How to make a 8 Channel Remote Controller

[@AdarshSingh-kg4ft]

Now this something spectacular, out of all your projects this is my favourite, its something creative different than all of those running leds pattern

[@jlucasound]

I think having NO music is a GOOD choice. Also, I find if there is music, on any channel I watch, I will mute the sound. I am sure many other people also do that. When the ads come on, people won't hear them. Keep up the good work!!

[@gilbertojunqueira314]

Your prototyping skills are very good. I am always impressed by your clean work.

[@myidea846]

I like this video, the tutorial method is very good, thank you... the success of your channel continues

[@imugilee1137]

This is exactly what I am looking for. Thank you!!

[@Vallurisrinivas1972]

Super exllent performance 👌👌👌👌 brother keep it up

[@aizazulhassan7780]

which software do you use for simulation ?

[@EMHard-sr1ej]

Anything about the microcontroller programming?

[@estechknowledge]

I haven't used any micro controller on this circuit

[@bobbliss86]

Instead of the keys, can a transistor be used driven by a pulse generator or PWM to control a stepper or simple motor at the receiver end? (With more electronics added at the receiving end)

[@estechknowledge]

This is quite similar - kzbin.info/www/bejne/f5rJYqOEgrerqK8

[@bobbliss86]

@@estechknowledge Thanks for the reply. And another circuit to be filed away! My goal though is to use the HT12E/D system with a steady stream of pulses through one of the channels to have constant control of the speed of a motor while still having the other chanels available for other functions. I am aiming at an R/C vehicle with good control of speed, steering etc. The other chanels would be fun for things like reverse, lights, horn etc.

[@harshalachooa4185]

Can you control 4 dc motor with this bidirectional. Can you explain how the transmiiter work because you use 2 IC encoder .how will the receiver know which IC decoder to trigger

[@haydensuperville1967]

Masterful Indeed!!....

[@roshnigamot]

Sir can I use motors instead of led lights? Please reply as soon as possible...

[@estechknowledge]

Yes, but make sure to add more powerful transistor.

[@roshnigamot]

@@estechknowledge sir please give name of those powerful transistor.

[@roshnigamot]

But sir you can modify this module by adding motors at the place of LEDs @new_video. This will help me a lot and also others who does not know much about robotics. I hope you will make this soon...

[@MiguelDeMarchena]

friend i have found another couple of ics that can make this better TX-2B and RX-2B combining this with ht12e and ht12d you get 9 channels and can remove the switch from the transmitter

[@hemrajraikwar5587]

Can we add motor driver l293d with this ?

[@shigito82]

you can change the IC with TX2B + RX2B and get 10 channel. Just need set the "osc.resistor" to each pair of IC's

[@HASNAIN_VLOGS-1]

❤ thanks

[@cornelichim4661]

How we can make it to work all same time?without that switch. Thanks

[@jumbo999614]

I'm not familiar with PNP transistor. Can you please tell me why on receiver, transistor's emitter arrow direction and LED diode direction is opposite of each other?

[@_Creativo]

It is great! Can you make the leds be motors and change their direction with 2 way switches?

[@advaitpatil4531]

Yes you can Use L293D Ic with these circuit

[@terencesaron]

How much distance will performance this

[@rchandraraosrimanthula5991]

What should I do for increase the range above 4000mtrs

[@marcocampos7995]

Muy buena idea..!!!

[@JoseHernandez-mo5cs]

Buen dia amigo que distancia alcanza el circuito

[@bobbliss86]

Can you press more than one switch at a time?

[@estechknowledge]

4 switch at a time

[@bobbliss86]

@@estechknowledge Thanks

[@RohitSingh-pq8ss]

its 4x2 not proper 8channel😢

[@sonu9999208499]

sir rf 433 module ki jagah esp01 8266 module ko use kar sakte hai . rf 433 module ki range kam hai . pls sir is par video banao

[@x_xsuryavansh]

Is it possible to use this for otors

[@aizazulhassan7780]

can you please tell me the software which you use for simulation

[@estechknowledge]

I don't use any simulation software

[@vallarasuj3143]

How much working distance...?

[@bigbothoee8617]

Why was the switch required?

[@sershinthomas7005]

How many distance will get to the transmitter and reciver?

[@estechknowledge]

100 meters +

[@sershinthomas7005]

​@@estechknowledge how many rupees cost for making this circuit?

[@VEERsciencePROJECT]

Hi bro nice work But one question for u Why using 2way switch

[@eltonnascimentopereira558]

Vc usou resistor de 1/8

[@ajitchavan6676]

Sir Its work but Can i cantrol 5v relay module on it whats the change required in connection

[@weldingtime]

Sir isme muje ek dikkat aa rhi hai jese Agar koi command isko diya jata hai or transmitter riciver ki range se Bahar chala jata hai to wo command continues rhta hai Iska koi solution batao Taki range se bahar nikate hi commands ruk jae

[@estechknowledge]

Ok

[@salmonsadik5809]

Will this still work if i remove the middle switch?

[@estechknowledge]

Watch the full video.

[@ARTWITHAADI]

Can I use any other RF Module?

[@estechknowledge]

Offcourse

[@nileshingle1704]

Can I make 12 channel transmitter and receiver by using 3 ic's instead of 2

[@estechknowledge]

Yes

[@nileshingle1704]

Is sw1 necessary ? Or can i connect transmitter both Ics vdd at a time without using switch ?

[@vinaymathapati6800]

I am making a simple transmitter circuit with an ic555 pin 3 attached To the data pin,but the receiver which is connected to arduino is showing no response. But when i use an arduino to process the signal in the transmitter circuit,the receiver shows good results

[@kannaaramesh6833]

U can control 9 LEDs by adding 9 push button before ic 74147 (decimal to bcd encode) to ht12e in transmitter section. Ht12d to ic 7445 (bcd to decimal) to control 9 leds, I succeeded by my own research. Search these ic's... 74147 and 7445, 4028

[@thariqihsanbachamis9347]

How make a lacth one, what the ic number.

[@EXTREME.MODLE.MAKER.3601]

How many range

[@OfficialDinvention]

Please I need to see the circuit diagram

[@estechknowledge]

Available in the video description

[@man0195]

Control distance howmany

[@khaledabdullah7743]

Where is the daigram circuit ??

[@hammadalizahid5857]

iska kya use ?

[@SteveRaynerMakes]

I would love to see the circuit diagram for this.

[@estechknowledge]

Available now

[@jlucasound]

@@estechknowledge Thank You, ES! 😀

[@dekusquad411]

@@estechknowledge can i use pt2262 and pt2272 instead of ht12d and ht12e for this project

[@arshadramen4022]

@@estechknowledge can you control 6 dc motor with that forward and backward

[@Oleh-do9wr]

👍👌

[@johnvankampen2020]

Hello, nice film, but can you send me the circuit diagram?

[@estechknowledge]

Available in the video description.

[@nayanpatel145]

Plz make studio Toor...

[@المهندسزيدالشراعي]

Please I need the charts

[@dulamahathantila9851]

I watch 1st

[@MiguelDeMarchena]

instead of simple why not make the best possible, is has a lot of applications, i can imagine is combining this with some servos and bldc motors to make a rc robot with 2 tracks a cam and robotic arm

[@estechknowledge]

My budget does not allow me to do so. 😅

[@MiguelDeMarchena]

@@estechknowledge ihave 3 years wishing to make coilgun and my budget is not letting me so i perfectly understand

[@GauravKumar-dr2yk]

I THINK PNP TRANSIATOR IN YOUR CIRCUIT DIAGRAM IS SHOWN WRONG...

[@ghanshyambaraiya4884]

I would love to see the circuit diagram for this❤

[@estechknowledge]

Available in the video description

[@JsTechnical]

Bro how much does it cost ? Can you make this for me. I will pay you. Because I am confused between connections.

[@estechknowledge]

You can find its diagram in description.

[@aizazulhassan7780]

can you send me the simulation if have ?

[@estechknowledge]

I don't have any

[@feargaming9628]

Please give components name in discription

[@gayanchathura3451]

Circuit diagram please 🥺

[@estechknowledge]

Available now

[@Arvind_lofi_world]

Its not working bro😢😢😢😢

[@Xavier_Everwhere]

Why no sounds

[@estechknowledge]

I just want to see the audience retention without music.

[@Xavier_Everwhere]

@@estechknowledge it feels without any background audio

[@Arvind_lofi_world]

I have all the same steps in this circuit

[@TechMonk-x1g]

Bhai iska diagram bhi share kardo

[@estechknowledge]

Available in the video description

[@pushplatasoni7181]

Is this actually work

[@estechknowledge]

Offcourse

[@Xavier_Everwhere]

No audio voice

[@technoideas5835]

How to avoid 2 switches

[@jumbo999614]

He able to use 8 channels because both IC uses different IC addresses. That slider switch let him pick which IC to send and which IC to receive based on the matched address.

[@Vanga_kathukalam]

Bro it's not working 😢😢😢

[@VladekR]

Why 8? 👍👍👍👍👍👍😂😂

[@mdsohelmia4728]

এসব কোথায় পাব ভাই

[@estechknowledge]

You can buy those components from electronic stores or from online stores.

[@Romello_Pietersz]

First show how it works and then show how you build it

[@Arvind_lofi_world]

What i am doing

[@المهندسزيدالشراعي]

Please I need the charts

[@kama05007]

Эти микросхемы, уже слишком дорогие. На AliExpress есть куча разных, готовых вариантов. На разные частоты.