How to LIVESTREAM VIDEO from a DRONE to ATAK UAS Plugin Tool

[@Skynetdronesystems]

Hope this tutorial is helpful! Let us know in the comment section below how the livestreaming goes and what aircraft you’re using! Here is the link to PART 1: How to INSTALL ATAK and the UAS PLUGIN in the DJI Mavic 3T kzbin.info/www/bejne/bGHQk35sms90o68

[@FrankCastle187]

Thank you so much for putting this tutorial together! Works perfectly!!!

[@Skynetdronesystems]

Glad it helped! 🔺

[@selfdefensefirearms3281]

You the man! Worked first try! Great tutorial

[@Skynetdronesystems]

Thank you and great job getting it up and running! 🔺

[@jfraz6246]

So running the DJI on ATAK gives you the MGRS data for where the drone is and looking?

[@Skynetdronesystems]

It does with the M3T, I haven’t looked to see if it’s shown on other aircraft. Anyone on your server can see where the drone is and the direction it’s looking. You can also show a live video stream directly onto the map of the area the drone is monitoring. 🔺

[@amandasmith8160]

Great tutorial!!

[@Skynetdronesystems]

Thank you! 🔺

[@thetaksyndicate6234]

keep crushing it guys! I would recommend a couple changes on how you are doing the stream sharing. You are making it way harder than this needs to be.

[@Skynetdronesystems]

Roger that! We’re always looking for an easier way to do things. What changes would you recommend making to the stream sharing?

[@reconfivemedia]

AJ, what would you recommend? It did seem a bit clunky but how could we make it easier? That is not take anything away from what Seth is doing with TAK and the UAS Tool. So kudos to you Seth. Thanks!

[@Skynetdronesystems]

No worries! My priority was to get people up and running successfully so they could use the software. I’m sure there’s a lot of things that could be streamlined in the process! 🔺

[@thetaksyndicate6234]

All good. Let me get something written up for this to help.

[@markpierz4970]

​@@thetaksyndicate6234?

[@davronzakhidov3276]

Great tutorial. How to get the MGRS grid on DJI? I only have a DJI Mini 2.

[@Skynetdronesystems]

I’m not sure how to enable/disable the MGRS grid or what aircraft it displays with. Sorry I wish I had the answer for you. 🔺

[@cybercrimes-00]

do you guys have a method of streaming for a DIY drone possibly but routing the video recive to the pc some how ?

[@Skynetdronesystems]

Go to 6:02 of the tutorial. You can pull the stream from any drone that has a place to enter an RTMP, RTSP, SRT encoder link. See if that helps, if not let me know and we’ll figure out a work around.

[@cybercrimes-00]

@@Skynetdronesystems i'm not saying i know a lot about drones but i mean for none digital drones like dji like analog video witch i'm more wondering if there is a hardware way to connect the receiver to a android or PC to live stream it its hard to explain but most of the time diy drones aren't sending the video to a computer so you cant use software they have separate parts that don't export video outside of HDMI cables ( FPV camera--> VTX----> (VRX)/----> screen or goggles )

[@Skynetdronesystems]

I see what you’re saying. There is a PDF I found that completely explains how to incorporate DIY FPV drones into ATAK recently. It’s titled “UAS FPV GUIDE” if you locate that pdf file inside the ATAK site TAK.gov or ATAK application and download it. It has step by step instructions regarding analog etc.

[@cybercrimes-00]

@@Skynetdronesystems i searched the website and i know how its sounds that im asking for a walk thru but i could not locate any pdfs with the link provided

[@Skynetdronesystems]

I found it for you. Hopefully this helps. To download the PDF: -Open the ATAK application. -Then launch the UAS plugin. -Click return to UAS tool. -Open Settings -Scroll down to the bottom until you see “Show FPV guide” -Click on the 3 vertical dots in the top right inside the PDF. Then click download The FPV guide is something I’ve been excited to dig into but haven’t had the time to yet. Let us know if it works for you and anything interesting you find inside the PDF! 🔺

[@miestermind]

What if i dont have a dji. I have a custom drone that runs on PX4?

[@Skynetdronesystems]

Here’s a link on how to install ATAK and the UAS plugin tool. kzbin.info/www/bejne/bGHQk35sms90o68si=EkVd6kU4BgRIypUc I didn’t see PX4 as a selectable platform in “Settings”, “Default Platform Monitoring”. But you might be able to run it directly by selecting none then trying to launch your flight software after ATAK and the UAS tool is running. If not, you can pull the stream directly from the aircraft into ATAK by following the steps in the tutorial at the 6:02 mark.

[@mateuszk1595]

Hi. Do you knows how to connect DJI mavic 3 not 3t to atak ?

[@Skynetdronesystems]

Instead of using DJI GoV5 install DJI Go when prompted after installing the UAS plugin tool into ATAK.🔺

[@ma.santiago89]

@@Skynetdronesystemswould you be willing to do a video call to help a small PD achieve this?

[@Skynetdronesystems]

Roger that 100% shoot me an email to [e-mail]

[@tomasciri6209]

is it possible with avata 2 ? im really trying since 1 month without any sucess can i get some help please?

[@Skynetdronesystems]

I haven’t run ATAK on any of the Avata aircraft however there is an ATAK UAS FPV PDF that is dedicated to installing it on FPV aircraft. To download the PDF -Login to ATAK -Launch UAS Tool -Click return to UAS Tool -Select open settings -Scroll down until you see the show FPV guide -Select that then click the 3 dots in the top right and select download 🔺

[@maximekarman5824]

Hello Thank you for the video I have an issue because there is no IP address after the primary server how can I deal with this please? Thank you for your help

[@Skynetdronesystems]

Make sure to launch the stream. Then it will display the IP address after the primary server. 🔺

[@maximekarman5824]

@@Skynetdronesystems Hello and thank you very much for your answer, but even when the stream is live i don't have any IP address appearing

[@Skynetdronesystems]

Hmmmm what are you using for a codec? RTSP, RTMP, SRT?

[@maximekarman5824]

@@Skynetdronesystems I tried to create live with all codes and i have the same issue each time

[@Skynetdronesystems]

What streaming service are you using? I’m thinking there’s a simple issue with the initial setup of the stream. Let’s try setting up a new SRT stream, follow the steps in the setup of the SRT stream directly from the tutorial. Are you using any security protocols?

[@Kai-n2f]

I want to know how to connect ATAK to my AUTEL drone

[@Skynetdronesystems]

You should be able to follow the steps in the video tutorial here: kzbin.info/www/bejne/bGHQk35sms90o68si=EkVd6kU4BgRIypUc Just select AUTEL from the “settings”, “default platform monitoring” menu instead of DJI Go or DJI GoV5

[@tomasciri6209]

hey man i have followed every step and still cant put it live streaming im using wintak and ios itak

[@Skynetdronesystems]

What kind of an issue are you running into?

[@tomasciri6209]

@@Skynetdronesystems after setting up the stream there is no ip address beside the primary server

[@Skynetdronesystems]

Did you launch the livestream? Until you launch it and the stream is live you won’t get an IP address.