel xl mk2 and my husband hates how I use it aa he feels I use far too much wood and go through it too quickly so … Question… I add coal first and then a couple of pieces of wood and then light a few of the fire lighters and put the air vents fully open top and bottom and once a flame gets going I shut down the vents slightly … Now what am I doing wrong? X
@TheTortoise8 ай бұрын
The primary issue is that this stove is a multi-fuel stove. You could allow the ash to fill the tray and keep it there, as this will slow burning down (as it will work more like a woodburning stove). It doesn’t sound like you’re doing anything terrible at all. Just have in mind (where multifuel stoves are concerned) “a clean stove is a greedy stove”.
@LostRevengeful9 ай бұрын
Any tips on keeping a woodbury slimeline eco 5 within temp? Always seem to be dropping out of optimal temperature, thanks!
@TheTortoise9 ай бұрын
I would very much expect this was due to a lack of fuel. How hot do you get it when it first lights?
@LostRevengeful9 ай бұрын
@@TheTortoise just gets above 300, would you recommend going higher before turning down?
@TheTortoise9 ай бұрын
Definitely. I would get stove a bit higher and then watch it for a bit. Once you’ve worked out how it wants to run you’ll do it automatically, but my guess is you’re either not putting enough fuel in or you’re shutting it down too far. Rather than shutting the vent, ideally you need to adjust it slightly to get the desired result. Just closing it on a stove as controllable as yours will essentially always result the stove cooling down, blackening the glass and going out. Perhaps get it to 350° and then shut it down half as much as you currently are. Then through trial and error you should work out what suits you and your stove.
@LostRevengeful9 ай бұрын
Thanks for the help! Appreciate it @@TheTortoise 🙏
@Comedyman1107 Жыл бұрын
I have a bassington compact stove so relatively small , the flames get sucked up into the flue area , is this normal?
@TheTortoise Жыл бұрын
Yep that sounds normal. When you close the door and close the vents you’ll hopefully find that the flames are a little more wavy. But the chimney essentially acts as a big hoover, so flames, smoke, and some heat are always being sucked up the chimney.
@alandoyle34268 ай бұрын
Hi mate got portway multy fuel sily question how do you maintain 400 degrees or decent heat , as I’m new to this as I’m use to working industrial wood waste technology burners , I seem to get high temperature but lose a lot of heat d o i keep both vents fully open or shut down , if that make sense thanks 🙏
@TheTortoise8 ай бұрын
Opening the air vents will allow more air and a faster burn. Depending on the stove and chimney, this can either create loads of heat in the room, or just increase flue temperature. Generally you want to get a stove to operating temperature and then close the vents to a level that maintains it. This will prevent you from wasting fuel and over firing the appliance, and it will also prevent excess air dragging heat up the chimney as it rushes through.
@alandoyle34268 ай бұрын
Thank you made massive difference just need keep practicing, shut both vents nearly off slowed the burn and kept the thermometer at 400 perfect 👌
@TheTortoise8 ай бұрын
Excellent, glad to hear it!
@njh8277 Жыл бұрын
Please review La Nordica stoves please
@TheTortoise Жыл бұрын
I will have to have a look.
@OlduselessGamer23 Жыл бұрын
Hey me again! I eventually got my stove. So I now need more advice (sorry) into 2nd burn with birch wood operating round 400. I'm seeing not plumes but smoke still coming out of chimney, like a white ish smoke. Is this natural as I always assumed there wasn't meant to be any? Also does it take hours to get rid of the black carbon on bricks and glass? Sorry for being a pain. Thank you for all the advice.
@TheTortoise Жыл бұрын
It sounds like the stove isn’t hot enough. Where is the thermometer? You always get some visible smoke, and white smoke sounds pretty good.
@OlduselessGamer23 Жыл бұрын
@TheTortoise thanks for responding. The thermometer is on the pipe from the registration plate to the stove. Maybe 5 inches from stove up the pipe.
@TheTortoise Жыл бұрын
@@OlduselessGamer23 very strange. At that temperature I would be expecting the black to be gone from the bricks in literally a few minutes. It sounds like wet fuel?
@OlduselessGamer23 Жыл бұрын
Tha ks again for response, after another burn for an hour back in bricks did go. Bricks clean now 😃 Still a little bit of what is white smoke but not like a steam train, and not constant. The fuel I used was kiln dried and even checked with a moisture meter. (All good there) maybe it's been my incompetence as a new user. 🤦♂️ thank you for responding it's most appreciated. Still watching your video over and over to drum this stuff in my head. Keep em coming . Thanks again.
@TheTortoise Жыл бұрын
@@OlduselessGamer23 ha, thanks for watching! Not sure why it didn’t go before, but it sounds like things are doing what they should now (could have been a bedding in anomaly). Definitely let me know if you need anything else.
@xyz5703 Жыл бұрын
I just asked about this legendary thermometer (are there 2 versions of this clip?) I think there is 'supposed to be' a link in the comments or a button on the screen for actual 'punters'. Ahem...... 🤭😁
@TheTortoise Жыл бұрын
Sorry, I’m rubbish at this internet lark: thetortoise.net/products/the-tortoise-stove-thermometer
@shaunjones7234 Жыл бұрын
Can you stack your stove if it’s a cast burner?
@TheTortoise Жыл бұрын
What do you mean by that, sorry?
@shaunjones7234 Жыл бұрын
@@TheTortoise I’ve recently purchased a cast iron multi burner and I was told not to stack it up with wood when I first light it.
@TheTortoise Жыл бұрын
@@shaunjones7234 yes, stoves do need bedding in: What the Pro's do with a new stove. kzbin.info/www/bejne/mHSqiaCra7toodU But once it’s all set up, there is no issue with filling your stove appropriately as long as you keep it within operating temperatures.
@EddRandomCrap Жыл бұрын
👍👍
@CoconutandFamily8 ай бұрын
comment
@scottferris72359 ай бұрын
I want a tortoise thermometer…!
@TheTortoise9 ай бұрын
thetortoise.net/products/the-tortoise-stove-thermometer Here it is