How to make 400000V using Flyback transformer | EHT coil | LOT

[@kederelegzyadher4659]

O it dose work🎉😂

[@TechInsert]

Supreb

[@tabm7644]

Nice

[@TechInsert]

Thanks

[@Ifaum]

Will voltage input affect the high voltage output so you can actually control them using potentiometer?

[@TechInsert]

Yes it will affect, Low voltage will burn the transistor.

[@John-pk7lr]

I prefer to use a transformer power supply for this circuit. High amp power supply will be a problem coz of not good oscillation

[@TechInsert]

That is a much better choice than use battery power pack.

[@tabm7644]

That is correct

[@tabm7644]

We can mimic tv circuit for generating 25kv

[@BabuRaj-cs4lk]

@@tabm7644 That might be tough, i feel so

[@tabm7644]

​@@BabuRaj-cs4lkyes we need to check the oscillating frequency.

[@frankiestechvlog7653]

Can you measure that spark using volt meter?

[@TechInsert]

Nope, analogue meter is required

[@gleisonaraujo7216]

Very good 👍

[@TechInsert]

Thanks

[@yamirusero3506]

How long can it last with a constant spark?

[@TechInsert]

I tried max nearly 1min. Then again connect. Like that

[@TechTed1]

​@@TechInsert use cooking oil in a glass jar for the flyback transformer

[@TechInsert]

@@TechTed1 Is that for cooling?

[@TechTed1]

@@TechInsert for cooling also for insulation of high voltage to have a greater rendiment

[@SciTECHGO]

First time it's worked very well.., but after that my MOSFET burnt. Can you explain the reason behind now working on 3 volt.

[@TechInsert]

It should get the right voltage with the right number of turns. Else it will blow the transistor. I lost many and after that it became stable and worked for hours. Those stable circuit is given in the video

[@Elijah-n6s]

Why did the Moffett die with the lower volt and current batt but worked with a 12v 10 Amp power supply

[@TechInsert]

At 12V it has enough back emf to appose the flow of current. At lower voltage it has not enough back emf and that is why high current will flow thu mosfet and will burn the junction

[@7gawzge7184]

If itis high voltage, how can to connect to home appliances ? If directly connected with LED TVs, Refrigerator, no damage?

[@TechInsert]

No no we cannot use this for powering anything. This is very huge voltage with very high frequency

[@TitusKelly-cj8um]

Good one

[@TechInsert]

Thanks

[@szekerespista3758]

How much is the actual frequency and how can be made adjustable ?

[@TechInsert]

This is not frequency controlled

[@szekerespista3758]

@@TechInsert i see that it's no resonant LC tank but how does it work, how much is the oscillation frequency ?

[@John-pk7lr]

@@szekerespista3758 This is not LC or RC type controlled oscillation. This is short circuit type oscillation , i dont know whether it can be called as oscillation? When short circuit the mosfet disconnect the supply to the coil and that time an emf will be induced to the secondary coil. that will create a small trasforrmation flow to the gate coil which will turn the mosfet again switched On. This cycle will continues. That is why if ur giving small voltage than 12V then the mosfet will destroy. That is coz the back emf is not enough to block the current flow.

[@szekerespista3758]

@@John-pk7lr thank you for your response !

[@sureshxaj]

Is it possible to make the arc to reach 4 to 5 inches bro

[@sureshxaj]

How can we increase AMPS from .5 to 6 bro?

[@TechInsert]

With my knowledge it can reach only 1cm. For reaching inches you need even high voltage and high power transformer

[@sambanay4218]

I made one but its not working its gust making my mosfet hot and when i connect it to my battery its just sparking

[@TechInsert]

12v battery and also ur LOT is working fine and not faulty right

[@sambanay4218]

@@TechInsert yeah I gust bought it recently

[@sambanay4218]

​​​@@TechInsertmy LOT is new and also my mosfet I already broke 3 can you help me I tried 22k 680k 100k 220k resistor but nothing work can you help me.

[@hkchzz9199]

​@@sambanay4218bhaai saahab aapko pataa bhi h ki 220 ohm aur 22k me kya antar hota hai. 220 ohm matlab 220 ohm,aur 22k matlab 22,000 ohm. kitna ka antar h kuchhh samajh aaya ab. k ka matlab 1000 hota hai(k=1000). ab 220ohm k jagah aap 22,000 ohm ka resistor lagaaoge to vo to pura current aur 12volt ko rok dega. to aapke circuit me current volt hi nhi jayega to EHT(Flyback Transformer) kaise kaam karega bhai ji..

[@Frag_granade]

How can i solve the mosfet overheating problem?

[@TechInsert]

Increase the gate resitor is one way

[@HichamChahbon-dl4qz]

👏👏👏👏👏👏👏👏👍👍👍

[@TechInsert]

Thanks

[@s.Renius]

Really work aaguma please tell me sir

[@TechInsert]

Yes 100%

[@s.Renius]

@@TechInsert Thank you sir, Tesla coil this method work aaguma sir

[@TechInsert]

@@s.Renius Tesla coil is different technique kzbin.info/www/bejne/l3mTmaCei9iDr7c

[@s.Renius]

@@TechInsert thank you sir

[@s.Renius]

Sir 2k capacitor connect Pannalama

[@roberthudacek]

400000 V ??? originál psychiatria

[@TechInsert]

🙏🙏🙏

[@adrianvilte9636]

400000? no. 15000

[@TechInsert]

Peak 25000v for color LOt and 18000v for black and white lot

[@Brincadeiradahora]

Impossível este circuito alcançar 400kv

[@TechInsert]

Why?

[@AnkurHaldar-u8v]

😂this is uyo chelnn hack

[@TechInsert]

🙏🙏

[@nawazshek6678]

Fake iam try not work

[@TechInsert]

None of the videos in my channel are fake. Do exactly what is in the video. Do not increase or decrease turns. Do not increase or decrease input voltage. It is designed to those parameters only.

[@TechInsert]

Also check ur EHT whether it is faulty or not

[@nawazshek6678]

@@TechInsert how ho check

[@gleisonaraujo7216]

It's not fake! Eu testei e deu certo manézão!

[@experimentroom4286]

Fake I am try not work 😡

[@experimentroom4286]

My wire is 23 swg and 11 to 22 turn not work . please help 🙏

[@TechInsert]

Its not fake , it will work

[@TechInsert]

A couple of questions:- LOT is working fine right? How much voltage you have given? 12V is required by the circuit and anything below will damage the transistor.

[@experimentroom4286]

@@TechInsert LOT Good condition. Voltage 9 amp 2.

[@experimentroom4286]

@@TechInsert transistor is new and attached heatsink. But not work and transistor damage. 😭🙏🙏

[@baburaj1645]

Nice

[@TechInsert]

Thanks