Incredible channel and content. Came across it in my search for fiberglassing how-tos. Seems there's plenty for subwoofer enclosures and blending in purchased scoops and such, but finding content where much larger panels are concerned is harder to find. Love it. Love all the ideas for re-use of simple homebuilding materials instead of totally custom foam plugs.
@tonyrichmond94287 жыл бұрын
Best fiberglass videos on youtube!!!!
@gateway88337 жыл бұрын
As many times as I've watched this vedio I am still amazed at your skill. Every time I watch this I see something different. Maybe you should hold clinics on Fiberglassing.
@tigerseye735 жыл бұрын
Don't care for your music, but your content is informative and educational. Good work.
@MarbleRoller4 жыл бұрын
Awesome video!!!! It's vary rare for any YT video to grab my attention for the over 20 min. Very well made, thank you for sharing your knowledge this way!!! Part 2 is great as well!!
@cro5084 жыл бұрын
This is great! I pretty much have an exact same project so I can use this video as a guide of how to make a bodykit fit onto a car that it's not designed for.
@LaggyWizard5 жыл бұрын
im a little late to the party, cant believe i havent seen this before. i didnt expext to get this much knowledge from one video. thank you very much for this
@J-Wrks4 жыл бұрын
I really wish I could be this good. Impressive work
@Alientraveler0033 жыл бұрын
Amazing morning to you sir ..your work is of the top notch thank you
@zachlaraquel7964 жыл бұрын
When replicating a fender do i need to make a mold first or i could just lay the fiberglass on the fender? Of i just lay the fiberglass on the fender would it be the same exact size?
@michaelsnyder74423 жыл бұрын
Technically the fender copy will be bigger than the actual fender and the dimensions will be slightly different. I see your probably trying to save yourself some time and cost of materials, I get that. To do it right, the way Bill in his videos does it will yield you good to excellent results. To recoup your expenses maybe advertise you can make copies of your specific fender for other builders, just a thought.
@vincentbaelde-millar6706 жыл бұрын
I'm with you on that one, both the prelude and integra are great cars, but the DC2 integra looks way better.
@SabzGarage3 жыл бұрын
Fantastic video mate thanks!
@NuvoVision5 жыл бұрын
You’re a legend mate. Thanks for the content!
@TerryLProbertWriter7 жыл бұрын
Love the lessons fella.
@300cd7 жыл бұрын
Thank you for the information sir
@bergenrallyteam36483 жыл бұрын
Hey Bill at the 20:30 mark your are laying the glass on the fender. I see you raised the side of the car up a bit to reduce the angle of the fender lip. It still seems like the glass fell down, did you employ any other techniques to aid the glass adhering to the fender lip? Thanks, keep up the great work and helping the YT community!
@BillsBuildandRace3 жыл бұрын
With race cars fender lips aren't really needed & are prone to causing tire rub issues, so normally I don't roll the cloth right around them. The only way you can do that is to have the guard horizontal. It can be done, but with a 1 piece front that means the guards 1) must be separate pieces like with this build 2) The lips have to be added after the main guard layup as a second job once the lips have been formed. These days (as in my current Bellet build & earlier Civic Phase 4 build), I make the front half of the guards part of the bonnet section, and divide off the back quarter of both front guards (like where the join line is on a Mk1 Mini guard), so large flares don't foul the wheels at the back when the front flips up. So it all depends on whether you're building a race or a show car, a or a flip up or pull off front end.
@jufrabappa39226 жыл бұрын
Huge respect to you sir!!! Keep it up!!!
@daviddrennan17594 жыл бұрын
Awesome just awesome!!!
@Rhapsheet6 жыл бұрын
Could you do a video about how to make a mould from a bumper? I have a bn sport bumper i want to remake in carbon fiber and polyurethane would also like to do door panel but any mould making video doing something that big would be perfect
@BillsBuildandRace6 жыл бұрын
Already done it. Go to "Library" list on left of home page - select "Fiberglass & Carbon Fiber Tutorials" - go to no.16. No.15 shows the processes you'd use to make a door, but the window framing is the really tricky part. Wny do you want to make a bumper in carbon? Getting a clear finish really would require vacuum bagging.. and are you experienced at all in that?
@offroader223 жыл бұрын
What kind of clay is that? Is it like modeling clay? The kind that drys up by it self or the kind that stays soft until its heated in an oven?
@BillsBuildandRace3 жыл бұрын
It's the cheapest I can buy - from a wholesale supplier to craft shops. It's a cpottery clay designed to be fired (which of course I never do). I keep it soft by wrapping it in a wet towel & a plastic bag. That way it keeps for over 5 years and you can re-hydrate most of what you use in the wet bagging too.
@offroader223 жыл бұрын
@@BillsBuildandRace thanx. Great tip. I've done a few fiberglass molds, but never used clay before. Sure gonna try that.
@LibertyLakeWildlife6 жыл бұрын
Love the rally intro! Question for you: What release compound do you use? Looks like you were washing it off with a hose. Thanks
@BillsBuildandRace6 жыл бұрын
This is a masterclass tutorial, meaning I don't cover the basics of fiberglassing so I have enough time in the film to show the advanced techniques. You'll find all the details of the products I use in my very first fiberglass tutorial, which you'd gain from watching. You'll find it under "Fiberglass" in my "Library" lists (screen top left). I always use two release agents 1) Release wax (cheap floor wax will do), 2) PVA release - available from fiberglass supply shops. Google one locally & avoid buying supplies at a hardware store where staff no NOTHING and the product range is non existent and "kits" a trap for beginners.
@mattwright70427 жыл бұрын
like the new intro
@olddognewtricks48045 жыл бұрын
Thanks for the video, I have a 55 F100. Boy the panels are heavy. I guess I could make fiberglass panels the same way you have? Is fiberglass expensive? Thanks,
@hiiack14425 жыл бұрын
It's so much lighter and not too expensive. Finding it is hardest make sure you get resin too
@fiyah42735 жыл бұрын
Dayum he's good
@boss28ipodtech3 жыл бұрын
Where can you buy fiberglass? the auto stores have small quantities for high prices
@BillsBuildandRace3 жыл бұрын
Yes - and those repair kits are designed for boats and have the wrong cloth in them for car work. Just Google "Fiberglass materials suppliers" in your area to find a trade supplier.
@watahyahknow6 жыл бұрын
must have a pretty big attic to store all those moulds
@sebspeed64037 жыл бұрын
i love these vids keep it up
@rockyringo12475 жыл бұрын
current ride, sounds right
@anerdfilmsco59705 жыл бұрын
@WJP004 I know you hate repeating yourself, sorry. I'm will be making fiberglass door for my car (a4 b5) what weight fiberglass do you recommend I use?
@BillsBuildandRace4 жыл бұрын
One layer 225gm csm (8 oz.) then two layers 450gm csm (16 oz.)
@anerdfilmsco59704 жыл бұрын
@@BillsBuildandRace much appreciated thank you, is there any resins you prefer over another?
@BillsBuildandRace4 жыл бұрын
@@anerdfilmsco5970 Vinylester resins cost more, so I use Low Styrene Emissions (LSE), but any general purpose poly resin will do. Don't try & use any surfboard resin, as most have a solar activated catalyst.
@taylorjackson84645 жыл бұрын
What kind of cost is it to make the molds ?
@voltron637 жыл бұрын
cool work man..
@yogie32354 жыл бұрын
Sir I'm new to body work and would like to make my own fiberglass fenders, will fiberglass hair do a better on a 90 degree angle instead of using the sheets?
@BillsBuildandRace4 жыл бұрын
Fenders usually require two piece molds. That is not too difficult, & I walk you through molding & making fenders in this video step by step. kzbin.info/www/bejne/r3TKe3l3hNGAjrs The proper name for what you are calling "hair" is Chopped Strand Mat (csm), which is what I use on 95% of my lay ups. Yes csm does take up bends more readily than woven mat, and it is totally unsuitable for compound curves - which is why guys who use it lay up a mosaic of tiny pieces. That wastes time, materials (due to the excessive overlap), and is just plain clumsy compared to csm. It's usually a sign that the user has bought their materials in a "kit" from a hardware store, rather than tracking down a fiberglass materials supplier in their area (just Google that). However fiberglass (even csm) does not like sharp ninety degree bends, as the cloth wants to stay flat and pulls back a little from the Gelcoat. Gelcoat has no strength without the fiberglass cloth, so the result is your Gelcoat peels & cracks away along sharp edges. The way to avoid this is to bevel sharp internal edges with car body filler mixed with a little resin over your dried Gelcoat before you lay on the cloth & resin. This reduces the sharpness of ninety degree bends for the cloth. I demonstrate this at 8.54 secs in the tagged video here.
@DannyG24936 жыл бұрын
Can geltcoat be removed from f Stock fender? Or is it like the fender is screw once it gets painted with that's stuff?
@BillsBuildandRace6 жыл бұрын
Gelcoat will not stick to a factory panel as long as you give it two coats of release (or cheap supermarket floor) wax plus a coat of PVA release. You just hose the PVA release off after molding & buff the wax.
@DannyG24936 жыл бұрын
@@BillsBuildandRace thank you!
@ACTIVEGAMER2987 жыл бұрын
why the reupload?
@BillsBuildandRace7 жыл бұрын
Music police.
@ACTIVEGAMER2987 жыл бұрын
Ahh
@kohipook14457 жыл бұрын
How long did it for you to fill and fare/sand the dye? much faring?
@BillsBuildandRace7 жыл бұрын
Took the usual three applications of filler with a sand in between each (one a day), but using Fairing Compound which is way softer than car bog plus using a 60 grit disc on a rotating air sander meant it took a total of about five hits on the car for an hour each day.
@welcometomychannelswelcome72613 жыл бұрын
He is a legend but too much adding
@Level_Up_Nation5 жыл бұрын
what type of release agent did you use?
@BillsBuildandRace5 жыл бұрын
One coat of release (or floor) wax, not polished. The multiple coats - wax on wax off is total bs. Then a brush on coat of PVA release from a fiberglass trade supplier.
@tiredhero6 жыл бұрын
i can not find Wattyl Estapol Flooring 7008 in the uk what else do you think i could use? love your channel, thank you for the knowledge
@BillsBuildandRace6 жыл бұрын
Famowood Glaze Coat is the American equivalent, otherwise you're looking for a two pack clear epoxy floor varnish...TWO PACK only.
@tiredhero6 жыл бұрын
thank you so much for the quick reply ill look for some online now... thanks again
@tiredhero6 жыл бұрын
would epoxy two pack floor paint be ok if its clear www.paints4trade.com/2-pack-epoxy-floor-paint-262902-p.asp?gclid=CjwKCAiA7JfSBRBrEiwA1DWSGzuqtI6LS7fycE8SxgqdkBZtrj9N_1buqF3NftFClU_MTQ-hAOnR2hoCpLIQAvD_BwE
@BillsBuildandRace6 жыл бұрын
That's exactly it. Doesn't have to be clear either, just two pack.
@tiredhero6 жыл бұрын
thank you so very much i really appreciate the help
@zAvAvAz2 жыл бұрын
thats a honda prelude
@vaioskaliakoudas63887 жыл бұрын
Can I also use Fiberglass Cloth instead of matte?
@BillsBuildandRace7 жыл бұрын
You can, but woven fiberglass cloth does not work well on compound curves - it's really more suited to flat surfaces. I'll also bet you've only got it in a really light grade - if so it would require many many layers to get the same thickness & strength as chopped strand mat. Do yourself a favor. Use what I do in the videos. Shortcuts in fiberglassing or just using what you have rather than what the job requires only leads to frustration, wasted time & wasted materials.
@theoriginalcttheoriginalct69386 жыл бұрын
Not to disagree with an obvious fiberglass Jedi, but, there are certain types of woven mat which allow for great detail within complex curves. It's very expensive compared to chopped stand, but a lot stronger. I say this because, the mess that chopped stand makes is incredible. After using it once, I would never use it again. Additionally, the airborne dust from repeatedly cut strand seems to stick around forever compared to the airborne dust from cut woven mat. You don't want to breath any of it, btw.
@eindhovenico7 жыл бұрын
How's your homebuild going btw?
@BillsBuildandRace7 жыл бұрын
I lost 7 weeks with record breaking 45 degree plus heat wave day after day. Too hot to work, but back on the tools now. Saving for tiles.
@paul_neumeister7 жыл бұрын
So when are the videos rolling out again? I'm desperately waiting to see how it's coming along and what the end result will look like!!! I'm really enjoying all the content you are giving us and hope you'll keep up the good work! All the best from far away Germany! :)
@BillsBuildandRace7 жыл бұрын
Next episode is half done. There's no point me filming all the fiddly touch up painting I'm busy with now. Lots of it & time consuming & too boring to film.
@mauricevandraanen42867 жыл бұрын
I mis you mate. When will you be back with your home building?
@gateway88337 жыл бұрын
WJP004 Hay, some of us don't have anything to do but watch paint dry. What you're doing is high drama comparatively.
@mauricevandraanen42867 жыл бұрын
Why don't you call it a interceptor instead?
@BillsBuildandRace7 жыл бұрын
I like that!
@mauricevandraanen42867 жыл бұрын
I'm not into cars as a hobby, had 3 exidents in Oz 2 with myself behind the wheel. But drove 1 and a half time around Australiä back in 1984. My brother Cas owned a coppy of that interceptor which they drove with in Mad Max 1
@robertthornhill43796 жыл бұрын
hi bill good job 9/10 bob in the uk
@Wrenalyth6 жыл бұрын
What were the materials you used??
@BillsBuildandRace6 жыл бұрын
I don't list what I use in each video as they are basically the same all the time & that would get boring. Watch my very first tutorial (see "Fiberglass Tutorials" in "Library" left on home page). These days I only list products I use that vary from those basic ones to avoid repetition.
@Wrenalyth6 жыл бұрын
WJP004 k thanks bro I appreciate it, I am currently making my own car from scratch with an LS 6.2 engine and was wondering if you had any tips as well on carbon fiber? Just wondering thx.
@BillsBuildandRace6 жыл бұрын
Carbon does not take up compound curves or tight bends without vacuum bagging and you can get small air pockets that spoil that reknown mega smooth gloss surface in the top surface . However there is still a lot that can be done hand laying it without vacuum assist and on parts which are to be painted and can therefore have imperfections filled & smoothed in the usual pre-painting ways.
@Wrenalyth6 жыл бұрын
WJP004 thanks that is a lot of help, will be watching your whole fibreglass playlist to find out more!!👍
@pearsonpaintauto34577 жыл бұрын
I'm interested in the materials used. Anyway you could email me?
@BillsBuildandRace7 жыл бұрын
Message me through my Facebook link (main page - screen top right)
@wellingtonfeitosamachadoma76387 жыл бұрын
muito bom .tem ZAP
@ezguardian5 жыл бұрын
to much trouble
@1powelrainbow27 жыл бұрын
Man! I love the music as much as your videos...best of two worlds! What song is used at kzbin.info/www/bejne/mp3XoZdjetyDotUm9s ?
@BillsBuildandRace7 жыл бұрын
Cottonmouth Timeshift... on You Tube
@soupra25947 жыл бұрын
Dnb for life ( ^ω^)
@ernestguzman45155 жыл бұрын
ehhhh! waste of time the car is smashed! lots of money to waste
@williambusby1466 жыл бұрын
Easier to just buy the parts and install.
@BillsBuildandRace6 жыл бұрын
Well this has got to be the most dumb ass reply I've ever received... and I've got over 250 videos on You Tube. 1) "Custom" by definition means NEVER just bought off the parts shelf bolted on, or "EASY". It's the extra effort of doing it that makes it custom. 2) Can you please tell me WHERE I buy a one piece front end for a Honda? I'm not aware of any dealer in the world who sells one. 3) And where exactly do I go to buy an Integra front end widened to fit a Prelude? What a dipstick you are.