How to make a DJI Mavic Clone Quadcopter With 3D Printer

In this video, i am using 3D Printer, and i will make a DJI Mavic Clone Quadcopter at Home, Hope you guys will enjoy this !!!
- Parts that you need :
+ Transmitter : DEVO7 : goo.gl/F7DKhK
+ RX 701 :goo.gl/qpu1h9
+ 3S 11,1v 1500mah Battery : goo.gl/jrAKHT
+ A2212 1400KV Brushless Motor : goo.gl/YU81q4
+ 30A Brushless ESC : goo.gl/oiewQY
+ Bullet Propeller Adapter Holder 3,17mm : goo.gl/b8oN5q
+ 8330 Propeller : goo.gl/8ziXww
+ KK 2.1.5 flight controller
+ Video setup : • How to make a 350 Brus...
and • How to Assembling F450...
Thanks for watching, Have a great day !

[@serjaocjr]

When I said "make a DJI Mavic Pro", this dude took It seriously. LOL. Amazing as always!

[@Theo-dj7vs]

How so...it lame...simple.

[@BEEEGYOSHl]

Theo listen bro jut let the man be happy, just because your life is ass doesn’t mean you have to be a jerk to this chap.

[@Turtle6897]

@@BEEEGYOSHl same.

[@rcarindom]

Well.. wheres the camera module... thats mighty important for mavic users. :)

[@davey2k12]

How to make a Mavic pro using a Hudson drone lol

[@galdemschillaci4787]

Would be great if you use Black Filament

[@dcfuksurmom]

with a carbon fiber vinyl wrap.

[@jerrypham2636]

Really refreshing to see the true diy process for this build. Great job

[@amanmittal4232]

Missing That 4k cam😉😉

[@onexone5123]

Electronics Freak my next project is this 2 Axis gimbal with 4K camera mavic pro clone

[@fluminatti]

I'm searching the internet how to connect cam in naza, but I have not found anything yet

[@mehuldegama2235]

Aman Mittal

[@tanakornmongsunthon8233]

Aman Mittal ไ

[@tanakornmongsunthon8233]

Aman Mittal ต

[@sambo9855]

I was so impressed that I watched this twice in a row. My only complaint is that with skills like yours you could've had a camera on there. Then it'll be a Mavic drone for sure.

[@MrSpiritmonger]

crazy engineering involved

[@JasonEllingsworth]

It would still be very far from a Mavic drone. It would need gps capability, multiple cameras that acted as sensors to tell the drone that it is about to impact something and also include object avoidance software. Simply adding a 4k camera would be super basic and easy compared to all the other crap that would need to be added to make this thing comparable to a DJI Mavic.

[@fanz8689]

speechless, dude very creative

[@kunalchangoiwala7474]

What about the DJI inspire series Clones??? That would be just soo DOPE!!!!

[@karbonkai]

It would be inspirational...

[@ThePrentice916]

kzbin.info/www/bejne/e5yzeoefqsuiiMUsi=fK68hAGyyIP1_g1A

[@blablaboublou3190]

My friend, you are endowed with all love from Algeria

[@hack4you144]

Best video on KZbin

[@rcbuildmaster6192]

You can use apm 2.8 or pixhawk instead of kk 2.x as apm is stable and has more features like GPS etc

[@2aalu]

make more 3d printer project.... nice video bro !!!!

[@jodyschultz5870]

Cute, it looks a bit like a Mavic. But as the owner of multiple drones, the reason I spent over a grand on a Mavic is because it has a 4k camera on a gimbal and will stream video 7km and fly home via GPS, has ultrasonic to avoid bumping into things, a downward facing camera to lock onto a home point to within inches, a head tracking headset with full telemetry overlay on a heads up display with artificial horizon and has fully autonomous capability. Also has barometer and compass as well as GPS so you can "park" in the sky hands off for 20 min + . Can this blue one do any of that? I think not.

[@ceoatcrystalsoft4942]

These are great points but those are the easy parts. Anyone can get a collision detection system online, and by choosing your own transmitter, you could make your drone fly anywhere with signal (far beyond what you legally are supposed to). By custom building, you can add an 8k camera on a 4-axis gimbal. Custom is king, if you have the patience.

[@TypeRomy]

Can you made a dji spark clone please. You are the *Best*

[@ThePrentice916]

kzbin.info/www/bejne/e5yzeoefqsuiiMUsi=fK68hAGyyIP1_g1A

[@MrAllhaileris]

A drone this awesome deserves a better control board than a kk2. I like the spracing f3 even though loading the firmware is a pain.

[@KRTV]

GPS수신의 부재인지 뒤뚱거리기는 하지만 시도한다는 것 자체가 대단합니다 '좋아요' 눌러드려요.

[@xtc3dresearchteam744]

Printed this on my Form 3 with tough resin. Damn it turned out great!!!! I modded the cad to fit a gopro

[@sricharan7287]

How did u do that

[@DaveSmith-cp5kj]

How are you liking the Form 3? I worked with a Form 2 for dental work and it worked fine for a while but broke down quickly and I got next to no support.

[@solvedood3763]

You are a best makenical engeeniar bhai

[@ElectricPointOfficial]

It's great video

[@charanroyal6089]

Hi Sri can you make 3d printer

[@LiveTheLimit]

The only DJI Mavic that's made in Vietnam lol

[@beyworld1126]

Bro you are a genius

[@achmadyusuf]

Sir? Can you upload tutorial how to make 3d printer same as yours?

[@atzukak1]

is an Hypercube, is an DIY type of printer, plenty of documentation, you can find kits, but better document yourself first before jumping into it. www.thingiverse.com/thing:2254103

[@mathewthompson8022]

Your working on millions subs mate!

[@johnspartan1996]

very cool video and home made drone, congrats! But it's definitely not a mavic air ;) not very stable, lot of oscillations, the range is 500m at most with no FPV, no super stable and orientable 4k camera, no camera for collision detection and for very precise altitude, no GPS, etc

[@mikailpace1044]

Dam son straight to the point But I agree

[@mbrn-wm]

I think it would be possible if he used a better flight controller

[@no.5520]

My brother has a mavic pro 2, and when I saw this video, I laughed. 😂🤣😂🤣

[@sadhasivamthangavel3296]

Why

[@ajalvarez1387]

Great video just a put GoPro Hero 7 Black or Dji Osmo Pocket!!You’re good to go!😎👍

[@ajalvarez1387]

Just subscribed to your channel!😎

[@JZM006]

AJ Alvarez wow...

[@Citrus76]

i love your videos

[@mitsync]

Really cool. Maybe you could do something about the music cutting out when there is sound on the video as the sound isn't necessary and it's pretty annoying if the music cuts out constantly,

[@WondersOWNCrafts]

WOW! its awesome creativity..

[@melvinmcfly4498]

Write “danger zone” on a piece of paper, then put this drone on it and BAM, you got a clone drone in the danger zone

[@Supercoolvideobros]

And cooler than the other drones 🤩🤩

[@Fenix9990]

You are my favourite channel

[@DrozChann3L]

super awesome i have great time watching

[@DreamDeveloper]

I usually do my projects on weekends and end up looking for screws really love the 4:38 all in there i hope to make a box like that.

[@alinasser6279]

You the best man nice job

[@pieceofpotato7883]

can you tell us what is the total cost if the build

[@herospartan2987]

5€

[@among-us-99999]

HeroSpartan no. One motor alone costs at least 4 times as much. And flight controllers are not cheap.

[@herospartan2987]

@@among-us-99999 i just lookt it upp and it cost 5,8€

[@among-us-99999]

HeroSpartan wow..you are right. They are really cheap.

[@among-us-99999]

So..something like 20 € for the motors,10€ for the ESCs, 60€ for the transmitter and the price of the battery depends on how much power you want. The link for the Reciever doesn’t work, so I don’t know how much it costs. And what does the flight controller cost?

[@BrassLock]

You seem to have a wide range of very useful skills that will keep you and your viewers happy for years and years . . .

[@pg24092003]

pls do a vedio on home made 3d printer

[@redditchrc960]

Great video but it be nice if you could add altitude hold and gps functionality on it

[@viktorask]

Just no GPS, gimbal, camera, remote and countless other stuff.

[@kpkpkpkpkpkpkpkpkp]

i love windows u too i guess

[@vincentiomartinrk6561]

And non altitude hold

[@qcfoh2085]

Let’s just say his version just flies lol

[@DanielPierce]

You should put a spring on the fold out joints between the nut and the inside of the joint, so when you go to fold out the propeller arms there is a way for the arms to flex open so that there is enough space for the proud locking joints to move into the receiver joints and then the spring will tension the joint back up when they interlock. I explained this terribly, I hope you see what I mean tho....

[@shuhashchowdhury9046]

Wow ! very cool Drone

[@kamleshkumar1132]

This guy has a shop of electronics😮😮😮😮

[@tdrdronesebikesandscooters8377]

Awesome video, I very impressed.

[@mrmanusia]

where i can got the 3d printer with low cost?

[@mrmanusia]

anonymous thanks, at least I can find you there

[@arekayin]

you can buy that at ali express

[@arekayin]

the best budget 3d printer is anet a8 3d printer

[@mrmanusia]

ROBONAUTICS thanks a lot, bro

[@branedavidovac8080]

www.amazon.com/Delta-Go-Smart-Desktop-Printer/dp/B073HJ9T2J

[@windyWindward]

You could go with anything newer when it comes to flight control board cause the kk is super old at this point and doesn't have the ability to connect to any extra modules like GPU etc

[@robinfrenzy]

Exactly what I thought, I remember this board from David Windestal's tricopters :P So it is reaaaally old

[@ItaloLima]

Very Cool !! (Pra quem é BR ou fala português) Pessoal faço projetos relacionados a eletrônica ,dentre outros .

[@gungriffonbr]

q bom pena q as peças so mavic clone nao cabem na minha impressora 3d

[@flyingj-5696]

Gorgeous! Liked and subscribed!

[@laughforlife369]

I am gonna say its so cool.

[@keerthivasan8111]

Super it's conform that u will build ur own phone one-day 👏👏

[@Noe-wb9tu]

Wow amazing project

[@dhwanilpandya7520]

Adding an obstacle prevention system would surely make it DJI quality

[@zidanedex]

how much for the total cost?

[@AmitWagh]

Superb..You are Awesome..

[@KrotowX]

Working wannabe Mavic with KK 2.1.5 flight controller. Awesome. 80 Lvl DJI trolling acquired :)

[@geovanelino8060]

Great, good project likessssssss infinity.

[@guthrieglasgow7272]

Those ESCs are going to get toasty but I bet this works really well with modern parts.

[@neerajsinghbhandari8609]

can you attach 3d printer's design files (.STL)

[@chishopastik]

As I understood it uploaded to thingiverse

[@akshaykumarsharma9887]

No he don't give because he never do so

[@16goodzila97]

@@chishopastik Thanks +1 subscriber !!!

[@vishnurakhi1802]

Your a very good creater. Your projects are extremely assume. Thanks for the videos and keep on making your projects.Supper bro

[@shubhamfpv3041]

wow you struggle a lot of time to make videos i love bro i love your videos

[@aminathhaiha2642]

SJ EditZ unboXing Reviews

[@gnamp]

you explain everything so well...

[@arenabreakoutbegginer]

I thought you we're making a quadcopter with build in 3D printer HAHAHA

[@stevenz9521]

Very good job for you. You also let me know a drone is not only a motor with propellers. DJI really has an advanced control system. Wonderful video

[@omarshahzad9319]

You are the best

[@nizamuddinapu]

You get my love. Amazing work buddy

[@baboowam23]

10:17 the sound that makes my booty shake when i hear it.

[@jonarsproductions8737]

Dioross Orozco why lmao😂😂

[@baboowam23]

@@jonarsproductions8737 the song is catchy

[@wyattelam4151]

same bruh

[@jlpcpr]

Seriously cool!

[@Gunfighterhaft]

Now do it with our current miniquad gear 😎 than its a Real sleeper 🤪

[@djisenord7455]

I built a clone a few weeks ago. Just purchased the chassis components off Ebay for about $40 dollars. Works great. I used a NAZI system for flight control.

[@byebye9785]

DJI Senord Wasn't that flight controller for a fixed wing with a pulse jet?

[@i.j22]

NAZI 😂😂💀💀

[@xxtrengt8871]

Maybe a bit of PID tuning would be nice ^^

[@adamk.3946]

Wow, talk about OLD parts. I wouldn't recommend anyone use those components for a project like this.

[@marvfpv1590]

Grey John They are really old, trust me The escs are way bigger than what we use today, and the only advantage this kk2 has is that it has a screen

[@Stambo59]

I would never use that style of prop adaptor on a quad. On a plane you can glide to land if a prop comes off, that thing becomes an out of control brick. Also KK2 is almost as old as it gets for flight controllers. I think Noah used one to stabilise the arc. :p

[@MrUnder30seconds]

i knew the dog before he came to class

[@dawnofhopee]

What parts would you recommend. If its not a lot to ask.

[@cripplingdepression8889]

For a camera quadcopter: Pixhawk PX4 or Naza mini as a Flight controller, For a race quad: Matek F405 or an F4 running BetaFlight No motors with these prop adaptors, just use some generic 2205s or 2204 Use XT60 connectors on your batteries, they are much better Use comptact ESCs made for 250 quads, they are much smaller and you can add caps if you want to

[@JuricaBosnar]

great post. what is total cost for hardware?

[@luisenriquerodrigueza5917]

short making the clone of the control but I am very well the 4k cam

[@SayBuu]

Very good video pls make the video on the topic how to make transmitter and receiver pls I want to learn how to make it wireless

[@eminguney8325]

Wooooooooooooooooooow it seems amazing bro...

[@TechThakar]

Superb idea bro use apm flitcontroler and gimbal.

[@MrHD71]

2:32 so the print took you 1 minute ... ok

[@riggy3282]

NE555 clearly someone doesn't know how editing works...

[@karsonchristensen8045]

Circuit boards: Am I a joke to you?

[@venkatmourya5117]

Cost of 3d printer

[@nanafalke]

arround 130$ for the cheapest machine, called the anet a8.

[@branedavidovac8080]

www.amazon.com/Delta-Go-Smart-Desktop-Printer/dp/B073HJ9T2J

[@slimaneyacine165]

Venkat Mourya 500$

[@namanjain98]

40,000 rs

[@TheJosemartel]

search at eBay page, look for iprusa 3d printer.

[@sunitagaware6680]

You are great bro and talented bro

[@lucasfalcon4079]

Just because it looks like a DJI, it doesn't mean it is. It's just a regular drone

[@Mufffyy]

Just because you point out the obvious on the internet, it doesn't mean you're a genius. >.>

[@anjithphilipjose3166]

well said

[@frankgamer1245]

Great bro and the best 👌👌👍

[@manishjangra.]

Sir please make a power bank

[@M4S73RH4CK3R]

youtube is full of tutorials.... everything is the same... if you want you can just connect 18650 betteries in paralel and buy some cheap powerbank module from ebay/aliexpress... these have an LCD too.... and for a case? just some tape.... i've done it this way... easy and cheap....

[@aminathhaiha2642]

J

[@wildangaming3879]

Jangra Manish botak

[@bttech1544]

it's really hard job bro well done

[@manupado]

Wow! Great job!!! Nice!

[@DiscoveryChannelbylt68]

beautiful works thank you i love in watching your vidéo

[@riyasharmatecheditor9697]

Very nice drone

[@ZephyrRestorations]

Awesome video! Thank you.

[@kokkonosiko]

Great job brother. You could also use some conformal coating on the soldering spots behind the KK 2.1.5 flight controller. The mechanic solder mask or anything similar to protect them from rust and humidity.

[@mauriciopc92]

There is a hole close to the motors to pass the wires through, did you pass externally!

[@andrewb7817]

Nice job! How far can it fly? How many minutes battery is hold?

[@TechodyChannel]

Very nice idea... and awesome drone..

[@tophypes1180]

wow you have a lot of patience :) Good job

[@ruslanlitvin3330]

That is amazing!!! might as well 3d print an rc traxxs car !!!

[@sankalpnath2291]

You are amazing man

[@slandon1977]

Neat, but I worry about all those solder connections. Not that they will fail, but I worry that should I break something (frame wise) it will be a lot of work to transfer over the electronics. Are there any easy/cheap quick disconnects that you are aware of? Probably buying all the crimpers and supplies for that would offset the affordability of this drone though...

[@abhijeetkumar-zx6wm]

Even nice work Good work

[@tendereu9562]

Dude that's sick I would never been able to do something like that😱😱

[@among-us-99999]

He used the same components needed for every other quadcopter.

[@JayGamzTV]

How much that sir? That clone dji frame or cover? I want to buy?

[@JayGamzTV]

Hello

[@Aleksender87-1]

Great video and step by step instructions, thank you! Quick question - it seems that all 8330F Mavic props have 3mm shaft diameter, bullet adapter's shaft in the description is 5mm on output, how did you fit yours? I'm struggling to find bullet adapters that have 3 mm output shaft.

[@ojonfpv]

Very nice!