How to Make a Hand Lift •• Awesome Invention Idea

part 1
Build Awesome Homemade Electric Hand car Lift || part 1
• Awesome Homemade Inven...
Know More Subscribe here:
/ drhacker-com
Check my Other videos :
/ @diy.invented

[@zbudda]

That's the best part of invention, the prototype needs to be tested to find out what works and what needs improving.

[@MontclairWrestler112]

Really good concept brother with some slight tweaks this would be awesome props to you my friend good video !

[@MaFed191080]

The center of gravity is misaligned. Make the load lie on the axle of the wheels, not on the hands. Handles should be bent that the load lifted you, but not you the load on hands held. Make the handles longer, then you will understand. Sorry about my English.

[@andrewhendly9075]

Dumb it down plz

[@MaFed191080]

@@andrewhendly9075 Переводите сами с RUS: Центр тяжести не правильно расположен по отношению к оси колёс. Приходится при таком расположении держать вес на руках ,а надо, чтоб вес был расположен комфортно на оси. Чтобы это исправить нужно увеличить длину ручек, эффект рычага. Можно и так объяснить: нужно сделать правильно балансировку между точками (ось колёс-груз-руки). Чем ближе расположен груз к оси тем легче удерживать груз и не надо напрягать свою спину.

[@TheTwistedStone]

Recess central section so the load rests evenly on the side rails...?

[@fixinphil]

Finally someone using a mig welder ☺️

[@DJayAce4]

Really awesome idea. For my own personal use I'd want to lengthen the platform to where it can basically lift up large trash cans filled with scrap and what not. Also put a pair of stabilizer wheels on the front end of the platform so I don't have to sit there and try and balance the load trying to raise it into the bed. This is a great idea though, just needs a couple tweaks for me and this would be incredible. Good stuff man

[@zeke112964]

Everyone needs a toolbox/lawnmower lift! .........FREAKING GENIUS.....maybe you should invent a locking toolbox drawer so all your stuff doesn't end up on the floor!

[@teamdrummond6915]

I just want to state, that; I LOVE TECHNOLOGY! Superlative werk!!

[@patricklacson]

Brilliant use of your winch! I'm sure someone has said this already but if that cable snaps under heavy load you will feel it in your frontal area and worse on your face!

[@host836]

This is better as a forklift rather than a plated lift. good work !

[@computacioncero]

Need one of these to lift concrete bags into the hopper. Great invention.

[@stubbydnutz]

awesome concept with a little tweaking you'll have something awesome

[@mp-xt2rg]

nice concept but end product doesn't look particularly useful. The bottom needs some type of support that stays on the ground so it doesn't need to be counter balanced and you need two tracks on either side to get rid of that gap between the lift plate and the back of the hand dolly. also the lift plate should be twice the depth.

[@g.r.4853]

Nice idea but costly accident waiting to happen. either PI or damaged goods. A front floor brace, larger lift table and ability to conveniently strap the object to the table are thoughts that you have already noticed because you were clever enough to create and build it.

[@getfreestuffwlindabanks9346]

Cool Idea! Taking hand off to work Lift button seems sketchy to me among other minor details that have been brought up. Thanks for sharing the video!

[@iansvecs]

Best one yet, nice work!! Challenge for you. Build a car jack that lifts all 4 wheels off the floor and acts like a trolley so you can push the car around. So you can jack up, remove all wheels and just push the car aside for later if need be.

[@evazkee7246]

Lube that drill bit. Spray material before welding

[@danburch9989]

Excellent idea but poor design execution. Needs a larger lifting platform. Also needs a fixed base under the platform to resist the forward tilting forces due to no support in front of the center of gravity. I'm not sure that sharp bend over the fair lead is good for the cable. Remove the fair lead and replace with a 3" diameter pulley or snatch block. Look at commercial designs. I need to build one to lift window AC units without another person's help (not always available)..

[@thomasrobinette3227]

What kind of weak-ass biotch are you?

[@tedtolentino4955]

@@thomasrobinette3227 You gotta love that he is using his head instead of injuring himself lifting AC units. If there is such a unit that can do this lifting, he has a good safety ethic about his work.

[@daviddewilde8041]

Hi. The idea is good. But it still needs a bit of work. Good bases for evolution.

[@murraychadwick9362]

Put some forks on the front that set on the ground so it won't tip foreward

[@francisbryanrobles9643]

may i know what are the things that you used in making that hand lifter?? thanks

[@CrazyCHikcin]

And now I’ll just sharpen the blades lmao 😂

[@queeneywarren9474]

I love this idea exactly what I need thank you

[@bryanroye1112]

You could make it interchangeable. Like make a wider base or forks like a tiny fork lift or a ring for berrals ect. Nice job bro. Better get a patent

[@Accumulator1]

Will it lift a round bale?

[@n0_buddy250]

May I know Sir what are the materials needed for this DIY?

[@skinnypete5158]

Hello I love your idea can you tell me what battery you got. On that

[@kemmpatrickjalandoni7004]

what is the horsepower of your motor and its rpm ?

[@the7thsons47]

Lol Did you just weld vertical going up??

[@jorgeceballos0825]

excelente video Dr Hacker....puedes hacer algo parecido para subir escaleras, saludos desde colombia.......ya tienes un subscriptor mas......

[@Gs_DIY_ideas]

Thanks

[@tbcarleton]

I'd add a plate or outriggers to the bottom in order to make it stable when lifting a load, I'd set the lift platform all the way back ahainst the frame, and I'd use a single pulley with a bigger diameter so the cable doesn't have to bend so far.

[@bobsmith9329]

Accident waiting to happen.

[@dalemasyk1583]

back to the drawin board , lol however neat idea bud

[@paktehyehangler2273]

very good bro👍👍👍

[@paul57401]

Good idea. I was making а сart. And a trouble was stability and mouting system. Because the boxes have different sizes and forms

[@BeetleSmasher]

At first I’m like “can’t u just use a normal dolly” and then I realized it can raise high enough for a truck bed or van. Now that’s cool

[@jasonfaciane8373]

Good idea.

[@danimalmaxasis2762]

I was just asked my buddy my neighbor hey man can you help me lift this tool box end of the back of the van thank you brother I really appreciate you other wise I would have to build this contraption because I just need an extra hand LOL

[@dr.crazymax]

Клас 👍

[@afiqaqim4477]

What’s material to made this project?

[@jonnydiezpaz769]

grande,genial. que bueno la vedad

[@isaacsalazarcarrasco6906]

Excelwnte

[@pollydor07]

Clever nice . Thanks

[@johanponin1360]

Great vid. Whats the maximum load?

[@kazeemkhan8250]

10kg

[@gwebocelestron9194]

10 kg equals 20 lbs. You did all this to move 20 lbs?

[@e.fifield9034]

they are made so it can climb stairs with things like a heavy alliance

[@leecarpio2583]

It's so easy to criticize ones work not every body is perfect. This man has an idea it's not perfect cause their is not another ,practice makes perfect don't give up you'll get it right if your going to put a man's work down tell me why didn't you come up with the idea

[@tomtuduc8227]

Great work. Love it. Looking to buy one like it.

[@hoss1943]

Nice idea but should have made the lift base a little wider.

[@klausschieser449]

Dale Beardmore v/

[@skatewithvanz]

Just add legs to the front with casters

[@dianaalexandra1126]

Can you make something with this to lift an elderly person from bed to standing position

[@kevinwalker3499]

I can make a custom lift for u

[@peterbready9488]

Good idea but execution is rough and unsafe. Guarantee that toolbox will be smashed when it falls off.

[@zeke112964]

He should invent a lock for the toolbox drawers

[@onewordhereonewordthere6975]

@@zeke112964 excellent idea I will working on one myself. Thank you

[@fortunateolifant2389]

Imagine if the boot slips😂

[@svajunasbikulcius560]

Great effort, sadly unfit for it's porpose, back to drawing board.

[@tonyl2220]

Overkill for its use!

[@masranawangpone4402]

how many maximal load ?

[@peterfitzwell9658]

@2:53: Problem) "Having trouble getting bolt to go in because holes aren't perfectly aligned." Solution?) "Tries switching bolt with one from a different hole that did go in"😂😂😂 I'm not bashing you or making fun of you man, I just thought it was hilarious because I do things like that all the time lol. That's an awesome, handy thing you built. Good job 👍🏼

[@fixitdude9748]

Lmao

[@patricknovakdepaula889]

Muito bom.

[@DIY.Invented]

Thanks for watching

[@homeo-uk7ul]

Hello, excellent work and beautiful demonstration, that she can load you to the maximum?

[@DIY.Invented]

Thanks

[@MOTIVATIONEXTREME]

excellent

[@michaelpalmer937]

back to drawing board, few modifications required ? English Mik

[@brauliorubio2465]

😆 Wesco Hydraulic Dolly would be a better option

[@dpshockley57]

Good one Dude!

[@danwells7691]

make the wheels powerd that be awsone

[@thomasrobinette3227]

I like it

[@skinnypete5158]

And what’s max weight can it pick up ?

[@lukytriky1675]

Fallo grave de inclinación de la pala y falta un apoyo para el pie. Suspendido

[@prakashm6765]

motor type and gear ratio

[@ziegenwilly]

cool

[@Gs_DIY_ideas]

Thanks

[@engrsanibello6148]

Good and fine

[@smrenterprises3152]

Very nice I want to buy if possible

[@Another_Random_Dave]

Show us the one where you ripped the whole front of the lawnmower off

[@TheMagixic]

Soit disant la caisse est lourd...

[@ericeric4903]

Tu ferais mueux de construire un diable qui roule comme une brouette électrique par exemple

[@bdsn2183]

Oh-ly shit daaaammmnnn

[@TheTwistedStone]

Your using it like a forklift so why not add forks instead ?

[@derrecycler1770]

Nicht zu Ende gedacht.

[@e.fifield9034]

Electro-truck makes them

[@sounasamdy8303]

The folding lifting System idea is not clear

[@skinnypete5158]

I’m disabled and need something like this to pick me up

[@ohyeahthatsright3155]

Lots of unemployed mechanical engineers commenting here.

[@gerbenbroekhuizen9484]

Good idea but it is not good for your accu

[@socalRooster]

You sire need to improve your design otherwise good idea

[@perez-gaara]

Where the parts list for the bearing roller at 2:37

[@freddieaguilar2733]

Not to bright,"Ciro pera loca"

[@bobbobowski5519]

Pomysł moim zdaniem nie dopracowany, i prezentacja nie do końca nie udana

[@johnr.6029]

VERY DANGEROUS. You need a front-base stabilizer on that. That will kill you.

[@corwinmallonee4319]

for a prototype sure, but that is in no way a safe finished product

[@mightyeagle]

Time to modify

[@MehmetBoysal]

Looks like it's invention to hurt some one.

[@kemmpatrickjalandoni7004]

is it a dc motor?

[@thejasonstyle]

Didn't you see the 12V battery? It's a dc motor 😂

[@kemmpatrickjalandoni7004]

@@thejasonstyle bcuz i can't see that kind of dc motor in the store, so i thought he used an inverter hahaha

[@mastertestermakerhackermas3517]

my idea

[@billwilliams3998]

A waste of a winch and a battery

[@Campers_Anonymous]

Very cool, not practical at all lol

[@terryb5612]

The crap background music kills the vid

[@krisjohnson4443]

What part of this is genius? Using pliers instead of a wench to hold bolts secure at 2:31 or using pliers as a hammer at 2:53. Really, what good is it? The lift table is so narrow a small tool box wont stay on. Another POGO STICK WITH A ENGINE GLUED ON. Looks fancy but doesn't really do much. Neither awesome or genius.

[@roncharles2585]

Holy shit man. U know some of yr stuff has acuple decent ideas however that power lift is in need of 3rd or why 4th wheel so its stabile and yr lift plate sucks large. The lift flange shud be recessed into+on both sides of bearing slide. Toss that lift plate into yr next pc of fkn shit half stolen super fkn genius?? Ideas. Copies of few gd ideas and fkn spliced into the docs super genius so frkn 1 of kind brilliant ideas. Yeah rite. Noticed u cutting w metal saw in one of yr other genius works and noticed if yr finger wasnt already cut off it wudve bn. Guess we all know how that brilliant masterpiece was achieved. Now thats original.

[@roncharles2585]

Oh yeah lost my train of thought toss the lift plate and use interchangleable forks, folding triple plate that opens and gives width but u have to bring the weight into slide tower or u'll b on verge of losing everything u pick up. ie 3rd wheel trianglular or 4th square. Duh! Oh yeah 4got yr a fkn dr+fkn genius so u know all this

[@user-hh3bs6rj7c]

Оце хуйня.

[@ZH-qs7pk]

🤔😬

[@robertdominiczak6523]

What a waste of time money and effort

[@theroosevelthoteltheroosev6781]

What a fool.

[@mdhasnain3054]

Fucking Job

[@lfernandplopsa3627]

LOAD OF CRAP