How to Locate Lift Points 97-05 Lexus GS300

For More Info visit us at: 1aau.to/h/bzw/
In the video, 1A Auto shows how to safely raise and support your vehicle by showing the best locations to place your jack and jack stands. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, Lexus GS300
This process should be similar on the following vehicles:
1998 Lexus GS300
1999 Lexus GS300
2000 Lexus GS300
2001 Lexus GS300
2002 Lexus GS300
2003 Lexus GS300
2004 Lexus GS300
2005 Lexus GS300
🔧 List of tools used:
• Floor Jack 1aau.to/on/1AXA...
• Jack Stands 1aau.to/oo/1AXA...
Subscribe: / @1aauto
Check out our playlist:
Lexus GS300 1997-2005 2nd Generation: • Lexus GS300 1998-2005 ...
For More Info visit us at 1aau.to/h/bzw/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@TLCHobbies]

So... where do you rest the rear of the car on jack stand?

[@samhoskins8706]

This is the best Lexus jacking video. Simple, accurate and to the point. thanks.

[@HOTRODRICO]

super important video for this car i have such a hard time with this issue... much appreciated.. thanks

[@petersmith5219]

It's exactly the information I was seeking for my trolley jack. From Downunder ...thank you.

[@travisstamp7428]

My gs is too low for a jack to get that far under. Lol

[@freedomfinalfrontier5878]

The user manual photos is NOT clear ..and shop manual is expensive for retail customer so video was definitely helpful to put the jack stands

[@vladimirkovalchuk2863]

not to be a downer, but in the Service Manual VEHICLE LIFT AND SUPPORT LOCATIONS do include the four "pinch rail" spots my guess is that the spots are weak is all Great video, thank you

[@SamFBM]

yeh they crumble in as you jack it up

[@mescnick]

Great job guys

[@robertmoriarty925]

Good to see the right and wrong. Thanks

[@1AAuto]

+Robert Moriarty Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@FlySoGood]

invaluable

[@charliechhin6826]

Thank you. It took some effort to find this info on my own prior to this vid. But this video was very detailed and informative

[@1AAuto]

+Charlie Chhin Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@davidngu7696]

I have 2006 gs300 I use floor jack how do I do it for front and rear

[@petersmith5219]

DON'T . I nearly got killed doing that. I put the car up on all four jackstands in acocrdance with manufacturers jacking points and it toppled forward!

[@billybob2844]

It would be nice in the future if you show where from the outside of the car as well as under. By that I mean about x inches from the wheel and a few inches from the tire change jack point. Since we are using a jack one is not likely to start with a clear view under the car. I also had trouble figuring out just where in the rear to use my floor jack. A little more detail would have been reassuring that I was not going to dent my floor.

[@garyzhang5099]

Big baby😂

[@lexusboybryan8678]

Thank you , I was tired of damaging my car the same way as this car

[@1AAuto]

+LexusBoyBryan Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Bigpapspsosoodww1234]

What about the rear of the car? Can I jack by the diff?

[@JulioOrtiz-ub3yo]

Thanks

[@fiberkim4443]

Do you have any idea on which front crossmember is okay to jack up with floor jack and which is not? I have shevy trax by the way.

[@SamFBM]

No no not that rear bit by the wheel. It's a sill. Mine went straight through ... Thanks

[@one_three_eight]

Then where?

[@fiberkim4443]

Why they made fake fraim rail……..