in Brazil it is very expensive to buy audio equipment. Your channel makes our dream come true!
@teo5754 ай бұрын
vc foi preciso nesse comentário
@aosenhorlouvai Жыл бұрын
thank you for giving us access to this knowledge.
@rockstarimotski2 жыл бұрын
Very good video! I've built myself a couple of boosts using a J201 transistor and just a few components. The board turned out so small, I even installed one in the cavity of my Les Paul. And I engage it using a push/push pot. Hidden, but there where you need it 😁
@RobMods2 жыл бұрын
Nice one. A single fet buffer/ boost is fine as an onboard pre. I've done that myself many times.
@philhardy18 Жыл бұрын
That's really interesting Rob . I built a very similar jfet boost with 2xj113s . I was interested that you went with 2 stages for the same reasons that i did .
@RobMods Жыл бұрын
Thanks Phil. I've noticed the Keeley Katana is similar in this respect as well.
@areusmartinez834312 күн бұрын
You are a genius 😮
@therewasascene6 ай бұрын
Really good vid for the build but would’ve liked some more demoing I’ve never done through hole and am excited to try this though!
@daniwest13702 жыл бұрын
Love the content Rob!
@RobMods2 жыл бұрын
Thanks mate!
@basspoobag2 жыл бұрын
a MANS drink.... haha great content as usual Rob:)
@ajmorfeАй бұрын
Hello, I've set it up and it sounds great, but I have a problem, when you activate it, the damn "pop" sounds, is there any way to correct that? Thank you
@thejoetandy2 жыл бұрын
Hey Rob, any chance you could drop a B.O.M or an online cart for these builds for us locals/beginner's? Great build, great use of the local drink for the name pun
@peternoya Жыл бұрын
Link to the project in video description. There you will find the pdf containing layout, schematics and all build information for this and many other projects. Good luck.
@rudy5360 Жыл бұрын
Just found your channel, loved this video! Can I ask what software are you using for veroboard layout?
@RobMods Жыл бұрын
Hi Rudy. For stripboard layouts, I use an old free program called PCB Express. I used to use it years ago when I would etch my own boards, and I've kept using it for simple stuff like this because I have all my custom parts there and I''m very quick with it. Plus for the channel, it has a nice chunky sort of look, if you know what I mean. It is a very outdated programme though.
@zulfiarahimsaАй бұрын
Hi there, what is the name of jack socket that you are used for the input and output?
@martinlibert93696 ай бұрын
Hi! When I buy my electronic components, are there any things I need to pay attention to (e.g. resistor tolerance, capacitor power, etc.)?
@peternoya2 жыл бұрын
Pretty good!
@RobMods Жыл бұрын
Thanks Peter, I'm glad you liked it. This was the first time I've built a pedal in one of these small enclosures. Was a fun project!
@peternoya Жыл бұрын
@@RobMods After watching the video I built one using your layout. For the enclosure I use a metal electrical box a little bit wider than the 1590A. It worked perfect for me and sounds amazingly good. Thanks for the project.
@RobMods Жыл бұрын
@@peternoya Cool mate. Thanks for the kind words. Glad it worked out!
@crnogor Жыл бұрын
As you have huge exp. with components to sound deal , let me ask : which resistors should i use in , which ewer pedal make , wire , carbon or metal film ? What about tolerance o/o ? Should i avoid Al e . lyte caps in a signal path ? Thanks ! Very interesting clip ! Regards !
@RobMods Жыл бұрын
1/4W or 1/2W metal film resistors for sure. A good quality electrolytic is fine for the output coupling cap. Thanks mate. I'm glad you enjoyed my video!
@MrYusuf-ob1hu5 ай бұрын
Hey rob, canni use it for my bass guitar ?
@RobMods5 ай бұрын
Yes, I don't see why not. It has a more or less flat response. If your bass is active and you slap a lot you would probably want to optimise the headroom as I talked about.
@LeoRamanery Жыл бұрын
Hi, very good video. Can you help me? I can't find 2N5484 to buy it. What component I can put to replace this 2N5484 ? Transistor BF410A is able to assemble the pedal without problem ? If you can help me with this I'll gratefull.
@RobMods Жыл бұрын
You are right, mouser and digikey both now list these as obsolete. I buy mine from jaycar, but there's also still many ebay sellers.
@jai4709 Жыл бұрын
✌️ p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽
@doncalloway136 Жыл бұрын
I need it in a step by step LAYOUT format ( not schematic) . Do it like B.Y.O.C. amp build plans does theirs . I would be grateful and many others would be grateful also..Do that and I will make a donation !