How to load grease into a grease gun

[@flawdanative3223]

I really admire your humility... Thanks for the video. I watched a video earlier where the person unscrewed the grease gun at the top just enough to break that vacuum so you can now pull back the plunger a lot eaiser.

[@charlesbullis6241]

Thank you! I do this once every 10 years. Forget each time.

[@andym3511]

Isn't it funny how everything goes wrong when you turn on the camera. Mowers running, sneezing, forgetting what to do, etc. That is so ME! I can relate! You get extra points for not swearing your head off (like I would have done!)

[@Buckwsr]

Ha ha, yeah! Well, at least I got the job done in the end!

[@RickActual]

All the video I needed, with a little humor added in. Thank you.

[@Buckwsr]

Glad you enjoyed it!

[@rikityrik]

I’m right there with you, I’ve used a grease gun enough to know better, but forget the same as you. Seams it never goes as smoothly as it should. One day it’ll stick. I hope, Lol

[@Buckwsr]

Thanks for watching. I never remember the right procedure for this, and that's why I made the video.

[@nevetsreyd4688]

50 seconds into this vid and I’m convinced that you’ve never done this before and should probably watch a KZbin vid or two.

[@Buckwsr]

KZbin? What's that?

[@HansjeVdTillaert]

Well he did the job and that's all what matters!

[@mayydayy8101]

🤣🤣🤣🤣🤣🤣

[@demoticshadow2494]

Why do we push the rod back in when done

[@LatimusChadimus]

@@HansjeVdTillaert that's all what matters. Great grammar and spell check

[@timmo491]

Greatest instruction vid of all time....all the best from England!!

[@Buckwsr]

You, sir, have excellent taste, and clearly know a good video when you see one!

[@ronbass8136]

Great video. I'm like you, it's seldom I have to replace a tube and I forget how.

[@beachamgroup2482]

Need to grease the plunger lol. Thanks for uploading.

[@antonyall]

Marvellous as it also shows problems we may run into so the problems are more of a tutorial as well. Thanks much man!

[@mapo130]

Good video ...thank you. Now i can load my new decalimeter !

[@squarehead-degree2623]

Tough pulling it back ? Wow! Stop greasing buddy ! Your a nightmare working !

[@Buckwsr]

You know you loved watching it!

[@joshandbrendakellis3300]

Great and funny video! You helped me a lot, but that is clearly a vienna sausage lid.

[@Buckwsr]

Tuna fish, I say...or maybe cat food...which is essentially the same thing!

[@koolbreeze4906]

Thanks for the instructions👍🏾

[@the_drilla6284]

Bless you. Thank you brother. Never used a cartridge on a grease gun. I used to load it manually. Now i know. I allways hade some cartridges laying around, and allways used the grease by hand for bolts, etc... now i know how to reload one. :D

[@Buckwsr]

Thank you!

[@profudesportt]

The best FOR me today…thank YOU

[@robgillot6766]

Thanks, you made my monday look bright!!

[@rrios283s73]

Are there any types of tubes that are the style of the cocking type , with the pointy tip at the end .?

[@FaithisKey792]

Thank you Buck, after seen you struggle for more than 3 secs to open the plunger. I’ve moved on.

[@Buckwsr]

A real shame....you missed out on some excellent upcoming scenes!

[@michaelmcateer1598]

Thanks, the instructions on the box were worse than useless, i now have grease in my gun.

[@Buckwsr]

Thank you, Michael. Glad the video helped. Oddly, there are those who watch this video and conclude that I'm a clueless imbecile who doesn't know what he's doing. I guess, to be honest, I did have some awkward moments.....

[@misterkoko--fu]

Great help, thanks

[@petet5959]

Now THAT was a funny video. Very informative but I don't know if u realised how funny u were. In the end, u did VERY well. Thanks from AUSTRALIA. :-)

[@Buckwsr]

In the end, I won!

[@MrMikeChain]

Good job, and thank you!

[@Buckwsr]

Thanks so much.

[@xCmDrunkX]

Thanks for this it helped me in a pinch!

[@TaitGuy]

Thanks, Buck!!!

[@1jantheman1]

Thanks I needed the humor.

[@hp15132]

Thanks Can we load grease by hand without cartridge?

[@Buckwsr]

This style grease gun works with a cartridge only.

[@hp15132]

@@Buckwsr Thanks

[@1JohnnyLindo]

Ty!

[@ashwinisidhu]

Thanks for the video , very useful.

[@Buckwsr]

Thank you so much! (You hear that, you nay-sayers???? Ashwini described my video as "VERY USEFUL" !!!!)

[@christawarren535]

Bless you

[@Buckwsr]

Ha ha! Thank you!

[@robertthayer9285]

You cracked me up...i to need refresher coarse every time.that goes for about every thing i do...Brain damage.

[@Buckwsr]

Thanks for the note. Glad you enjoyed the video.

[@triumphriderinblack7406]

Excellent vid. Never used a cartridge before, so this was invaluable. Many thanks.

[@Buckwsr]

Yes, I go a long time between grease cartridge reloads, so I have to come back and watch my own video before doing it!

[@dtruth5769]

Dude your video is hilarious! You should do video on how what not to do. Aka Tool time

[@Buckwsr]

I know what you mean....just keeping it real, right? ....and I won in the end!!

[@berniecork7416]

Maybe let the air out before fully tightening barrel..or did it have an air vent?

[@henriquelopes2697]

Thanks!

[@Stivian1]

Thank you so much👍🏻

[@chrisjackson5516]

Thanks for the video. It helped a lot

[@benduker6839]

Very comical video......thumbs up from me!

[@aprillouttit6156]

Thanks a bunch buddy Grease is the word

[@floodescaper9496]

I'm not even mad that the m3 grease gun looks like that but with a mag

[@danielpeter2802]

Nice

[@stewyoder1806]

It was close but you beat the grease gun

[@Buckwsr]

Yeah. I nearly broke out in a sweat....!

[@bigbamboo936]

Thanks for the laughs

[@Buckwsr]

Glad to be of service!

[@ronsbeerreviewstools4361]

Thanks for posting this informative video. Cheers !

[@spikingviking1977]

Thanks beast

[@MKChannelNetworks]

many type of grease guns ....I need 1 ...still searching

[@estradaj777]

You should be Tim Taylor’s double

[@timgorham7811]

What if the canisstre wont fit

[@Buckwsr]

flip it around the other way

[@timgorham7811]

its around 50 years old. they probably weren't made for one? @@Buckwsr

[@letsfly7562]

I just farted everybody’s eating beans including myself

[@Buckwsr]

Sounds like you're having a good day!

[@ovidiugheorghe8496]

🤣🤣🤣 Funny and helpful 👍

[@jonkirkham7961]

Lmao good man the first thing lol 😂

[@Buckwsr]

Folks seem to either hate this video...or love it and have a laugh. Glad you laughed. Some people need to lighten up...

[@jonkirkham7961]

@@Buckwsr they certainly do top man .

[@billybatts294]

when i get time ill do a video ill show you how to trouble shoot when you think no grease left and theres still half of a tube left

[@felinebline7154]

Hey im a strong guy and my grease g is a beast to pull back and drop lock. Also pressing and turning the threaded top is tough too especially mine with fine threads and the whole thing is greasy. Its a bitch sometime.

[@rajanailookingnewproducts4286]

Why its tight

[@dragally1]

Love it dude , I have to do a refresher every time I grease also . dont let the nay sayers get ya down cause those bitches dont do anything except take their chit to be serviced . Love your sense of humor as well .

[@ruffleschips9055]

How not to change a cartridge. lol

[@LatimusChadimus]

How does this guy have more likes than dislikes and he doesn't even know how to use his own tool? Why this preteen video was suggested to me I will never know...

[@Buckwsr]

Hey Joe, you don't want to be "that guy"....

[@shizont]

the plunger really was stuck. Maybe it needed some grease?

[@Buckwsr]

Nice!

[@sandman6849]

I wanted to watch this to see if you were making the same mistakes I made. Yes you did. One very big one I learned the hard way is be extremely mindful of where the plunger is pointed when pulled out. It locks into the small slot and is easily knocked out and since it is spring loaded, you can shoot grease, even the "empty" one, a good 10ft. Maybe on your brand new driveway concrete in your first home you built... I keep the screw on top on while pulling out the plunger for this reason and I have the new tube all ready to go before taking off the top. Then remove the top, take out spent tube. Watching where that extended plunger is.... Put in new tube and put on the top. One other thing, your grease gun works similar to a caulk gun with that tab. Only difference is the spring loading. Otherwise I have been enjoying some of your videos.

[@Buckwsr]

Thank you for the tips! And for watching the vids! Have a great day!

[@brianmccafferty1470]

Didn't release the air valve on top...

[@GG-xs8vt]

U r funny guy.

[@dennyhawk9893]

You may want to head over to the gym for some strengthening work out or get your wife or daughter to help you out for the next video.someone told me about this and it was good ,thanks

[@Buckwsr]

Thanks for watching and commenting. Made me chuckle....

[@dennyhawk9893]

I'm glad you took it that way I meant it as a joke. Spring in those guns are stout a d of course not easy to hold onto,have a good week

[@dtruth5769]

Yes you did.

[@billybleedscrimsonblood9478]

Lol! Thanks 😂

[@rc4688]

When I get a grease gun the first thing I'm gonna do is read the instructions.

[@Buckwsr]

Yes, of course! And THEN....you will lose those instructions, and by the time you need to re-load your grease gun, you WON'T remember how to do it. And you will return to KZbin and watch my video all over again! Wha-ha-ha-ha!!!

[@AE-kf1qy]

Comedy gold.

[@michael53ish]

🙏

[@kimmokannala4576]

It is much more fun to dovit the wrong way. 😠 I planned to do phototutorial, and only after I f*cked up, I realized I should have checked youtube video about it. 🥴

[@TheLaidbackBiker]

My next step is to watch a different video.

[@Buckwsr]

Can't understand why.....???

[@TinselKoala]

Gesundheit!

[@JohnWilliams-dd7up]

3:41 Me in the morning.

[@RobertSmith-os2zj]

Hilarious

[@irvinggoldberg5365]

FUNNY

[@Buckwsr]

Just trying to keep it real, ya know???

[@mustangsuper1973]

First you better learn yourself how to open the grease canister

[@grupakonrad183]

Vec ko nova obecava....da ces ju razbiti o beton. 🤣🤣🤣