I show you how to make a custom fiberglass subwoofer enclosure like the one I built for my MK6 Golf R. Josh's Insta: / stew_mk7 My Insta: tmw.sixr?h... Music: - www.epidemicsound.com/music/f...
Пікірлер: 110
@pourlafamille3 жыл бұрын
The old guy that helped in this video looks like an OG baller! Nice video. Great tutorial on a custom fiberglass sub box build.
@TMWYT3 жыл бұрын
Yeah he’s dope
@Ribal1 Жыл бұрын
Pops was a plus making it legit🍻👍
@CraigWedd4 ай бұрын
came here to say... shout out to pops.. im guessing its pops lol
@gamecock246510 ай бұрын
Nice build. I don’t know how you tube knew I was thinking about doing this in my VW, I haven’t searched this topic at all.
@TaserTheSnake2 жыл бұрын
Dude I was stressing my build and building a small form fit mdf box and found this vid gave me total confidence to make fiberglass and put a bigger sub then originally planned thanks!!
@TMWYT2 жыл бұрын
Glad I could help!
@gktpictures60693 жыл бұрын
Defo doing something like this when i buy my mk6. Great tutorial
@TMWYT3 жыл бұрын
Thanks man! Do it!
@Austin_Hart8 ай бұрын
I know it's been a while but good job youngblood. Smart way of doing things. If you had this customed it would have broke the bank.
@alexluna78106 күн бұрын
Nice job guys 😍
@LuisGarcia-sb8ur3 жыл бұрын
nice job man keep up the god videos love the chanel much love from mexico.
@TMWYT3 жыл бұрын
Thanks man!🔥
@Dizzy9518710 ай бұрын
How did you get the proper air space measurement?
@jacksonwalton43723 жыл бұрын
Best build yet
@TMWYT3 жыл бұрын
🔥🔥🔥
@parkerwalton99503 жыл бұрын
dude, you're famous!
@dee1380 Жыл бұрын
nice!!
@2ZH Жыл бұрын
How's it going? I'm new to all of this. I have a 19 GTI and was wanting to put a subwoofer in. What would be a good size? I don't need to have anything crazy, just enough to have fun with. Been looking at Kicker 48TCWRT102 sealed enclosure with single 10" CompRT 2-ohm subwoofer and passive radiator, but I don't know much....
@bryanviper3 жыл бұрын
Looks good, I did the same Fiberglass enclosure in my R a few years ago but did not make a box/flat look like yours in the front. Also have my amp hidden under near my spare tire.
@TMWYT3 жыл бұрын
Sounds dope
@zamarilanzainalabidin867 Жыл бұрын
How long you take to finish the installation of the subwoofer?
@pyrothepenguin3 жыл бұрын
Were you worried about the heat from the fiberglass resin effecting that wiring loom? Does it not get too hot to melt the sheathing of those wires? Love the look and considering this for my 2013 Jetta Sportwagen Tdi unicorn. Looks great!
@TMWYT3 жыл бұрын
If you use the correct size wire is does not get hot :)
@Petrolhead668 ай бұрын
How did you attach the mdf to the fibreglass
@cliftonstrickland1322 жыл бұрын
How did you wire it
@user-dy9zy5kr5p3 жыл бұрын
Красавцы 👍
@syounas46773 жыл бұрын
any advice how to fit a typical wooden sub stealth box so it does not fall down into the same location as yours. Thanks
@TMWYT3 жыл бұрын
You can put the box wherever you’d like! Custom made or not.
@matthewlampert44 Жыл бұрын
Subs clipping hard but I just bought a mk7 and love the build I'll be copying it smart man smart
@TMWYT Жыл бұрын
We adjusted it, sorry for the poor tuning 😭
@kippkewish9626 Жыл бұрын
How long did the whole process take
@TENNESSEETRACKHAWK3 жыл бұрын
How did u get the cut out box to fit securely in the shell? Whats stopping it from falling in?
@TMWYT3 жыл бұрын
The wood face is secured to the fiberglass shell using bondo-glass, it’s a mix of bondo and fiberglass. It holds it like cement and seals off all gaps for an air tight box
@TENNESSEETRACKHAWK3 жыл бұрын
@@TMWYT Ok Great Bondo-glass thanx for getting back I really appreciate it. Im gonna try to tackle this project myself and will be using ur video to do so.
@4GuitarTrance3 жыл бұрын
Love the wheels on the black GTI. Euro customers usually only get those types of wheels. How did he get those wheels? I don't know why, but I think they make the GTI look pretty nice compared to the standard GTI S model wheels (the blade-style wheels).
@TMWYT3 жыл бұрын
OEM MK7 Golf R wheels were on the car when he bought it! They do look very cool on the GTI, especially since they’re 19s
@gamerslushey38962 жыл бұрын
Nice work if you can give more list of things used like fibre glass resin mats and staff really appreciated.
I’m inspired. Just called US composites to order resin, resized I don’t know how much to get. And two gallons is significantly more expensive than one - they ship separate and have a hazmat fee. How many gallons of resin on this?? My build will be similar
@ari1234.3 жыл бұрын
So the red vynil was applied over the carpeted wrap? Nice
@TMWYT3 жыл бұрын
Yes!
@043JITAEC Жыл бұрын
Love the work gents Big Ups ,im just wondering on how it would look on a Polo Vivo Maxx
@TMWYT Жыл бұрын
Thank you! Only way to find out is to do it!
@hellaflushhonda2 жыл бұрын
You guys are from Utah??? I’m from Idaho I’ve got a mk7.5 golf R I’d love help with doing this to, I would definitely make the drive over to you guys
@mayelo9378 Жыл бұрын
good idea, and cool color just the only problem that you had to cut the base the floor that you shut made shorter the box to do less invasibe to the car at the time qhe you want to sell it
@dbosnow2203 Жыл бұрын
Quick question! I applied the masking tape and the layout earlier today and I want to complete the job tomorrow so please get back to me at your earliest convenience! My question is did you guys use multiple layers of Fiber Mat or just the first then multiple layers of Resin? It's my first time doing so and I want it to come out good. Thanks
@hellaflushhonda10 ай бұрын
Cut out small squares of the mat, then lay some resin place the mat and do a layer of that, then do it enough to do like 3 “layers”
@rafiqfrieslaar8592 Жыл бұрын
Not sure if I missed it in the video, what size subwoofer did you guys install? 12” or 10”?
@TMWYT Жыл бұрын
12
@s.l34823 жыл бұрын
Does the floor still open up to access the spare?
@TMWYT3 жыл бұрын
Yes it’s all custom you can make it do whatever you’d like. He just lifts up the floor to access the spare!🔥
@azf94344 ай бұрын
Couple of questions…. How does it stay in place once its done? Can it be done on both sides? And does the box has to have any sort of hole for the sub to release air?
@TheFreesabin4 ай бұрын
yea , can be done in both sides , but use some brace inside and a thick frontplate :D . u can bold the box from the inside .
@adriansindieshit81392 жыл бұрын
I’ve been looking for one to buy instead of having to make one on eBay and google, any recommendations? Budget friendly maybe ? 😭
@TMWYT2 жыл бұрын
If budget is your goal, follow this tutorial and make one!
@TreyJa2 жыл бұрын
What’s the volume of the box, I have to do this for my mk6 gti.
@TMWYT2 жыл бұрын
Can’t remember the volume but I know we built it to the specs of the sub!
@elitedragonmaster24873 жыл бұрын
About how much is it in just materials and how long did it take you , I wanna do this to my Mk6
@TMWYT3 жыл бұрын
I’d say about 100-150$ depending on size, and takes 2-3 days since the fiberglass needs to cure for 24 hours
@camrsconv7 ай бұрын
Nice job, went though the previous comments, no details on figuring out the air space for the speaker, that is where the real calculations comes in and would be useful to KZbinrs. Also no video of pulling the fiberglass mold out of the car, again would be useful to speaker box builders.
@uveshanchetty279 Жыл бұрын
Does fibre glass box sound different to a wood made box ?
@wanderbread4217 Жыл бұрын
its not as good as a box but still good none the less
@Alancen13 жыл бұрын
What did you use to glue the wood face to the fiberglass?
@TMWYT3 жыл бұрын
Bondo-Glass, its basically bondo mixed with fiberglass strands and resin.
@jlilly81443 жыл бұрын
@@TMWYT Did you put it inside and outside or just outside? I would be concerned just doing it outside that it still might push in.
@TMWYT3 жыл бұрын
Just outside, the face was a pretty tight fit already, bondo glass cemented it into place for eternity. Months later box is is still doing great :)
@beekaye14962 жыл бұрын
How does it sound verse a ported box?
@TMWYT2 жыл бұрын
Less air movement, better response
@bradlisa59512 жыл бұрын
What are you using for highs?
@TMWYT2 жыл бұрын
Stock fender audio
@teranoens82285 ай бұрын
What was the point of cutting the plastic on the gti?
@downhillskier72 жыл бұрын
JBL BassPro Hub or Cerwin Vega VPAS12ST Power Subwoofer fit in the spare tire 6.5” tall. JBL Stadium Bass Hub Spare tire subwoofer if you want to use your own amp. Cerwin Vega VPSTX12 12” 600W 150rms compact spare tire subwoofer 4.7” tall. Rockville RockGhost Hidden subwoofer 5.7” tall
@TMWYT2 жыл бұрын
That’s rad! We wanted something bigger then the tiny space available within the spare
@TENNESSEETRACKHAWK2 жыл бұрын
Any idea how much that box weighs? I was thinking of going with the Focal Utopia MW10 cause it has a really foot air space requirement but im building a race car sorta so weight is a concern. I think the sub weighs 17 lbs any idea what the fiberglass setup with MDF weighs? Thanx. Its going in this with Audison Thesis 3 ways up front. Unsure on amp/dsp yet. kzbin.info/www/bejne/g5Waq2mCYr2Lh68
@TMWYT2 жыл бұрын
Sounds like a rad setup man! I’d say around 40-50lbs now that we have 12 inch in it. If you are going for weight savings for track/drag days I would just make the sub/box/amp all quick disconnect so you can easily remove when needing to drop the extra weight! Then when your just driving around town you have good bass.
@TENNESSEETRACKHAWK2 жыл бұрын
@@TMWYT Awesome thanx. Good idea i will look into something like that.
@jgaudio69 Жыл бұрын
Am I mistaken and you did hook up both sides of the sub?
@vincentsimmons19457 ай бұрын
I didn't notice a second set of wires it either. I only saw one wire from the speaker. If that is true, you're only using one voice coil of a dual voice coil (dvc) sub.
@luisbravo45013 жыл бұрын
I’ve been thinking about the same thing just haven’t had time to get to it. Wondering if you guys have make me one and ship lol jk but still nice clean look!!
@TMWYT3 жыл бұрын
Thanks man!🙌🏻🔥
@amrelics43983 жыл бұрын
i recommend u to do a nissan gtr build its 🔥
@TMWYT3 жыл бұрын
GTR coming to the channel soon!!😏
@iaminevitable67912 жыл бұрын
Should have shown how well the sub floor(spare tire compartment cover) comes in and out after sub brackets are screwed into place. Get a flat tire then can't get to spare tire.
@TMWYT2 жыл бұрын
its a little tricky to get in and out, but he doesn't have a spare anymore so doesn't matter
@cliftonstrickland1322 жыл бұрын
With the premium with the fender audio
@TMWYT2 жыл бұрын
We deleted the fender audio subwoofer that was inside the spare tire, cut the signal connector plug off and connected it to an LC2i which then converts amplified signal to our RCAs that connect to the AMP. Dealing with the Fender Audio system has been tricky and we are still trying new ways to make it work the best, but we have decent subwoofer levels as of now.
@brackonwebb43933 жыл бұрын
How did he wire it? Drop line?
@TMWYT3 жыл бұрын
He has the fender audio upgrade from the factory so we used the wiring for the stock sub in the trunk for the signal.
@bigbrosaul3 жыл бұрын
@@TMWYT how did you pull the signal from the wiring harness? I'm trying to do the same thing with adding a amp. Just need signal from the harness
@tomp3978 Жыл бұрын
Is this lighter too?
@TMWYT Жыл бұрын
Weighs about 40lbs
@sakimall51783 жыл бұрын
It reminds me of nfsug2 car trunks
@prot0type903 жыл бұрын
all that work and u used 1/2 mdf, thats a bass killer, 5/8 minimum next time 😁
@TMWYT3 жыл бұрын
Thanks for the advice man I’ll look into it!
@love2hate1323 жыл бұрын
Why put a ported sub in a sealed box?
@TMWYT3 жыл бұрын
Subs are subs. There’s sealed enclosures or ported enclosures. You get better sound and response from a sealed box, but you get more low frequency bass volume out of a ported box. Just depends on what you’d like to do. My cousin wanted a setup exactly like mine so we built a sealed box.
@jlilly81443 жыл бұрын
@@TMWYT Exactly. I used to own some killer JBL home speakers that could either be used ported or not simply by pulling a foam plug out or leaving it in. Really wish I hadn't sold those speakers years ago. They sounded fantastic. Nice build, guys!
@terryreyes11252 жыл бұрын
Lmao he called a sub a ported sub 🤣🤣🤣 obviously knows nothing about subs
@shaanseera13873 жыл бұрын
"booshie"
@TMWYT3 жыл бұрын
Exactly 🤣
@Big_Tr332 жыл бұрын
Def needed a hole to let that air out haha
@TMWYT2 жыл бұрын
It’s a sealed box so no we don’t need one
@Big_Tr332 жыл бұрын
Wouldn’t it have helped with the effectiveness of the sub ? Maybe I’m misinformed about subs .
@pejagaming327 Жыл бұрын
bro the car already has a factory sub
@bradlisa59512 жыл бұрын
Red light on amp is on, not good! It's called clipping light, it means your distorting your speaker.