How To Make A Crosscut sled for homemade table saw

This time I'll make crosscut sled for my homemade table saw. This sled will have different and simple design from others, but will cut very precisely too. It's my interpretation - how to make crosscut sled and don't loose cutting height.
How I made this table saw: • How To Make A Homemade...
How I made a fence for table saw: • How To Make A Table Sa...
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

[@pianostyle1005]

i was thinking of this exact thing. You have laid it out for me. thank you.

[@welldonetips]

Piter P was asking about upgrade, which is visible under the table. After I build a table saw, I decided to add some more strenght to hold circular saw engine. This support was made from simple 8mm threaded rod and some scrap wood. Attached rod under the table and with washers and nuts fixed circular saw in place.

[@sabosaban8873]

Well Done Tips

[@marioalbertoayalacastellan8278]

Well Done Tips

[@marioalbertoayalacastellan8278]

well Done Tips you have a picturs of the rod

[@camilloventurelli7793]

Well Done Tips .

[@pamelaallen6543]

Thank you so much for the table saw tutorial and the cross cut sled. I can't afford a table saw, but I can sure make one thanks to you.

[@kirriekiwi]

Very well done,i am modifying my old steel topped bench as it is to heavy for me to push around so you have given me some good ideas, thanks for that

[@juliodanielalbarracin3668]

simple, economical and efficient excellent !!!

[@lucamura8362]

Absolutely the smartest sled on the tube! Well done!!!!

[@rmmnet]

Just found another HERO. Well done. I shall proceed immediately to construct both the Table Saw and Cross Cut Fence Thanks RMM.

[@rudymartinez999]

Excellent, easy and pretty useful!!!

[@gregorycharrier3087]

"That's what I call well done job"... me too pal, me too. Very nice series on that simple table saw! Cheers

[@artofnoly9754]

Compact, cheap, and effective! 3 out of 3!!

[@anthonytaylor6932]

Great Job! I like your ideas and videos. One thing though. Im going to add a stop on my cross slide. So the slide doesnt cut all the way through the slide and cut my hand. Just in case. Its better to be safe

[@blaze9215]

Of all that I've checked out I like yours best. Made one in the past but I had to put too much time and effort into it. Yours is simpler and even more efficient. I will make it probably tomorrow. If it don't rain. Thanks !

[@oscarm2444]

PERFECT..!!! what I was needing was a sled with an external lateral guide...and not also sacrifice cutting height..Thank you so much !!!

[@rinosylvano2343]

Your sled more make sense, more easy...!! Good job bro...👍👍👍

[@earlselling9183]

Perfect for easy cuts made the same sled.. brilliant idea.. thank you.. keep up the good work

[@AMonteioism]

Beautiful and simple work. Congratulations.

[@jorgeruz5173]

GREAT JOB EVEN MY TABLE SAW IS DIFFERENT I AM GOING TO TRY IT

[@Gravy_Master]

Easy does it Jorge.

[@AMonteioism]

Super, easy and beautiful work. Well done. I learned something positive. With a very good explanation.

[@tommyshwartz9682]

Props for the vid! It finally helped me figure out something I was stuck with. I haven't started with Hyezmar's Woodworking Bible yet, but I googled and downloaded the book. Looks fun too!

[@francesluck6597]

Beautifully simple neat solution. Many thanks for your video.

[@Shujashaher]

Simple &easy. I made a similar table saw. But unfortunately the saw was slightly askew. so I can not make such simple sled.

[@RetiredTony]

PERFECT...thanks for the video

[@nextwayeducrafts5567]

That was simplest crosscut sled ever made by any. Great work!

[@Mohamedyoussefseoud]

Really, It is a well done job. I will apply this to my table saw with minor addition. I will fix two small pieces of wood to the back side of the sled at each side end. These two pieces should be extended (one or two cm.) underneath the table . This will prevent flipping the sled. Thank you for this simple but great video.

[@brianmorris8045]

+youssef seoud: Good idea there...and a much smoother slide too. I love the translator he used...very effective.

[@JULESBUMSTEAD]

+youssef seoud i agree. i did notice it lifted slightly . i think thats what i woill do too.

[@johnrolfe9877]

juliet bumstead h

[@KBBAKTHA]

i can only say, "really well done" thanks for sharing

[@Alumaks]

Simple and very functional. Will try to implement

[@cesarmendes4485]

Foi o melhor e o mais prático que já encontrei. - Obrigado.

[@mmarkbantawa6652]

After watching good numbers of videos, this is very satisfying! Keep it up!

[@oddunjulang]

I will give it a try thanks so much for that idea.it looks simple and great. I think I can manage to build it.

[@markevans3779]

Good idea.....although the cuts don't look square in the video....I think the sled is so simple to build, that a few minor adjustments wouldn't be difficult.... thanks for your video

[@tamdaonguyen8486]

simple, fast and smart. I like your video. Thanks for your sharing Bro

[@gentlemensedge5503]

I see what you're doing. Nice job and great video. I think I will go off your video and make a table saw. Thanks for the vid and I will keep watching to see if you have a fence idea!

[@abahsaman2987]

alat potong besi/cutting dibuat potong /belah papan

[@lynsarver7899]

THANK YOU, I've been looking to make a SIMPLE sled finally!! thank you

[@garywilliams3412]

Excellent video. Great imagination to solve the problem of having a crosscut sled for a homemade table saw. Thanks.

[@joytoll5888]

Thanks for the great video. This is exactly what I needed.

[@darrenhalkett2092]

that's pretty cool man right on (y)

[@robertedulan906]

Very simple yet very effective, thanks for sharing this video....

[@Piterworkshop]

Is a very good job but.... what about the upgrade we can see under the table? May be for let the saw perfectly perpendicular? Thank you for share this and sorry abouth my english.

[@anothername2021]

thank a lot, very helpful with me.

[@utilymoveis2229]

Muito bom, simples e funcional! Parabéns e obrigado, ajudou muito

[@eduardobeltran2754]

Simple and very useful jig. Excellent idea. Thanks a lot. I suscribe right now...

[@wiratphetdenlarp2390]

่

[@whendtellsdetails2052]

Sophistication is the ultimate simplicity

[@sor5924]

Greate!!! Easy,fast and accurate. Nice job.

[@husseinmostaf]

Really good.I'm really enjoying it! thank you

[@carlosvillamares4850]

Excelente , continúa haciendo ese tipo de videos para principiantes 👍

[@edkinsel3553]

Thank you! Just what I needed.

[@ISOPOINTQCS]

THANKS FOR THE SIMPLE IDEA AND PRO DIRECTIONS.

[@honestbob45]

very helpful video! thanks.

[@Paoson_Woodworking]

Nice and inexpensive! Well done

[@micheldupaul7768]

Very bright, thank you !

[@anoshya]

Very good ..you explained it very simply and the film was easy to follow..Many thanks

[@sab605]

Very nice job. Thank you for posting this video.

[@richardkandalec4128]

You could screw on a little stop block on the edge of the table so one of the end supports bumps against it to prevent the sled from going too far past the middle of the blade.

[@duczman76]

👍 simple,but precise.i like it not too complicated

[@brianatkins4679]

well done, will make one.

[@josephcanoneolazaro1942]

good job sir here in phillpines im trying now making my homemade table saw before the lockdown ends thnks

[@sujaykadam6510]

I want full information about this machine working specifications etc where I get this?

[@slam1411]

Simple but effective, nice job :-)

[@morenomedina366]

Duncan mieble

[@waguinbrooklin]

Prático demais principalmente para quem não tem tupia para fazer rebaixo no tampo da serra... Tá aí uma opção. Obrigado pelo vídeo!

[@rabiakhneifes4957]

very nice ,, try to add bearing in the edges insteaf of wood !! it will run smothly.

[@thetwogardens6048]

Just about finished my table saw. Not much to it really. Might make it a router table too. Thanks for the video !

[@TheDublin47]

If i were you i would make the runners out of hard wood They are less likely to stick also add wax to the sides of the runners But a very efficient little crosscut sled Well done

[@martyjames6204]

very helpful - thank you

[@arvindh13]

great idea

[@darrenstockton578]

thanks for sharing this i have a circular saw which i am now going to make a table saw with again thank you

[@jeanmassing6872]

Very nice and inexpensive. Well done.

[@aliateeq4694]

great idea, thanks a lot.

[@hassanelnaggar1985]

*فكره ممتازه تحياتي من مصر*

[@carlosaleyo]

Great and easy, I'm building it for myself

[@Anonimus-hv6xr]

Very good idea 💡congratulations!

[@contreeman]

i see a table saw in my future GOD BLESS

[@carlosjavierlauck]

Muy muy facil de hacer, excelente!

[@terryrobinson3016]

love your ideas can you tell me what make of saw you're using. Regards Terry

[@rodrigoortiz1948]

nice and symple idea , thanks

[@efrainmartinez4912]

Great job!

[@donquicovelez]

Great, thanks.

[@shayroche]

Thanks Well done tips

[@rellymendoza9401]

very simpliest DIY project I like it

[@paulodeassis7775]

Well done, boy!

[@godfreykalenge7118]

from Tanzania i Like to know more about making table saw by using router mashine good Job my Dar friend

[@TheAlexwilker]

Thnks. this is what i was looking for.

[@luisestevesirvent2990]

¡Qué buen diseño para sierras de mesa caseras!. Sin necesidad de ranuras en la tapa.

[@obedmdluli5110]

Your video is informative. Thanks for your tips.

[@onksmedia]

best video thus far

[@edgarbenitorosasmatheus6699]

Excellent work!! New follow!!! From Venezuela!!! Sorry for use google translate!! A hug!!!

[@tonyroldan3477]

Very nice and easy to make!,,Thanks

[@MuraliMadupu]

superb well done just I love it and thank you so so so much.

[@SidRaj10]

What a channel I came through. Thanks a lot for ur work. Best wishes from India. A lot to learn and share. Dhanyavad !

[@fayiznalu8411]

Good job 👍

[@mrfixit2910]

Good job bro

[@carloseduardocarmonaortega6915]

Well done!

[@AlexGarcia-ot9ly]

when can you make the fence?

[@jamaleldinkhaled9649]

Perfect.. Wil done😍😍😍

[@ozanli_Gen6]

Sağol Usta, halal olsun! Like from AZE 🇦🇿

[@moulindubarma7901]

Will telescopic channels for drawers be used on side of table to run the sled smoothly?...never saw any DIYer implementing it

[@Ketzalkoatlicue]

FELICIDADES, SALUDOS DESDE MÉXICO.

[@ravivirmani8725]

So simple and nice solution

[@Thulahandcrafts]

Neat, nice idea

[@chinescalador]

MUITO BOM ! PARABÉNS.

[@raghunath97]

excellent, thank u