How to LS swap 95 OBS (PART 2)

[@mikelookingatyou8053]

I found your videos because I am getting ready to LS swap my 1996 OBS GMC and my guy this is the most comprehensive video series for an entire swap I’ve ever seen, thank you for taking the time to make these. You are a blessing

[@SUPSGARAGE]

Thanks for that brother! I do it for you guys! 😊👍

[@ronintheyorky4426]

Plz update on the swap, I'm doing the same with my 96 and I'm lost, I want my gauges, ac, everything to work and idk what to do with a wiring harness, that's the one thing I'm afraid of

[@SUPSGARAGE]

You have Instagram brother? sups_garage

[@bl4122]

I just wanted to say, thank you!! I watched your video's & did a complete LS swap on my 1995 k1500 Z71. I ended up going with a 4L65E transmission & it bolted right up to my 6.0LS motor & I was able to get my transfer case & 4WD working as well. I found this video & committed to doing the job. Thanks again!

[@SUPSGARAGE]

Happy to know it helped you brother 😁👍!

[@miguel45154]

Thank you for making the best ls swap video I’ve seen on KZbin

[@SUPSGARAGE]

I appreciate that brother 😊👍!

[@vemcomachines9634]

I have a 90 obs I was thinking of LS swapping, these videos make the process seem easier than I thought! I appreciate the videos man!

[@SUPSGARAGE]

U should brother u won't regret it and thanks for the support! 😁👍

[@LanceChuculate-se3qp]

I have a 90 too! Single cab short bed

[@matthewgraham2129]

I just slapped the 6.0 in mine yesterday. not horrible to get thr engine in. fuel system is simple cooling is simple. the only real pain is wiring but there are guys who make custom harnesses or you can make it simple and go carb if you feel like it

[@SUPSGARAGE]

I heard it is easier to go carb brother but I have never done it so I don't have any experience on it lol

[@GregEggleston]

This is the best Video on LS SWAP FOR 95 Chevy OBS WELL DONE

[@SUPSGARAGE]

thank you! 😊👍

[@davidcortessi2358]

This guy is good, deserves way more likes and views

[@SUPSGARAGE]

I appreciate that brother 🙂👍

[@sbickmore15]

I've been stuck on the wiriring and searching for months for a video with this exact information. Thank you bro.

[@SUPSGARAGE]

Hope it gets you where you need to be brother!

[@sbickmore15]

@SUPSGARAGE it definitely will. Wiring is my kryptonite. Been stalling for months because I didn't want to mess up this very expensive build. You got a sub for sure.

[@SUPSGARAGE]

@sbickmore15 thanks brother! add me on Instagram if you got any questions 😊👍 sups_garage

[@sbickmore15]

@SUPSGARAGE oh damn, you're not far from me. I'm in N. Houston if you ever travel for meets or shows I'll keep an eye out.

[@SUPSGARAGE]

@sbickmore15 I'll keep that in mind brother!

[@brandonhall4631]

Well done man. Straight forward and easy to understand.

[@larryhoupe2810]

By far the best video I've seen on the swap. Thanks!

[@SUPSGARAGE]

thanks for the support brother!

[@valdezerick]

This videos help me a lot to do my swap thanks for share your knowledge brother god bless you

[@JayJay-de8vq]

There are Alignment marks around the shift shaft area of the neutral safety PRNDL switch on transmission. You would shift trans to neutral and align the marks and tighten down the 2 13mm bolts.

[@JayJay-de8vq]

Also the 2 plugs Into that PRNDL switch are glued in so it helps to warm the plug area with a heat gun before removing plugs. Do not overheat!!

[@SUPSGARAGE]

@JayJay-de8vq thanks for adding that on here brother 🙂👍

[@JayJay-de8vq]

@@SUPSGARAGE absolutely no prob! I'm just starting to look at doing an LS swap on my 95 c2500 suburban. The TBI 454 is just to weak with such low compression.

[@SUPSGARAGE]

@JayJay-de8vq lol yes I agree that's why to me ls is worth it

[@1tojo]

Great video very helpful I'm going to swap a 1994

[@SUPSGARAGE]

Thanks brother I hope this helps you on ur swap!

[@danbuildz2054]

Great video! Did you use the factory oil pan or a low pro pan?

[@SUPSGARAGE]

Thanks brother I used the low profile one brother cuz at the time my truck was at a 4/6 drop

[@danbuildz2054]

@@SUPSGARAGE Mine is pretty slammed as well. Just wondering if it's going to be a problem.

[@SUPSGARAGE]

@danbuildz2054 if urs is 4/6 then don't risk it n get the lowering pan

[@sergiocisneros9929]

Aye bro thank you for all you help did you us a stock 4l60e dip stick ?

[@SUPSGARAGE]

thanks for the support brother! n yes I use the stock dip stick but had to cut it because now it was too long what should fit is a dip stick from an LS3 but my headers would not allow me to use that one so I cut and mark the oil levels from the LS3 dip stick to my stock one hope that make sense

[@TyGuysER]

Did the oil pan work out? Reading the reviews on the one you posted does look to good?

[@SUPSGARAGE]

Yes it works no issues with it till this day brother

[@JanZarate9]

How did you bend the power steering lines, planning on keeping my original lines but could you bend by hand or do you need a special tool

[@SUPSGARAGE]

I did it by hand brother just do little by little until u have enough room

[@MOE13576]

Did you do a 134a conversion (ac) ?..if so, what did you replaced besides the low and high side hose...i bought a new condenser and wondering if i should stick with r14 or convert to r132a

[@SUPSGARAGE]

Mine still uses R12 brother

[@MOE13576]

Ah ok. Thanks

[@No1steve]

Jesus Is King bro Amen

[@SUPSGARAGE]

Amen to that brother!!! 🙏👍😁!!!

[@MPCTaz]

Frickin sick!

[@MOE13576]

Hey man do you remember how much you torqued the engine mounts bolts(x2) ? And the bolts(4 each side) to engine ? ..loctite?

[@SUPSGARAGE]

I didn't use a torque wrench brother just did it by hand lol and I didn't use any loctite

[@MOE13576]

@@SUPSGARAGE Alright, thank you anyway. Happy early Thanksgiving. Hahaha

[@SUPSGARAGE]

@MetalSlug270 likewise brother!

[@MOE13576]

​@@SUPSGARAGEthank you

[@mdmjared]

How’d you get your fuel gauge to work?

[@SUPSGARAGE]

You have to make sure you keep all your engine grounds brother. One of them are the ones that ground your fuel pump and your gauge.

[@mdmjared]

@@SUPSGARAGEappreciate the response brother

[@leonardlee979]

Your videos are exquisite very good

[@SUPSGARAGE]

thanks brother!

[@kylelanders845]

Did you have to change cross members or use a a different trans mount?

[@SUPSGARAGE]

no I did not have to brother I had a aftermarket transmission mount already but the one from the LS transmission should work just as fine as well

[@Cdbrothersgarage]

Hey man i just swapped an obs and not getting power to the starter, i did exactly what you did with the standalone harness any ideas

[@SUPSGARAGE]

anychance you can message me on Instagram brother sups_garage

[@pmotorsports8276]

Your original heavy purple wire. Mak sure it's on the "S" terminal

[@7claw4]

Do you have to get a transmission cooler

[@SUPSGARAGE]

I didn't mine plugs into my radiator like the original one did and haven't had any issues with it brother

[@xcortesxx5366]

Where did you get the adapters for the sensors

[@SUPSGARAGE]

Amazon brother all the links should be on my description brother to make it easier

[@mtzfilms9837]

What oil filter did you use

[@SUPSGARAGE]

@mtzfilms9837 the one that fits a 03 Tahoe i took off the adapter from the orginal pan and put on the low profile one I have on it now brother

[@dulgar33]

You don’t need to change driveshaft length?

[@SUPSGARAGE]

I did not have to brother it fit right in

[@Iss-Slimm]

Were you able to run the stock 4160e that came in the 95??

[@SUPSGARAGE]

I didn't brother. I ran the one that came with the LS to avoid any delays trying to figure out what I'm needing to make them work together.

[@southtexas4777]

If your new at ls swapping buy a vortec truck instead of tbi. Half the process

[@BigBoss-pj4xv]

How is that bro ? Is the 98 vortex easier to swap ? I bought a 5.3 with the harness and transmission for $300 and I’m planning on swapping it on my 98

[@delzandaniels8269]

I have a 96 and I can’t get the power steering bracket to fit

[@SUPSGARAGE]

can u send me a pic to my Instagram? sups_garage

[@jarianbrass5021]

So did you merge the transmission wires togethwr

[@SUPSGARAGE]

only the one for the speed sensor brother

[@sbickmore15]

Hey bro, do you have the part number for that oil pressure sensor adapter?

[@SUPSGARAGE]

Here you go brother LS Engin Swap Oil Pressure Sensor Adapter M16 1.5 Adapter to 1/8 NPT for All GM LS Engines LS1 LSX LS3 4.2L 4.3L 4.8L 5.3L 6.0L 6.2L a.co/d/9NQbrFV

[@sbickmore15]

@SUPSGARAGE bro you're a lifesaver.

[@SUPSGARAGE]

@sbickmore15 Glad to help!

[@jesusdeleon5596]

Whats the part number for your power steering hose pressure side ?

[@SUPSGARAGE]

I don't know brother cuz I didn't have to replace mine

[@smokechop3599]

What the pin out for rpm Shop didn’t hook it up 😔

[@daonlygunner4945]

what trans did you use? 4l80?

[@pmotorsports8276]

Latter generation 4L60E

[@BryanAlcala-wv6eo]

My o2 sensors aren’t reading any idea what could be the problem?

[@SUPSGARAGE]

which ones did u use?

[@BryanAlcala-wv6eo]

@@SUPSGARAGE borch brand whatever it’s spelled lol and same plug as yours but not sure why but they aren’t reading

[@SUPSGARAGE]

@BryanAlcala-wv6eo I had the same issue then I bought the AC Delco ones on my description and it fixed my issue lol hope this helps brother

[@randyheard5474]

For some reason my ls has a Camaro oil pan and will not bolt up to transmission , stock truck oil pan clear 95 Chevy cross member ?

[@SUPSGARAGE]

the stock one should clear it brother

[@randyheard5474]

Thank you

[@kylelanders845]

And which driveshaft did you use

[@SUPSGARAGE]

just the orginal one that was already on my truck brother

[@jarianbrass5021]

Did you keep OBS pcm hooked up?

[@SUPSGARAGE]

yes I did brother

[@fernandoflores253]

Hey where did you get the harness?

[@SUPSGARAGE]

Amazon brother if u need the link it's in the description 😊

[@fernandoflores253]

Hey where 7:46 did you get the connectors?

[@SUPSGARAGE]

if ur meaning the adapters for the injectors I got them from Amazon

[@jragz_1759]

The link to the oil pan doesn't work. Anybody has a link or part number.

[@SUPSGARAGE]

This one will work as well brother GESEXI 302-2 LS Swap Engine Oil Pan Kit Aluminum Oil Pan Kit Compatible with 1964-1992 Chevy Nova Camaro Ventura Omega F-body G-body LS1 LS2 LS3 LS6 5.7L 5.3L 6.5L Engines a.co/d/cOjdFe5

[@jragz_1759]

@@SUPSGARAGE thank you so much for the quick reply. God bless. I had been looking thru Amazon but wasn't sure which one to get.

[@SUPSGARAGE]

@jragz_1759 No problem brother! and God Bless You too! 🙂👍

[@SHADYPONDMAN]

Clean the bay

[@SUPSGARAGE]

I know 🤦‍♂️ lol

[@ricardoarias1357]

bore us. not possible

[@MidnightCustoms111]

What transmission? Stock 95?

[@SUPSGARAGE]

No it's the 4L60E that came with the 03 Tahoe engine brother

[@MikeJones-dm9lr]

You have the part number for the harness on Amazon?

[@SUPSGARAGE]

Here you go brother ZZCSZ LS Standalone Wiring Harness 4.8 5.3 6.0 Compatible with 1999-2006 GM Vortec Engines 4L60E with Adapter Transmissions Complete Wire Harness for Fuel Injection System DBC Engine Harness a.co/d/0F0Ra8T Also all the other links to the parts are on the description brother 😊👍

[@MikeJones-dm9lr]

@@SUPSGARAGE awesome thanks