HOW TO: Lower Your C10 Seat The Right Way |

In this video, we show you how to lower your C10 seat the right way using Full Custom Fabrication seat brackets (link below). These quality brackets are CNC plasma cut from 12 gauge steel, powdercoated and fit perfectly. These work for C10 factory seats from 1960-1972.
Full Custom Fabrication lowered seat brackets: squ.re/2tcGh5r
Rick’s Custom Upholstery (seat cover and dash pad): ricksupholstery.com
Marietta Auto Trim (foam work/spring repair): mariettaautotrimshop.com
Want to SUBSCRIBE to the channel and stay plugged in on our weekly videos? You can do so via this link: kzbin.info...
INSTAGRAM: / whitlock_garage
Want to know the parts we use? Fairly comprehensive suspension, wheel/tire, and patch panel/replacement parts list BELOW:
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and purchase the item, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Suspension Parts (Lowered)
DISC BRAKE KIT
Speedway 1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit: amzn.to/2ReByhN
DROP SPINDLES
Belltech 3121 3” Drop Spindles (63-70 c10; requires 71-72 disc brakes): amzn.to/2Vw21G7
Speedway 1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit: amzn.to/2ReByhN
McGaughys 2.5” Drop Spindle (63-70): amzn.to/2SDVwPA
McGaughys 2.5” Drop Spindles (71-72; 1.25” rotor): amzn.to/2TN4pGR
SQUAREBODY DROP KIT
Complete Belltech 4/6 Drop Kit with shocks for Squarebody (73-87): amzn.to/2RwlB5T
SHOCKS
Belltech Street Performance Drop Shocks 9547 (Premium) (63-72): amzn.to/2LQV3qH
Belltech Nitro Drop Shocks 9147 (Economy) (63-72): amzn.to/2VvJGcs
Belltech Street Performance Drop Shocks 9548 (Premium) (73-87): amzn.to/2RBHgJW
Belltech Nitro Drop Shocks 9148 (Economy) (73-87): amzn.to/2SDORFd
ADJUSTABLE TRAC BAR
McGaughys 1965-1972 Chevrolet C-10 Track Bar; Adjustable 63175: amzn.to/2LW5XMc
DROP SPRINGS
Speedway 1963-72 Chevy Pickup Front Lowering Coil Springs, 2 Inch Drop: amzn.to/2SDX2kK
Speedway Rear Drop Springs 1960-72 Chevy Truck 3 In Drop: amzn.to/2VyYxTd
Speedway Rear Drop Springs 1960-72 Chevy Truck 4 In Drop (pair with 2” block for 6” drop): amzn.to/2VuTIKO
Speedway Rear Springs 1960-72 Chevy Truck 5 In Drop (pair with 2” block for total 7” drop): amzn.to/2VwiSst
C-NOTCH
McGaughys Rear C-Notch, 1963-1972 GM C-10 Truck 63167 (typically necessary with 6”+ rear drop): amzn.to/2LZ06FX0 Truck 63167 (typically necessary with 6”+ rear drop): amzn.to/2LZ06FX
Wheels/ Tires
CLASSIC
15” American Racing TTO (staggered set)- currently on green ’68 shorty, Teddy
15x7 (front): amzn.to/2SDThMj
15x8.5 (rear): amzn.to/2C2WRso
MODERN
18” American Racing TTIIs - GRAY (staggered)
18x8 (front): amzn.to/2Ra6WOp
18x10 (rear): amzn.to/2RwsQuB
18” American Racing TTIIs - POLISHED (staggered)
18x8 (front): amzn.to/2SyXZuB
18x10 (rear): amzn.to/2GWHibc
20" American Racing TTIIs - GRAY (staggered)
20x8 (front): amzn.to/2SBMVNx
20x10 (rear): VN2152173
20" American Racing TTIIs - POLISHED (staggered)
20x8 (front): amzn.to/2F9IVQs
20x10 (rear): amzn.to/2Fb0e3B
FACTORY-STYLE
5 lug factory style steelies for hubcaps (63-87)
15x6: amzn.to/2C70IV8
6 lug factory-style steelies for hubcaps (63-70)
15x8: amzn.to/2COuLCA
Patch Panels & Replacement Parts (for 67-72 c10)
AMD Cab Corner (Right): amzn.to/2VvIu8N
AMD Cab Corner (Left): amzn.to/2RtvLo5
AMD Bed Fleetside Header Panel (for steel floor): amzn.to/2SJ6Avb
AMD Bed Fleetside Header Panel (for wood floor): amzn.to/2LQZJgf
AMD LH Inner Fender: amzn.to/2SBU28I
AMD RH Inner Fender: amzn.to/2SDTRcX
AMD Rear Sport Bumper (fleetside): amzn.to/2SBJg2f
AMD Outer Cab Floor Extension LH: amzn.to/2SCGc63
AMD Outer Cab Floor Extension RH: amzn.to/2C0fkFN
AMD Footwell (kick panel) RH: amzn.to/2LSDwOX
AMD Footwell (kick panel) LH: amzn.to/2LRDLKa
AMD Inner Door Bottom RH: amzn.to/2SDCB7M
AMD Inner Door Bottom LH: currently unavailable
AMD Passenger Fender Cup (under battery tray): amzn.to/2LRUGML
AMD Inner Roof Repair Panel (visor area in cab): amzn.to/2RENnNX
AMD Outer Door Skin LH: amzn.to/2VwrE9V
AMD Outer Door Skin RH: amzn.to/2RbbOCT
Outer Rocker Panels Left and Right: amzn.to/2C4xTsJ
QUESTIONS or COMMENTS about parts or anything else GM TRUCKS? Email us at [e-mail].

[@UNITEDBYTRUCKS]

New videos coming to the channel every week in 2019! Please share our channel with your friends. Easy to do via this link: kzbin.info

[@ericfrisby6980]

So happy I came across this video. I just finished the upholstery and new foam on my c10 bench seat and let me tall you, my head is bouncing off the top of the roof. So I ordered a set and I can’t wait, I will no longer look like a nerd driving down the road.

[@hammerdeadgarage8592]

Thanks for this video! Just installed these on my 72. One of these best things I’ve done.

[@UNITEDBYTRUCKS]

Great to hear!

[@tedfresch6364]

Just installed today and they really make a difference - thanks!

[@perenford7499]

Really enjoying your videos Whitlock Garage. I purchased the wrong seat brackets too. Advice for anyone looking to install these brackets. Take the seat out and measure the brackets per the FCF website. They have pics to show you where to measure. I was lazy and tried to measure the seat bracket still in the truck and sure enough, was wrong. I have to say the folks at FCF are great. Very responsive and swapped out my brackets without any hassle. Great folks to deal with.

[@UNITEDBYTRUCKS]

Peren Ford thanks, Peren! Yeah, i wish I’d gone into a little more depth on that but didn’t have my factory brackets handy when i was filming the second day. And yup, Zac at FCF is a legit dude. Super easy to work with!

[@aWalprod]

Just got my set bolted to the seat. Can't wait to finish the rockers and get it installed.

[@UNITEDBYTRUCKS]

Awesome!

[@9T5Z28]

Did mine today, what a difference for my belly , thanks for the video

[@UNITEDBYTRUCKS]

Makes a huge difference!

[@solo909]

Were you able to move it back further than the last stock bracket position?

[@JunkyardTailgate]

Nice project, loving the Milwaukee tools!

[@UNITEDBYTRUCKS]

Junkyard Tailgate thanks! Appreciate you tuning in.

[@tinkerongarage8694]

Thanks for sharing....these brackets may be in my future.

[@UNITEDBYTRUCKS]

They're a life changer

[@19ADAM80]

Man, I wish I had a set of those 24 years ago..! 👍🏼

[@UNITEDBYTRUCKS]

ADAM HENSON they definitely make a difference!

[@Squarebody_Builds]

Collapse the column and you can push it in around 4 inches or so. One of the best mods I did to my C10.

[@UNITEDBYTRUCKS]

I've heard that for awhile but never tried it.

[@salvadormartinez7940]

Send me a picture please just to see

[@marcsciandra1208]

Where can I find more information about this? I want to do it.

[@familymann1956]

Now I wanna see you change break pads while leaving the tire on 😂

[@UNITEDBYTRUCKS]

That ain't gonna happen! haha

[@hermyherm365]

I sent your vids to a few of my Chevy buddies

[@UNITEDBYTRUCKS]

Hermen Lomas thank you!

[@jasonbarton766]

yeah, this would be the first mod i would have to make, thats for sure!!!!!!! ha ha thanks for walking us through that proceedure!! those seat are heavy, im sure you wouldnt have minded a helping hand on round 2!!!!

[@UNITEDBYTRUCKS]

No sir! But it's amazing what you can get done on your own. Thankfully my son helps out as much as possible.

[@iceman1739]

Every time i watch you and dang teddy I'm up on Facebook all night looking for a truck 😂

[@UNITEDBYTRUCKS]

haha I still have that bug too.

[@DriverGuy23]

My ‘65 didn’t have a seat, so I used a seat out of a Ford. Worked great and it was already lowered.

[@Slick68chev]

It's very difficult to get the bolts in from the top, so I put bolts in from below and used them as studs, then used washers and nuts. Just a helpful tip.

[@UNITEDBYTRUCKS]

Slick68chev thanks, man! I’d actually already thought about doing that with the old seat brackets. Such a pain to get bolts back in from top with new carpet.

[@johnfrese4851]

while the seat was out it would make a good time getting that right door un locked because it would give you a little more room to work before install the seat

[@UNITEDBYTRUCKS]

Yup, but i knew it was just stuck. We got it open no problem. Didn't have time to fool with door then.

[@hermyherm365]

You need more subscribers bro

[@UNITEDBYTRUCKS]

Hermen Lomas thanks buddy! We’re working on it. We’re not quite 3 months old yet so i think we’re growing well, but will always take more! We’ll keep the content coming if y’all will keep talking us up!

[@solo909]

Did the bracket allow you to move the seat back further as well or just lower it? I’ve read that the bracket actually moves the seat forward a little. What are you’re thoughts? I need something that does both moves it down and back. Thanks 🤙🏼

[@WarBeardTheRed]

Wish I could find a bracket to move back my bench seat in my Squarebody Suburban. Need more legroom.

[@UNITEDBYTRUCKS]

I hear that! I bet somebody will make them soon.

[@jadenschroeder339]

Do you have to have the gas tank relocated to gain the 1.5” back or no?

[@villageidiot819]

Only thing I would add (I just put a pair in) Take a solder gun and melt your carpet around the bolt holes in the floor and run a tap thru them so at least you are not fighting those 2 elements. A ratcheting box end wrench is almost a must to get the bolts tight at the floor.

[@UNITEDBYTRUCKS]

That's some great advice! Thanks for watching and giving us some feedback.

[@villageidiot819]

No problem we are all here to help and learn.

[@johndudley5987]

That’s a great idea. Should work with the buckets too huh.

[@UNITEDBYTRUCKS]

I don't think they will but I've asked FCF about it. I don't have a 69-up bucket here to try but I'm positive they WILL NOT work on buddy buckets. They have a whole frame to themselves.

[@johndudley5987]

Yea was thinking you would need two sets. Definitely nice on the bench though

[@UNITEDBYTRUCKS]

John Dudley that’s exactly what i thought and asked. I’ll let ya know!

[@pt_atx]

Your son is hilarious!!

[@UNITEDBYTRUCKS]

He really is!

[@familygunsandrides....8024]

I need some for my 83 Chevy C10

[@1977jayrock]

Hey man love the video ! And kick ass truck ! Hey I got a 69 I want the lowering brackets do you have any idea if I would need the long or short bracket etc ? Or can you tell me where I would need to measure from on the seat ! Thanks

[@UNITEDBYTRUCKS]

Check out their website linked in the description. It shows you exactly how to measure.

[@joshroland]

I want to order some of these. Where do you need to measure to get the right ones exactly?

[@UNITEDBYTRUCKS]

Josh Roland if you click the link below they tell you how to, but I ended up measuring the height of the rear part of the original seat bracket. It’s much easier to do, naturally, with the seat out.

[@christinewoodruff255]

Sooo, with these brackets you can no longer move the seat forward or back?

[@baloocito69]

Hi I’m a Chevy fan I have a 91 obs n a pair of s10 .. I always wonder y u can’t cut the hump out of the floor. I know it’s more work but u will b able to see way better Y didn’t u fix the door when u took the seat out plus u did show how to tilt the seat back some.

[@UNITEDBYTRUCKS]

The purpose of the video was to show the audience how these brackets work. I was on a time crunch and didn't have time to fix the door. And the seat doesn't tilt rearward with these brackets. It simply has adjustability at the base of the seat so that you can move the seat more forward or rearward.

[@thomaswhite3831]

It helps to remove the seat back first .

[@unmalo2768]

Is it ok if I just order the right brackets the first time? Or do I have to do it 3 times like you? Just wondering? LOL!! Cool video dude, I'm a Chevy truck guy & I subbed

[@UNITEDBYTRUCKS]

haha! I only had to reorder once, for the record. :) Thanks for tuning in.

[@bigbawsz2054]

So it looks like you need to remove stock brackets and there is no more moving seat forward or backward with brackets correct?

[@UNITEDBYTRUCKS]

Correct. But you gain 2” front to back and 1.5” down. It makes all the difference.

[@phillipa7595]

Would this work on a 81-87 standard cab for the bench seat? Having trouble finding any decent seat rails. Help!

[@UNITEDBYTRUCKS]

These are only for 67-72. I do not believe they’ll work on 73-87 seats.

[@JasonJones-sv1xe]

Wish they made em for my ‘76.

[@ralphalvarez5465]

Watching your video and another one regarding modification to the seat brackets, it looks like the originals were mounted backwards. Just an observation

[@UNITEDBYTRUCKS]

Thanks for the feedback

[@biggwigg8428]

what about the older square body trucks???? 73-87...I want to put some newer silverado(2018) seats with jumpseat in my 85..but its gonna sit to high...HELP!!!

[@carlandrews3475]

What site do I order these from

[@philsigman9088]

My 69 C-10 has an 88-94 seat that needs lowered, but I don't know if anybody makes any kind of bracket for that.

[@UNITEDBYTRUCKS]

They don't. I would suggest swapping back to a 67-72 seat and using these brackets. They're that good.

[@frankie4speed818]

Do you lose the function to move the seat forward and backward with the handle?

[@UNITEDBYTRUCKS]

Yes, but you don't need it bc the seating position is so nice

[@curtschmidt8218]

why didnt you fix the door lock while you had the seat out

[@MrLokojorge]

So you lose the function of the slider, correct? Also, since you had the seat out, why not fix the locked door?

[@UNITEDBYTRUCKS]

Yes, but you have adjustability built into the brackets. And I knew the door was simply stuck and didn't have time to mess with it.

[@chrisspringer3479]

Columbia tn that where i live cool u said that i got a 67 chevy c10 u said ur in a c10 club how can i be part of that n do u live n Columbia tn or near by

[@brettensmith7305]

Does that also work for 73-87 Chevy And gmcs

[@UNITEDBYTRUCKS]

Yes

[@4MATAStudio]

Do they make any brackets for the 80's benches?

[@UNITEDBYTRUCKS]

Not at this time.

[@4MATAStudio]

@@UNITEDBYTRUCKS Thanks man! I just do the old fashion losing some mid section lol

[@johncunningham60]

I tried that lowering 2 inches and it sucked...I put it back stock which was still the best stop..Im 6ft 200 pounds

[@Bob-fz2js]

So how do you like the seat being lower?

[@UNITEDBYTRUCKS]

Love it. Every 67-72 we have will get them

[@dwitcraft]

Thanks for making the video real school. Looks like you may lose your cameraman soon. I see a music video producer there! Hotlanta?

[@UNITEDBYTRUCKS]

haha he's a mess!

[@c10etc]

is your tank behind the seat?

[@UNITEDBYTRUCKS]

No, it has been relocated to under the bed. These brackets still work well with an in-cab tank.

[@gh0stmal0ne]

UNITED BY TRUCKS I’m 6’ 6” tall and 230 lbs, so I definitely want to do this on my 72 C10, but my tank is behind the seat. Will I be able to slide it back all the way like you did or should I relocate the tank first?

[@fivestar8337]

I thought the squarebodies were bad. I don't think I could get my leg under there with the stock brackets.

[@UNITEDBYTRUCKS]

67-72s are the worst!

[@DjCBlaq]

Hold up. This is a thing!! I need.

[@UNITEDBYTRUCKS]

Yes sir! For 63-72 bench seats, it's a thing.

[@robertmarsh5786]

Wish this could be done on a squarebody..

[@UNITEDBYTRUCKS]

Me too! The squarebody syndicate column really makes a difference in squarebodies. 2" shorter and tilt.

[@robertmarsh5786]

@@UNITEDBYTRUCKS wish I could afford one

[@jyjjackfast]

the left bracket has to go right and vise versa. perty sure

[@familymann1956]

Ol teddy needs some rockers there but it has good bones i feel like I would’ve fixed the door issue before the seat but I guess it was a lil better entertainment

[@UNITEDBYTRUCKS]

No doubt about it, but his turn is coming. And I still haven't fixed that dang door. haha

[@robertmarsh5786]

Are you still happy with your brackets?

[@UNITEDBYTRUCKS]

Very much so!

[@raycox1971]

wait, let me get this right.... you ordered the wrong ones 3x? I thought I was the only one that had that luck.....

[@UNITEDBYTRUCKS]

Haha just once but yeah 🤦🏻‍♂️

[@larrywoodruff7530]

I see hernia surgery in your future, really should have a helper, I learned the hard way.

[@mcfuller5020]

I'm assuming you can't slide the seat back and forward with these brackets, therefore I'm not impressed.

[@UNITEDBYTRUCKS]

Nope, but you get much more room and can lock it down where you want it. And easily move it by unbolting it if you need to.

[@ericfrisby6980]

I have never used my stock seat slider so it won’t be missed, great trade up

[@darrenfarr4890]

No need to subscribe to this juvenile outfit. I'll leave the 12 to 14 year olds to be dazzled by lowerd pickups and dancing sedans, I myself haven't been a juvenile since 1969, neither are my tastes

[@jyjjackfast]

the left bracket has to go right and vise versa. perty sure