The Anatomy of a Grease Gun

Рет қаралды 7,499

Adventures with Dr. Joe

Күн бұрын

Пікірлер: 10

@VinceEspositoJr Ай бұрын

Is it possible to change to another grease product before the one in use is empty, or is that asking for one big mess?

@JosephHunstad Ай бұрын

Good question. But yes, you can absolutely pull the plunger out lock it, remove the existing cylinder and put your new cylinder in. Of course there will be some grease in the tube and if you don’t want to use that grease, you need to expel it first before the new Comes down the line. Consider subscribing. Thanks. Joe.

@MissyLuigiB. 7 ай бұрын

Could you send me a link to order the plunger?

@JosephHunstad 7 ай бұрын

Please look in the video description. I have the link for actually three of these including the Milwaukee one. Consider subscribing. Thanks. Joe.

@kiwifarmer7254 7 ай бұрын

Hi there ,wondering why you didn,t put all the parts on the plunger in front of viewer ,in which order and which direction before you SHOW putting in the cartridge. maybe that is still possible ,thank you

@JosephHunstad 7 ай бұрын

I think you make a good point I’m sorry I didn’t do that. I will remake that video.

@kiwifarmer7254 7 ай бұрын

@@JosephHunstad Dear Dr Joe, thanks for your reply, what I also like to know about is , is there a rule about how the black washer is placed on the rod depending on if you use a cartridge or grease straight in the gun ? I have the problem that the grease goes on wrong side of the black washer with the result that I run out of grease well before I used all grease, and when I pull the rod back a lot of grease comes out the wrong end of gun ,please help.thanks by the way I thought I fixed the problem by putting grease gun in the refrigerator but still problems.

@JosephHunstad 7 ай бұрын

OK at this point, I think you get to buy a new plunger I believe because if it’s leaking grease that goes behind it that plunger is no good.