How to make a lighted Glitter glass block

[@SunshineSmiles189]

This looks so fun! I’m totally making this. Corrine’s videos are such a delight to watch. She’s got so much personality!

[@aidanlopez-fp1xd]

LOVE IT , GREAT INSTRUCTIONS

[@rosinyberg8747]

Love it...! I have an old block... NOW, I know what to do with it!!! Thank You!!

[@tskeens1166]

Hi Corinne....I want to know if it’s ok to add the polycyclic and glitter a second time because I have spots that didn’t get covered

[@CorinneBlackstone]

Yes you can but be sure the first layer is completely dry. Wait 25 hours if possible

[@sandersjas]

Hi Corinne, where did you get the I’m Dreaming of a White Christmas SVG?

[@arkangelkaida1284]

Oh i love it thank u for sharing beautiful work u do

[@arkangelkaida1284]

Oh i love it beautiful work u dis

[@lindamccall4200]

thank you so much, I learned everything I needed.

[@rosajl884]

Hi, thanks for the tutorial.i have polyurethane varnish, may a use it as a glue? does any glitter works?

[@CorinneBlackstone]

Polyurethane is not going to work for this. And any glitter works yes

[@chelleweatherspoon2226]

Thank you for this very helpful and inspiring tutorial.

[@donnaberrios7571]

Is it ok to put lights in the block with the poly in there tnx love the video

[@CorinneBlackstone]

Yep! Like anything electrical you'll want to inspect your cords and wires. But yes totally safe

[@maryannposey1837]

Great Christmas ideas

[@floshepherd4703]

Corrine, Can you spread it with a brush also, as well as the way you are doing it. Very intteresting and I hope to try it soon. Flo

[@CorinneBlackstone]

You could but I think in these it would be hard to cover everything

[@donnahicks4853]

🎄I think these are awesome. I enjoy making all kinds of crafts. The blocks with the elf’s inside and a quote on it are cute that I have seen people make. Blessings and Merry Christmas!!!! 🎄🎄

[@stevelaminack1516]

2 years later, you blew up that 50k goal.

[@susansharpe725]

Adorable!

[@margiestefanski2821]

I bought 20 blocks on sale for 2020 Christmas projects what's the easiest way to get the big store sticker on the front off?

[@CorinneBlackstone]

Soak in warm water, rub with goo gone, you can use a razor blade as well.

[@amyschultz9395]

Can't wait to make one!! Thank you

[@staceycollins9232]

Love it!

[@theresaschrand7021]

How do you stop the lights from scratching the glitter off the I side of the block?

[@CorinneBlackstone]

Allow the item to dry over night

[@iluv2stamp]

Thanks for your videos

[@cvp862]

Love your videos and you are always so helpful! Thank you!

[@CorinneBlackstone]

Thank you so much!

[@rosinyberg8747]

Outstanding

[@rosemarywilliams5136]

What size should i cut the vinyl to fit the glass blocks

[@CorinneBlackstone]

You need to measure your blanks. The size of my blocks may be different from yours

[@Sally-wk9uh]

How did you create such a large opening?

[@CorinneBlackstone]

It comes with the opening

[@meriahbrandt5515]

I coated my block in polycrylic then glittered it yesterday. Is there a rough guess on how long it takes to dry?

[@CorinneBlackstone]

About 24 hours

[@lynnk9545]

Do you find that it’s better to have the opening on the top or bottom? I made one without glitter and have the opening on the bottom. I’m thinking of adding glitter to it now.

[@CorinneBlackstone]

I like it on the top personally that way any loose glitter just stays inside

[@karencollier227]

Corinne Blackstone does the glass block come with the hole in the top?

[@CorinneBlackstone]

This one does yes. They don’t all come with it so you will want to check before buying

[@zild71]

Love ❤️ it!

[@krissiele-hermida7050]

Love!!!! I've seen various sizes for the lights. Just curious which size do u reccomend for the 8x8 block?

[@CorinneBlackstone]

These ones are really tiny. I think it's just a matter of the look you want. This only has 12 lights on it so it's not super bright

[@1auntiealex]

Where do you find polycrylic? And what brands are best?

[@CorinneBlackstone]

most hardware stores sell it I prefer the minwax brand

[@1auntiealex]

@@CorinneBlackstone Thank you! :)

[@iamme9876]

Home depot doesn't sell it anymore. Lowes and Walmart do

[@meriahbrandt5515]

Is the poly ok to put with the lights? Just curious if the light gets hot will rhe poly have a reaction?

[@CorinneBlackstone]

Yes its safe. The lights won't effect it at all.

[@meriahbrandt5515]

Ok cool! Thanks for the quick reply. Have a great rest of your week !

[@CorinneBlackstone]

@@meriahbrandt5515 you too!

[@laurasautographs]

what if it wasn't dry when you put the lights in, and it scratched the glitter off? How could you repair it?

[@CorinneBlackstone]

You can add some more polycrylic and glitter

[@carolynr7562]

Use lots of glitter so it rolls easy to get all spots . The glitter you can pour out and use it again .

[@normazaharioudakis115]

Love them how would you wrap them if you sell them

[@CorinneBlackstone]

bubble wrap and lots of it LOL

[@countrygirl929024]

Miniwax water base polycrylic clear gloss That’s the one you use I purchased this and started using it on the boxes I was using a adhesive spray and it wasn’t working it would scratch the glitter every time I put the fairy lights in

[@dizzydi316]

hi love your video.. question can i use polycrylic matte or should it be satin?

[@CorinneBlackstone]

It doesn't matter for this kind of application. I used gloss but any kind will work

[@dizzydi316]

@@CorinneBlackstone so appreciated thank you

[@scottglesmer137]

Where can i get lights at

[@CorinneBlackstone]

These are what I use amzn.to/47UGn3t

[@MertensMayhem]

My glass block has no hole?? Is it possible to make one lol

[@CorinneBlackstone]

I mean you need a special blade and cutter to create the hole. I’ve never personally tried it

[@yolandasittard]

where you buy youre glitter? i like it a lot

[@CorinneBlackstone]

This was all from random places Michael’s Joanna dollar tree

[@colleenlevesque7420]

Thank you for this great tutorial. I do have a question though: as for the Polycrylic, I Googled it and see that there are different finishes (i.e. satin, semi-gloss, etc.). Does the finish matter? Also, it it MinWax? Thanks for any help you can give! Colleen

[@CorinneBlackstone]

I recommend using gloss and it is the brand minwax

[@valpett1360]

Can you also use mod podge or no?

[@CorinneBlackstone]

I don't recommend mod podge for anything because its just glue. I don't love it but yes if its all you have you can use it.

[@christinastephens228]

Help!! I put glitter in as you said and let it sit for days. When I put the lights in it scratched the glitter off. What do you think could be the problem?

[@CorinneBlackstone]

You probably let your polycrylic dry too long so it didn’t form enough of a bond with the glitter

[@ryansweet1681]

how did you cut your opening in your glass block

[@CorinneBlackstone]

I didn't. They came that way

[@ryansweet1681]

@@CorinneBlackstone ok, i only asked because I used to cut the holes myself and that was tough

[@donnasoper7619]

Where do you get the glass blocks from?

[@CorinneBlackstone]

AC Moore

[@barryswanson2818]

It would be nice to know how you cut the hole in the block…..

[@CorinneBlackstone]

I didn’t. They come with the hole already in them

[@tanmom2729]

What are the blocks called and where can you find them please? Thank you💓

[@CorinneBlackstone]

They are just called glass blocks and they can be found at most craft stores. Even sometimes walmart

[@grannygreen9701]

Thank you for your tutorial. Is the Polycrylic you are using specifically used as an adhesive? Polycrylic in the UK, is used as a protective finish on wooden furniture, it's an expensive type of varnish not adhesive.

[@CorinneBlackstone]

It's the same stuff. :) this can be used as a sealer too

[@grannygreen9701]

@@CorinneBlackstone Thank you, I wasn't sure.

[@claudiarendon6486]

Did you somehow clean the inside of the block? Or is it not necessary? I want to try making one but not sure if I should clean the inside.

[@CorinneBlackstone]

I didn't clean it at all honestly. But you could. Swish some rubbing alcohol around and then drain it out and let it dry

[@sabrinawilson8944]

Have you tried chunky glitter?

[@CorinneBlackstone]

Yes it works ok. It’s a little harder to get real solid coverage

[@teridoty4285]

where are the instructions for the blue one? the one where the glitter is only on the front?

[@CorinneBlackstone]

It's the same process just swirl the glitter only on the front then drain.

[@lafrcatz1]

@@CorinneBlackstone but how do you get the poly to drain out without it hitting other parts of the block?

[@CorinneBlackstone]

@@lafrcatz1 I just turn it upside down and angle it a little

[@caroljack670]

Cr

[@rosinyberg8747]

Pick me... pick me