One Channel Transmitter and Receiver with 433Mhz RF module / Sohel Mahamud Rana

This video is to show you how to make a one channel transmitter and receiver with 433Mhz RF module.
for making this you need:-
1. 433Mhz Transmitter and Receiver module
2. Micro Switch
3. 1-10k Resistor
4. LED
5. 2 Antenna
6. 3V / 3.7V / 4V / 5V power supply
Follow me on Facebook:-
profile.php?...

[@pierpa_76pierpaolo]

Interesting. But I am interested in getting more than just a remote led. I want to be able to change the music my neighbors are listening to my liking. Obviously, that is possible but it takes sophisticated equipment that I don't have. I look forward to valuable insights with an explanatory video. I am counting on it . Thank you very much.

[@TheOrlandogonzalez]

excelente video.!! útil, concreto y sin rodeos.! muchas gracias..!!

[@a.s.rtechgaming1099]

Thank you so much. Keep supporting me 💖💖

[@MrDanthehitman]

Thank you for the concise video! I'm hoping to reduce it's range, somehow, to use as a proximity trigger... Haven't got that far so thanks for the head -start! I'm also getting a momentary ON from LED, not sure why but I saw one of your other replies suggesting to adjust the receiver. I'll try that.

[@a.s.rtechgaming1099]

Your pleasure is mine.💖

[@hectorzuta4165]

Buen día, saludos desde Venezuela, gracias por compartir tus conocimientos, EXCELENTE video sencillo y preciso.. puedes por favor hacer un video con lora E32 sin usar Arduino. Gracias

[@a.s.rtechgaming1099]

In future maybe I'll do. Thanks for your comment.💚 Stay with me 😊

[@Bianchi77]

Cool video shot, keep it up, thank you for sharing it :)

[@a.s.rtechgaming1099]

My pleasure 😊

[@MobileBanglaTipsCenter]

বাহ অসাধারণ শুভ কামনা রইল ❤

[@a.s.rtechgaming1099]

Thank you 💓💓💓

[@rafinchowdhury_]

Sir can i use it without antenna....? I've tried without antenna its not working so how should i add a antenna

[@soumetrikya]

Very good video. it worked for me. Initially i used 9v. It did not work. Tried with 5v, it worked fine. Thank you. Just to get clarification. In this video, as per my understanding, the LED is always in ON state. Once the button is pressed, the LED turns OFF just for about few seconds and then turns back to ON state.. Can i have circuit having LED in OFF state initially and once the button switch is ON, the LED should turn ON. Later after the button is released, the LED should OFF. Can this be implemented using single channel or should use HT12E and HT12D ic's?

[@a.s.rtechgaming1099]

If you want to use single channel then you don't need to use any ic. But if you want to make it 6 channel then you need HT12E and HT12D ic.

[@ajaymurmu4166]

What is the maximum range

[@tinohernandez1977]

Hello, can I use the same transmitter for three receivers? Thank you?

[@hafezimdadullah9056]

Wow

[@communistcomrade9698]

Hi, i wanna know what is the range of the circuit, thanks, ur video is cool i wanna try out this project lol

[@a.s.rtechgaming1099]

10-100 meters

[@devrajput2439]

Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?

[@a.s.rtechgaming1099]

check your receiver

[@jorgesuarez3368]

Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?

[@sakshamvaidvaid910]

Sir if we do over soldering on rf reciever then it will work or not

[@a.s.rtechgaming1099]

If circuit connections are good then it'll work.

[@ambreentabassum2464]

How to add this antenna? It can be any wire with any length?

[@Labibatuabubakar4]

Please Sir is it necessary to include encoder and decoder ic HT12E and HT12D ?

[@a.s.rtechgaming1099]

if you want to make it 6 channel then you have to use encoder and decoder ic

[@PBanduni]

Sir iski range ke beech mai koi object aata hai to ye kam krega ??? Like smaller hill either other item

[@a.s.rtechgaming1099]

Range will decrease

[@PBanduni]

@@a.s.rtechgaming1099 okk thanks dear

[@sholibas9568]

How about for a wireless microphone

[@guitartronics]

Hi, how I can use the same module only for conductivity not to power a led? Thanks in advance!!!

[@a.s.rtechgaming1099]

It's not for conductivity. It's only for power up electronic as like led, motor etc. and control it wirelessly. Thanks for watching 💖

[@user-ii6vb8ho8p]

Good For how far it works

[@a.s.rtechgaming1099]

10-100 meter

Broo is key range kia hai meter may

[@hernanhernandez8562]

En vez de un foco, se puede conectar un mini motor?

[@a.s.rtechgaming1099]

please speak english bro

[@djsutej9013]

Can We Use this Circuit For Making Wireless Microphone

[@a.s.rtechgaming1099]

nope

[@codewithdoge]

50 meter ki range pane ke liye kitna volt ka supply de ya kya kare

[@a.s.rtechgaming1099]

7 volt+ , also use long antenna

[@Justinzac100]

The LED connected to my receiver keeps blinking even when no transmitter signal is sent. I connected it the same way as it is in your video. How can I fix this?

[@a.s.rtechgaming1099]

Adjust the pot on receiver

[@jakubtoporkiewicz9504]

I have a problem. So, i built it but the receiver output is 4V. When I hold the button it drops to 1V for a second and then back to 4V. Any help?

[@a.s.rtechgaming1099]

Adjust the pot on receiver

[@planesnstuff9575]

Im gonna use this for morse code but if anyone has links to where i can buy these parts that would be amazing

[@a.s.rtechgaming1099]

Here is your link:- BDT 110.11 | 433MHz RF wireless receiver module & 433 MHz transmitter module kit + 2PCS RF 433M Hz Spring Antenna compatible for Arduino a.aliexpress.com/_mKR0X6U

[@danielortegapalomo3575]

Qué distancia máxima puede funcionar?? Gracias

[@a.s.rtechgaming1099]

Speak english please

[@khadouja3380]

Can we use this circuit for making wireless Webcam

[@a.s.rtechgaming1099]

No

[@0x6900]

Is it possible to use LORA module without Arduino, in same manner ?

[@a.s.rtechgaming1099]

search on youtube

[@0x6900]

@@a.s.rtechgaming1099 I didn't find anything like that, without Arduino. And it's reason i asked you !

[@a.s.rtechgaming1099]

@@0x6900 it's actually not possible. eyes on if somebody figured out

[@Tlgamingz]

Can I use motors instead of led please reply

[@a.s.rtechgaming1099]

You need a transistor if you want to use a motor.

[@RakeshSingh-xg4io]

Make a rc car from this circuit

[@a.s.rtechgaming1099]

okey

Broo risister ka is maa kia kam krta hai

[@sakshamvaidvaid910]

Sir i do similar like you but it does not work but i use only 1.5V cell or battery

[@a.s.rtechgaming1099]

Minimum voltage 3.7v

[@kamleshchavan7451]

Can u explain the working of the circuit diagram and function of every components used in the 433 Mhz RF transmitter and receiver module

[@a.s.rtechgaming1099]

what do you want to know???

[@kamleshchavan7451]

@@a.s.rtechgaming1099 firstly thanks for the reply, step by step working of the circuit diagram of the transmitter and receiver module, u have used , function of the component used in the circuit diagram

[@a.s.rtechgaming1099]

@@kamleshchavan7451 unfortunately it's not possible to explain everything in comment box, you can search on KZbin or google for it. hope you will get your answer

[@kamleshchavan7451]

@@a.s.rtechgaming1099 sir matter of fact is I tried a lot but I didn't get anything, just hoping you may help me out, thanks for the reply sir

[@kamleshchavan7451]

@@a.s.rtechgaming1099 do you have any video on this

[@naveenrajyadavji5875]

Kya antina silver wire ka chal Sakta hai

[@a.s.rtechgaming1099]

yep

[@naveenrajyadavji5875]

Thanks,but what is means of yep

[@a.s.rtechgaming1099]

@@naveenrajyadavji5875 wlc😊

[@a.s.rtechgaming1099]

@@naveenrajyadavji5875 google it

[@kottali.deepaknaidu9044]

How can I do this with 9v batteries

[@a.s.rtechgaming1099]

use converter

Bhia resister is may kia kam kray ga plz ans Plz ans

[@a.s.rtechgaming1099]

for the circuit safety from over voltage

@@a.s.rtechgaming1099 ok

[@anandhukrishna448]

Can i use 1K resistor?

[@a.s.rtechgaming1099]

Yep

[@primeseriesnik9368]

Which resistor you use

[@a.s.rtechgaming1099]

1k

[@driss25]

Add one relay

[@a.s.rtechgaming1099]

Thanks for your suggestion

[@nagavel3776]

Can I use a normal switch instead of a micro switch

[@a.s.rtechgaming1099]

yep, you can

[@nagavel3776]

@@a.s.rtechgaming1099 could you please explain how the circuit works. I followed the same steps but all I could get was an blinking led

[@a.s.rtechgaming1099]

@@nagavel3776 adjust the receiver node

[@nagavel3776]

@@a.s.rtechgaming1099 oh okay I'll try that, thanks. Also is there any other means of contacting you if I get further doubts. Would really appreciate it if u can help me as I am a beginner

[@a.s.rtechgaming1099]

@@nagavel3776 you can contact me on facebook. Link in description

[@g.dhinakaran5581]

Continue Led blinking why

[@a.s.rtechgaming1099]

Use long antina

[@shivkumarvishwakarma3589]

Rc car me keshe use kare ge

[@a.s.rtechgaming1099]

you have to use encoder and decoder ic, HT12E ana HT12D

[@rajujidigitallife5356]

Sar ji hamen RF module chahie kahan se milega

[@a.s.rtechgaming1099]

Search on Amazon

[@viratsoni1454]

Bro it work with out antena

[@MrDanthehitman]

He's just increasing it's range but yes, works without if you're not close range.

[@deepakbs8445]

If we give 3.7 v how its range

[@a.s.rtechgaming1099]

20meter, but it's depends on your antenna also

[@deepakbs8445]

I do this but it is do not working What is its problum😔 Can you say

[@a.s.rtechgaming1099]

@@deepakbs8445 check your connection again

[@deepakbs8445]

@@a.s.rtechgaming1099 Ok👍👍

[@muhamadamirul5393]

what happen if u don't put antenna? Does it will not work?

[@a.s.rtechgaming1099]

In that case you need to put the transmitter and receiver too near. The antenna is for increase range.

[@muhamadamirul5393]

Thanks 👍

[@funnyexperiment1576]

Kitne metar pe kam karta he

[@a.s.rtechgaming1099]

10-100 meter

[@bhagavathym6933]

How to make Antenna sir

[@a.s.rtechgaming1099]

take some copper wire and role it

[@saadahmad9307]

can i use a buzzer instead of led ?

[@a.s.rtechgaming1099]

yep

[@a.s.rtechgaming1099]

yep

[@saadahmad9307]

brother i use led in that project but my led is continuously blinking and not working can u guide me ?

[@saadahmad9307]

please share your email so i will able to contact u personally

[@a.s.rtechgaming1099]

@@saadahmad9307 adjust the receiver node

[@ajaymurmu4166]

What is the range

[@a.s.rtechgaming1099]

10 to 100 metre. Depends on voltage.

[@user-eb4eg9nn9k]

what about distance!!

[@a.s.rtechgaming1099]

10-100 meter

[@primeseriesnik9368]

10kohm or 1kohm

[@a.s.rtechgaming1099]

1k

[@kottali.deepaknaidu9044]

I have only 9 v batteries

[@a.s.rtechgaming1099]

5v maximum

[@Thelittlekidstv857]

Range Kya hai isaki

[@a.s.rtechgaming1099]

10-100 meter

[@shivkumarvishwakarma3589]

Or dorne me

[@tntomega]

I try this before and sorry this is fake! This modules not work on regular voltage you must use encoder and decoder chip or ne555

[@roniahmed8438]

Wow

[@a.s.rtechgaming1099]

Thank you ❤

[@jorgesuarez3368]

Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?

[@a.s.rtechgaming1099]

Adjust the pot on receiver

What is range in meter

[@a.s.rtechgaming1099]

20-200 meters (different voltage, different results)

[@0x6900]

@@a.s.rtechgaming1099 How much voltage needed for 220m range ?

[@a.s.rtechgaming1099]

@@0x6900 it's range 200 meters max. you can use 5v and a long antenna for maximum range

[@0x6900]

@@a.s.rtechgaming1099 Which is best 433 Mhz transmitter/receiver available in market ?

[@a.s.rtechgaming1099]

@@0x6900 you can go for RXB6 RF module