How To Make a 20 Ton Hydraulic Press

[@nickolasbarnes4430]

Hi there. I work in the safety industry and I have seen a lot of ejections with these presses. The larger the press, the bigger the ejection can become. I would highly recommend installing a curtain or shield to protect yourself if you build this.

[@GBWM_CNC]

Thank you for your tip. I actually didn't pay attention for that. I will be careful using it! Who knows - maybe you saved my life, haha

[@GBWM_CNC]

This was a quick project which will help me a lot with the upcoming projects! Let me know what you think! :) Thanks for watching!

[@PCBWay]

Happy New Year!

[@GBWM_CNC]

Thank you! :) Best New Year wishes!

[@bogdanmlody4056]

Spoko robota. Podnośnik można łatwo przerobić by działał "do góry nogami". Kwestia przedłużenia rurki zasilającej pompkę. Mniej zabawy by było.

[@mr.ranyhomemade2466]

Hello my friend happy Merry Christmas 🎁🎄 Very nice to see it under my project too. It very difficulty when I need compressed bearings always hit.

[@GBWM_CNC]

Myślałem nad takim rozwiązaniem ale w końcu sklonilem się zrobić bez przeróbki

[@IceCreams62]

Merry Christmas to you and yours 🎉🎉🍾🍾😊

[@GBWM_CNC]

Best Christmas wishes! 🎄😁

[@JohnSpurrell]

I truly appreciate these videos! The only problem is these are for those with large shop tools and not for the small hobbyist tools.

[@GBWM_CNC]

Well - I've started with a cheap welder and an angle grinder :)

[@stevenpeterson4490]

we all start somewhere, check used tools, classifieds, restore projects. I got a 1950's craftsmen bandsaw for 50 bucks and put about 6 hours into it and runs like a champ

[@FrankGardner-ep9ih]

I started with a cheap welder and a angle grinder, made a slip roller, two steel tables, found a cheap column mill for $600, I was given a lathe(needs a motor, as did the mill) given a belt sander, given a abrasive cut off saw.

[@FrankGardner-ep9ih]

I'm building a press right now. 30 ton. Why I'm watching the video.

[@bosskaggs]

awesome work man. was looking for tips on how to improve my crappy bent store bought H frame, got some great ideas to mod with thanks!

[@GBWM_CNC]

I'm glad it helped!

[@TrPrecisionMachining]

buen trabajo amigo GBWM..felices fiestas

[@GBWM_CNC]

Gracias! Felices navidad Michel! :)

[@jaydensvarc922]

I was hoping to make something like this for my school project and was wondering if there were any plans available for this build that I would be able to purchase?

[@Romanazaur]

Хорошая работа, у меня один вопрос, вам доводилось максимально нагружать пресс, то есть 20 тонн? есть ощущение что швеллер таких нагрузок не выдержит

[@dougkapounek9024]

And a Very Merry Christmas to you And a Happiest New Year.....!

[@GBWM_CNC]

Merry Christmas! Best wishes!

[@jean-pierrepetit3229]

je suis curieux je voudrez savoir pourquoi tu soude des pièces au semi et d'autre au tig quelle et la raison toujours un plaisir de regardée tes tuto

[@dougkapounek9024]

But I was wondering if you put nylon sliders it would stop the paint from scratching off ?

[@GBWM_CNC]

probably it would! though the moving parts could be not painted at all too

[@leniwiec2681]

Merry Xmas everyone 🎄

[@GBWM_CNC]

Merry Xmas! 🎄🎄🎄

[@pawekowalski7469]

👍👍Wesołych świąt

[@GBWM_CNC]

Dziękuję i wzajemnie wesołych świąt i zdrowych :)

[@MdrabbiFokir-zt7uj]

Thanks.

[@IvanGOrtolan]

Any reccomendation on where to source steel? I checked in the cheap online store where I bought pipes and 6 C beams comes at 222€ already.. Are you sourcing from distributors?

[@GBWM_CNC]

Honestly - I just check my local distributors. The steel prices in online stores seems to be high over here.

[@IvanGOrtolan]

@@GBWM_CNC I'll have a look, last time I went to some local stores they were more expensive then delivered from online... Need to find a steel dump where I can find nice big chucks at a bargain

[@witoldhaberla1567]

Gdzieś ty tą nokie znalazł 😜👍

[@GBWM_CNC]

Kupiłem specjalnie na tę okazję! :D Wesołch!

[@MdrabbiFokir-zt7uj]

Please tell me where are your location. I visit here.

[@GBWM_CNC]

Poland over here ;)

[@twicetrader]

Cómo hacer una prensa hidráulica usando herramientas de miles de euros.

[@emanuelj2774]

150$ only Metall without Hydraulik?

[@GBWM_CNC]

150$ was the full cost if I remember right. The bottle jack cost me about ~32$ or so.

[@jamie5000jk]

Thanks for sharing .very nice job

[@GBWM_CNC]

Glad u like it!

[@بايدنبايدن-ق1ه]

صناعة المنشار الذي يقص الحديد

[@kaczaza5]

Gdyby to byla prawdziwa 3310 to by tą prase powyginało 😊

[@GBWM_CNC]

Nie powiem, obawiałem się tego 😁 dobrze ze tylko rączkę wygięło 😂

[@ottoraul]

26:41 Poor Nokia 😒

[@GBWM_CNC]

[*] :(

[@darioenriqueBracamonte]

Hello, I'm Dario Bracamonte, from Argentina. I really like your videos, I see that you drink mate, I am a fan of Mate. I would love to give you a typical mate from my area. I live in Formosa. Do you like bitter or sweet mate?? I send you a huge hug and continue with the videos.

[@GBWM_CNC]

Hello Dario! That sounds great! I always like to try new mate flavours. I usually drink argentinian mate - my favourite is cruz de malta. I'm not sure if I could it describe as bitter or sweet as I don't recognise yerba mate to be sweet at all. I'm glad you like my videos! :)

[@marcelorolle6298]

Sadly, In my country the steel alone cost more than a new press in the box.

[@GBWM_CNC]

Here it would be a similar price - but making my own is always more exciting :)

[@zajonczek4329]

Nice job, but I think test with nokia 3310 is a fake :D

[@GBWM_CNC]

1000% proof

[@waynethomas3638]

kill the music! That reminds me, if you have time to kill, what weapon would you use?

[@GBWM_CNC]

that's some deep thoughts

[@jugalshil-kb5tm]

কত দাম আর আপনার ফোন নম্বর দেবেন

[@hikolanikola8775]

Where do you live when you can buy that much of steel for only 140$?

[@GBWM_CNC]

Poland over here

[@hikolanikola8775]

oh Cool! Anyway, Have you thought about attaching a pump to that hydraulic jack so that you dont have to pump the lever manually ?

[@jadeshaw1867]

​@@hikolanikola8775can buy 1s that attatch to air compressor cheap enough

[@zakaatfoundation9843]

Good job. But u demonstrated a 20 ton press on a simple small bearings extraction...Disappointing.

[@GBWM_CNC]

It destroyed a Nokia. This is the true power!