How to make a Digital Fuel Gauge With VTS

[@pankajsharma-rd1ep]

Hi, can I get to know the level of petrol stock in the current model

[@radhikalampuse464]

Hello, We are implementing this project as a part of our engineering final year project. However, we are encountering several problems while compiling the code, it gives out many errors. Is it possible to speak to you where you can explain the code at length and what the errors are? Thanks in advance!

[@Emtron_Technologies]

Please Let the error. You have to compile all the .c files & include all the .h header files.

[@mahendrabhamare8289]

Have u completed this project ???? Plz help me out with dis project.

[@ayazpat]

Very good hat up Can you sell directly the full assembled fuel system to the buy. Give your reply

[@gauravchaudhari6946]

how the pressure sensor is being used to measure fuel level? which pressure are me measuring liquids or the air pressure that is going to be there

[@Emtron_Technologies]

By using an algorithm. Which takes pressure in the fuel tank, Size of the tank & then calculate the quantity.

[@SAIDNYANAMRUT]

Very nice video. Sir ji

[@Emtron_Technologies]

Thanks for watching..

[@vishnukunnummalshaji382]

Sir,how about using ultrasonic sensor to measure the fuel... is that feasible?

[@Emtron_Technologies]

You can use it for stationary fuel tank. Not recommended for vehicle.

[@vishnukunnummalshaji382]

@@Emtron_Technologies thanks sir

[@yashkushwaha9838]

The other end of the pipe on pressure sensor is at bottom of container?????. also can i use different pressure sensor like BMP180??

[@Emtron_Technologies]

Yes it is at the bottom. Yes you can use.

[@yashkushwaha9838]

but in BMP180 ,where would i fit the pipe.there is no extra nob given.

[@Emtron_Technologies]

Sorry, I missed it. You can't use BMP180.

[@yashkushwaha9838]

ok...thankyou sir.

[@sukapuratech1228]

Hi guys, I have a built-in fuel gauge on my motorcycle, do you have any idea how to send fuel level from that fuel gauge to my Arduino?? without make a new sensor.

[@Emtron_Technologies]

What is the output of fuel gauge ?

[@sukapuratech1228]

@@Emtron_Technologies my motorcycle fuel gauge is analog, just like your video.. on the wiring diagram, I find a potensiometer. 4ohm for full, 100ohm for empty.

[@Emtron_Technologies]

Connect output of Fuel gauge to ADC input of arduino. check the digital values of Fuel level and write the expression for it. Display this value on LCD.

[@sukapuratech1228]

@@Emtron_Technologies ADC pin Arduino is only able to read Voltage (not current) right ?? I think the fuel gauge will result always 12V, but different current, due to different resistance of potentiometer..

[@vishnukunnummalshaji382]

This pressure sensor is unavailable here can you suggest a similar sensor for the project..... Thankz

[@Emtron_Technologies]

You can use MPX2010DP.

[@mayankrajput5300]

Is this device use iot in place of gsm and gps....if yes what are the requirements...

[@sreetejagolla]

Hi bro great work! Can I purchase this project from you? What would be the cost?

[@Emtron_Technologies]

Thanks for the feedback. We can develop for you. Development cost will be 12K

[@mukuljha9976]

Sir the sensor have two variants .. analog and digital.. which 1 u have used?

[@Emtron_Technologies]

Analog output,

[@jeelghughu8839]

What is the use of hx711??

[@Emtron_Technologies]

It's a differential A2D converter.

[@chiragprajapati9131]

HX711 24 bit ADC MPS20N40D MEMS Pressure sensor YE DO SENSER ARDUNO UNO ME USE KARSAKTAHU ????

[@Emtron_Technologies]

Yes, You can use.

[@chiragprajapati9131]

@@Emtron_Technologies HX711 24 bit ADC MPS20N40D MEMS Pressure sensor YE DO SENSER KAHASE PARCHASE KARU ?

[@chiragprajapati9131]

www.electronicscomp.com/hx711-load-cell-amplifier-module?gclid=Cj0KCQjw4qvlBRDiARIsAHme6ot4CK46rBNQFlO6yve0Kat8xwIz3-lYfbyzQCgkIb4z4tRxPbyXuncaAqYBEALw_wcB

[@chiragprajapati9131]

Ye vali link pe x711 24 bit adc vahi hai na?? To mangvalu me

[@antokriyanto1007]

Hi sir I can't fine a MPS 20N0040 in country, can i change them to similar pressure sensor? What u referention?

[@Emtron_Technologies]

purchase from here. www.banggood.in/DIP-Air-Pressure-Sensor-0-40kPa-DIP-6-For-Arduino-p-984869.html

[@akshayingle6061]

Can we use AVR project development board?

[@Emtron_Technologies]

Yes You can use.

[@vishnukunnummalshaji382]

I'm working on this project but using Arduino... I'm facing 2 problems. 1. Can't access the track message send from my phone (I'm using sim808 gps and gsm module on single board). 2. Can't figure out the algorithm used for measuring the fuel. (I'm new to embedded systems hope you will help )

[@Emtron_Technologies]

1A. You have to set a command for a GSM modem to send received SMS to UART. 2A. You have to measure the pressure, then convert the pressure into volume.

[@harajannaik1298]

Kaha se wo product mil te he

[@Emtron_Technologies]

We can develop for you.

[@shahabasms_18]

How much this cost without gps features and message notification?

[@Emtron_Technologies]

It cost me around 4000 to develop it.

[@rohitsadafule3153]

which adapter u use for programming

[@Emtron_Technologies]

AVR ISP MKII from ATMEL

[@rohitsadafule3153]

and which pin u using for programme

[@rohitsadafule3153]

and one thing also i was getting error in include.h as we dont include moter.h file that msg showing me in error side

[@Emtron_Technologies]

6 PINS for ISP Programming.

[@Emtron_Technologies]

comment or remove the line motor.h

[@carlaolakalves9498]

Hi Nice work but, how you deal with external pressure compensation to internal mass pressure? Do you use an external pressure sensor?

[@Emtron_Technologies]

Thanks for watching. By calibration the senor for external pressure. A program routine does this. No external pressure sensor.

[@carlaolakalves9498]

BSP Embed hi, I did not understend how. If the tank is empty and you calibrate it to 0 than when the liquid is add you get the internal pressure variation to mejure it, but if you have some liquid inside and the out side pressure changes, the liquid mejurement will not be the same. How to calibrate the sensor with no external one? You do need to now the external to calibrate do not you?

[@Emtron_Technologies]

I didn't taken into consideration. Since the External pressure changes is not very high. This project is in prototype stage. Sure, I will note your valuable feedback and implement in it.

[@carlaolakalves9498]

BSP Embed the change in pressure can be a lot if you calibrate and put fuel at a city that is sea level for example and go to another city 2000 feet above or vise versa. Nice work

[@Emtron_Technologies]

Absolutely correct. I had not though of it. Thanks for guidance.

[@rohitsadafule3153]

and what is avr gcc compiler

[@Emtron_Technologies]

It's a compiler. Which compiles your c program into machine understandable language (Mainly Hex File).

[@arahmed9025]

Bro I what to fit this for my auto rickshaw I want only fuel meter Can u help me

[@harpritwadekar5531]

What would be exact accuracy of this gauge??

[@Emtron_Technologies]

1ml

[@jeelghughu8839]

Hello, I am trying to run your code from your github repo. In the code 'sms.c' there is an error that reads 'implicit declaration of GenOTP' Which basically means genOTP function is not declared. How do I rectify the error? Where is genOTP function declared?

[@Emtron_Technologies]

Comment the function GenOTP. since this project doesn't required this function.

[@harshwinder2325]

Sir great work ! But I am not able to understand how you convert 'PRESSURE TO THE LITER ' niether I am getting it from the source code you provided ! Pls help me if possible I need to know the calculation done for converting pressure input to liter output ! 🙏

[@technicalutkarsh3499]

sir i can make this using ardino uno. you answer yes the plese give codeing of ardino and circuit diagram

[@Emtron_Technologies]

Yes you can make. You have to rewrite the code for arduino. Follow the logic from program & write in Arduino. I'm occupied with other projects, So it will be late to upload using Arduino.

[@gobinath6274]

Sir can I buy this product..??

[@Emtron_Technologies]

Yes you can, Mail to [e-mail]

[@gobinath6274]

Kindly go through mail..

[@albertdeka3512]

Great work.. Can I get a readymade circuit board here in Assam..

[@Emtron_Technologies]

Thanks for feedback. Sorry, you don't get ready circuit board.

[@vaishh2000]

Can I buy this project from u???

[@Emtron_Technologies]

Yes you can buy it. Send a mail to [e-mail]

[@streak171]

Bhai ye sab components kaha se milenge

[@Emtron_Technologies]

Local electronics store or you can buy from online.

[@ManveerSingh-tq9up]

Nice idea sir Kya aap ek esa digital meter bna skte ho jis se pta chle Tank me oil kita hai or os oil se kitne km bike chll skti hai project universal ho jo kisi v bike or car me use ho ske thnks

[@Emtron_Technologies]

Yes, It can be done. In most high end bikes, these features are already implemented.

[@rajalakshmiar1366]

cost estimation?

[@Emtron_Technologies]

Around 10000.

[@gaurishankarsarade3002]

Bro how much it will cost ( total)

[@Emtron_Technologies]

10K

[@chiragprajapati9131]

Are bhai sensor kahase purchase karu??

[@Emtron_Technologies]

From www.banggood.in/DIP-Air-Pressure-Sensor-0-40kPa-DIP-6-For-Arduino-p-984869.html

[@chiragprajapati9131]

Aur ye senser me arduno uno me kaise connect karu?? Konsi pin pe kya lagau pls batao aur koi program hai to vo bhi do pls

[@Emtron_Technologies]

You have use differential amplifier circuit.

[@gauravchaudhari6946]

and can you please send me the detailed circuit diagram or circuit details

[@Emtron_Technologies]

Its available in the GitHub. Link is given in the video description.

[@backpacktraveller4721]

Sir..How to integrate web server in gps project

[@Emtron_Technologies]

Sorry, You can't integrate in it.

[@rishabhtatia3444]

Can you send the code in adruino

[@Emtron_Technologies]

Currently we don't have an facility to port in Arudino.

[@rishabhtatia3444]

@@Emtron_Technologies Just a sample code will do

[@faisalahamed2575]

Sir can i buy this project from you

[@Emtron_Technologies]

Sorry, we don't have facility to sell these project.

[@faisalahamed2575]

@@Emtron_Technologies ok sir, tq, if i need help from u, wt can i do sir, ur mail id r other communication facility

[@faisalahamed2575]

Sir don't sell the project, i cme to ur place and know how connection is done, how its work, it help to me to do project

[@ghfarmsandnurseryambattur8299]

how much it cost

[@Emtron_Technologies]

20K

[@musharafullah4898]

hi sir can you send me complete steps how you made it. thank you

[@Emtron_Technologies]

All the details are available in the video description.

[@musharafullah4898]

thanks sir

[@Emtron_Technologies]

Always Welcome.

[@aji123afdsf]

Can I buy one for my car if i can can you please send me Details thanks

[@Emtron_Technologies]

It requires some modification, For installing with the real time vehicles.

[@diwakarm9882]

I am using ESP32

[@chetanjadhav6900]

Hii ... I want this project ...will u provide me ... What is cost of this project .... Otherwise make new one nd give it to me

[@Emtron_Technologies]

Sorry, Currently we are not in the position to sell these projects.

[@nagarjunareddy4203]

I need a whole program of this bro

[@Emtron_Technologies]

You can download all the details from GitHub. Link is given in the video description.

[@rohitsadafule3153]

Can I get your project

[@Emtron_Technologies]

I'm busy with other project. Couldn't make for you. But you can build yourself, As all the details are available in the video description.

[@rohitsadafule3153]

We tried all this things which you give in description but still not working plz help me send me your contact no. On my mail

[@rohitsadafule3153]

Plz give me I will pay you

[@ayyappareddykanjula9270]

Sir can u send full program file in arduino

[@Emtron_Technologies]

Will make this project using arduino in up coming episodes.

[@ayyappareddykanjula9270]

Sir can u send program only Not full

[@Emtron_Technologies]

Check the video description for full code in AVR.

[@rohitsadafule3153]

why u add all the h files in include.h

[@Emtron_Technologies]

The compiler should know the definitions of all the symbols, function declarations & constant values.

[@rohitsadafule3153]

but in this project we do not use motir so why you add motor.h

[@rohitsadafule3153]

and plz check my mail

[@rohitsadafule3153]

and send me path for how to do program in atmel because i was getting error which i mail u

[@Emtron_Technologies]

Yes, we didn't use any motor functions. But its a global header file for our project system. You can comment unnecessary header files.

[@lawsoncudjoe9462]

wow sir can you help me in your project because i wish to do some of your project

[@Emtron_Technologies]

You can build the project. All the resources are available in the video description.

[@harajannaik1298]

Please send me connection video

[@Emtron_Technologies]

check the video description.

[@rohitsadafule3153]

If you do not possible to make then send me hex file of this project

[@Emtron_Technologies]

Will upload to GitHub & inform you.

[@Emtron_Technologies]

Download Hex file & Complete ATMEL Studio project. github.com/BSP-Embed/Digital-Fuel-Gauge/tree/master/Program

[@rohitsadafule3153]

sir plz contact me i dont get build file

[@Emtron_Technologies]

Check in the GitHub. github.com/BSP-Embed/Digital-Fuel-Gauge/tree/master/Program/Header%20Files

[@venkatkamesh]

sir i tried and tired of compiling with errors.. a small guide will help me. venkat,[e-mail] thank you

[@Emtron_Technologies]

Let me know your errors. We can help to resolve it.

[@shantanusable6983]

Complete cost of project that u show in video.. Same project cost

[@Emtron_Technologies]

25K Complete Project

[@thankgodezeoffor8376]

BSP Embed rupees?

[@roshnigeneratorsservices6834]

Pls 🙏 This Video of Your Voice in Hindi Translate

[@Emtron_Technologies]

Will try. thanks for watching.

[@technicalutkarsh3499]

and make another video for give full information plese plese plese sir

[@Emtron_Technologies]

Sure, Will make on it. But it takes some time..

[@chiragprajapati9131]

bhai itna batao ki HX711 24 bit ADC MPS20N40D MEMS Pressure sensor ye do senser arduno uno me kaise connect karu?? konsi pin me kya pls itna batao

[@Emtron_Technologies]

Sorry, I have no idea about arduino. You can check for library online for HX711.

[@karthikmedia4u]

You should implement this for real bike and sell this ..

[@Emtron_Technologies]

Thanks for the inspirational words.

[@mukuljha9976]

why the quantity is multiplied by 10???...can we fix this??

[@Emtron_Technologies]

Yes, You can fix in the code.

[@technicalutkarsh3499]

give full coding in one file

[@Emtron_Technologies]

Sure..

[@IOQMvedantuPwandAakash]

Heloo

[@arvindgujrati4239]

Pressure thoda Hindi mein Samjha ayenge Me ye banna chahatahu

[@Emtron_Technologies]

Sorry, My mother tongue is not Hindi.

[@arvindgujrati4239]

@@Emtron_Technologies OK sar thank you

[@sharong7198]

Sir can u send me the abstract it's my kind request to you sir Please this abstract to my mail...

[@Emtron_Technologies]

You can download from GitHub & Link is given in the video description.

[@rohitsadafule3153]

jiska bhi program run huva he vo plz muze contect kare mera program run nahi ho raha email id [e-mail]

[@Emtron_Technologies]

Include all header files & C File in AVR Studio & Compile to generate hex file.

[@rohitsadafule3153]

its not generating because its show me include type.h file also and plz tell me your contect no. on mail my project is on this week. so plz guide me

[@rohitsadafule3153]

if ur contact is not possible then plz send me hex file of this project

[@Emtron_Technologies]

Include Types.h file, Which is under Header file directory.

[@rohitsadafule3153]

There is no any types.h file

[@81mrlz]

Excuse me, but I do not understand the language 🤔

[@Emtron_Technologies]

Sorry for my pronunciation. Will try to improve.

[@CUCARACHA707]

No se entiennnnde una mierrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrdaaaaaaaa...!!

[@richieviera9192]

I can hardly understand your accent its horrible not a good one