How to make a lighted led whip

hope you enjoyed the video heres a list of supply you'll need for the job to make your own led whip.
www.amazon.com/BTF-LIGHTING-A... www.amazon.com/HUAHA-16-Ft-Sh... www.amazon.com/BTF-LIGHTING-W...

[@lymert3192]

Awesome video man! 10/10 I appreciate that you didn’t edit it down to a two minute video. You had over 25 minutes of great teaching and I loved ever minute. Subscribed and liked 👍👍

[@MrRICKDAWG4444]

Right on my dude, glad you liked it thank you.

[@michaelbidegain6913]

Excellent video and thanks for sharing i'm going to give it a shot myself.

[@MrRICKDAWG4444]

Thank you. Be sure and check out part two i just posted

[@hawkskyflier]

Very nice, was sitting trying to think how to make my own.. and first thing I thought of was 1/2" thick PVC pipe... found your DYI... Hmmm, may have to make some now. I love the way the lights "dance" instead of just "ON".. Thanks, excellent tutorial!!

[@MrRICKDAWG4444]

Thank you

[@rawbdiggity]

Great video DMAX and you sir are a trooper I was reading the comments and everyone asks the same questions over and over and you reply. Good on you man

[@MrRICKDAWG4444]

Yeah it's a rough life here on you tube. Lol. Thank you though

[@rawbdiggity]

@@MrRICKDAWG4444 😆😆

[@Josh-pn3ds]

Great video man very helpful thanks a lot

[@MrRICKDAWG4444]

Right on man. Thank you

[@randygregory7826]

Great video though. Very good step by step... Thanks..

[@johnhill893]

thank you for taking the time to make this video I just made my fist led whip I can't wait to get it on my machine

[@MrRICKDAWG4444]

Sweet. Be sure and check out the part two video if you haven't already.

[@christianrobles7561]

Problably better than some brand whips!! Nice man.

[@MrRICKDAWG4444]

Definitely better. Thanks

[@adombrowski1]

Great video. I'm a truck driver, so I have a couple of 4ft whip antennas that I can use for this project.

[@MrRICKDAWG4444]

Nice. I also drive semi. Just dedicate your radio on different antenna because the leds will throw off your swr's and possibly fry the finals in your radio.

[@bencroke3365]

Great Video! Awesome!

[@MrRICKDAWG4444]

Thank you

[@magwamagwa45110]

Awesome Video well explained and easy to follow thank you so much for sharing this is a project the grand kids will love....

[@MrRICKDAWG4444]

Thank you! be sure and check out the part two I have on this video also.

[@magwamagwa45110]

The big shrink wrap with the glue do you have a link for that and what size is it thank you ...

[@MrRICKDAWG4444]

Please check out the part two video as it has more updated technology and links.

[@RP4886]

Great video, thanks

[@MDJCreations]

Aaaaamazing!!!

[@MrRICKDAWG4444]

Thank you!

[@RogerSayers]

Great video, thanks for sharing this with us... I have a 5150 and think I might rework it like you have done here. I like all the different light patterns or modes that you have to choose from. Oh! By the way the way your mentioning the lube an so made me laugh 😅.... didn't bother me one bit cause my mind is always in the gutter LMAO so again, thanks for sharing this with us. Thumbs up 👍 you have a new subscriber to your channel.

[@MrRICKDAWG4444]

Thank you. Be sure and check out the part 2 video on my page.

[@finleyslawncare]

Nice video. Subscribed!!!

[@MrRICKDAWG4444]

Thank you

[@TAPTAPSAILOR]

cool video man.

[@MrRICKDAWG4444]

Thx bud. Much appreciated

[@christophedodson9505]

I like to use a little dawn soap and water when putting my heat shrink on my homemade whips!

[@MrRICKDAWG4444]

That's a pretty good idea I'll have to give that a try next time.

[@paulmadden708]

Excellent tutorial, more tools in the box is a good thing. I look forward in learning more from you. When you reach 500 subscribers, maybe a whip giveaway could be in the near future. Very informative, thank you.

[@MrRICKDAWG4444]

Thank you. That's a great idea on the give away if only more people would share my videos to social media platforms i might be able to get to 500 subs. That would be awesome if you could help me out with that.

[@monsieurvastey3294]

What’s you ig

[@MrRICKDAWG4444]

DMAX_909

[@eltony122]

Best video

[@MrRICKDAWG4444]

Thank you.

[@shatangatang]

Dope video bro

[@retrorocket69]

Thanks Dude!

[@MrRICKDAWG4444]

No problem

[@Jweiss7939]

Great job!! Very informative!! Thank you for sharing the links, too!! Quick question, will this controller cover 'dual' LED whips? Looks like it has a splitter. I apologize if you mentioned it already in the video. THANK YOU!!!

[@Kid617]

Best video thanks for explaining question could the power wire be extending and what voltage would it be and can you use one controller for 2 led whips

[@myquicklist1]

Awesome video, thanks for the info and tips. Where did you get that thick black heat shrink with glue?

[@MrRICKDAWG4444]

Thanks. Consider subscribing for more cool how to videos. I get all the supplys from amazon most of which are in the video description. Here is the stuff i use. www.amazon.com/Black-Heavy-Adhesive-Lined-Shrink-Tubing/dp/B00NVDFQWU

[@ajnaz26]

Awesome video! Subscribed! Are there any rock led pods that would sync with these lights? Could I use the same controller and just splice the pods into it? Thx for any help!!

[@MrRICKDAWG4444]

Yes these controllers will work about 1024 leds i believe, so if you splice all of them it should work but I've never actually tried rock lights b4. Keep me posted on it please.

[@iFreaKyy]

Awesome video man ! So if I wanted to run these whips on a separate zone from all my rock lights & dome lights. Is there a controller that allows the whips to be programmable but also separate zones for the regular RGB lights ?? I’m looking for a Bluetooth controller all in one to keep the install nice and clean but use also super easy.

[@MrRICKDAWG4444]

I'm not sure as far as zoning goes but i do know the controllers will only allow up to 1024 leds before they start to melt down.

[@entrapment55]

NICE VIDEO, THANKS FOR SHARING, the links ONLY have 3 items, whats missing is the black heavy duty shrink wrap, the rod, the quick disconnect parts. THANKS AGAIN

[@MrRICKDAWG4444]

Some of the link's have expired. I'll be updating these shortly.

[@Pbrownjr33]

DMAX909. Best video yet. Extra nerd status and I LOVE IT. Quick question about the plugs tho. Looks like you have it plugged into a wall outlet. do you have a list of the connectors needed for that? I'm going to use my outlet in the back of my truck which works out well. Thanks again my dude, awesome video.

[@MrRICKDAWG4444]

The plugs used in the video are just 5.5 barrel plugs and I'm using a 12volt converter at the wall. So basically you can use any style connector you want on a vehicle since its just a positive and negative 12v wire. I've actually been using a new style 3 pin screw together type connection for whips i make now but you can use practically anything you like. Hope this helps

[@Pbrownjr33]

@@MrRICKDAWG4444 Copy that bud. Thank you very much, I appreciate it.

[@coryhopkins4368]

Your instructions were so awesome. I built two of these over the weekend. They look and work perfect. I have a question on the controller set up. What is the Adjust pixel point method? How do I know how many pixels I have? The instructions say to long press the menu/auto button and then the mode + and mode - to adjust the number of pixel points, then press speed + and speed -, each adjustment 32 pixel points. Any help or assistance with this would be appreciated. Thank you once again.

[@MrRICKDAWG4444]

Thank you. The pixel point adjust how many pixels you have in the line so if you only wanted to light up part of your whip instead of the whole thing you could adjust the number you have.

[@EARFISHY]

Great video man! I have a question about the power source from the side x side to the controller, do you have a link for the plug that you run to the 12v system I can’t seem to find anything that looks like it would work, tia

[@MrRICKDAWG4444]

Thank you It's a 5.5 male plug that plugs into the controller.

[@RidgeRunnerATV]

Thank you sir!

[@MrRICKDAWG4444]

You're welcome. Enjoy

[@RidgeRunnerATV]

@@MrRICKDAWG4444 Will do and I will give you a shout out when I get them made.

[@MrRICKDAWG4444]

Awesome, I'd appreciate that. Thanks

[@AETraviezo]

Awesome vid. Quick question, how can I power both whips so they don't cause the controller to shut off and on when full white is selected?

[@carlosvaldez6151]

Awesome video man. Definitely gotta try make my own now. What kind of heat shrink did you use to protect the control module at the bottom of the whip. You mentioned it was a heavy duty heat shrink but didn't mention what brand or where you found it.

[@MrRICKDAWG4444]

Check out the part two video. I believe I put that shrink wrap in the description. Also I don't put the controller in the whips anymore I explaine that more in depth on part two.

[@lamichaelhoward8147]

Thanks for the video. Awesome tutorial. What’s the name of those lights

[@MrRICKDAWG4444]

Link in description will tell you everything you need to know about them.

[@vicentemontano5059]

Great diy video!!! Were could I find thick heat shrink used on contoller?

[@MrRICKDAWG4444]

Everything used is found on Amazon. Type in 1.25 3to1 adhesive shrink wrap and you should see several different ads for that stuff. It will come in sticks not rolls.

[@FknNefFy]

ONE TIP: it would be easier to pull the rod through the silicone rather than trying to push it and fighting with it if you can figure out how do you pull it through… Anyway, this isn’t what I’m making but it was still very helpful and I wanted to say thank you and possibly offer an idea that would make it even easier! ✌🏻😘

[@MrRICKDAWG4444]

Thanks for the tip. I use compressed air for them now and it's much easier

[@brow300mag]

Great video... Any idea where I can get just the Quick Connects to make my own whips?

[@MrRICKDAWG4444]

They are just air hose fittings however the male side that comes on the 5150 day whip that i start with is custom made by them. There are several different mounting options for whips if you do a Google search you see a few different choices. If you're handy with a welder I'll be posting a video on some magnetic ones that I'm making that use thicker 1/2" buggy whips.

[@chadeckert4609]

Same whip I have!

[@MrRICKDAWG4444]

Check out the part two video

[@MrRenotstoner]

I think I'ma tackle this project for my quad, couple questions. How do you hook these up to a 12v battery source? I see you have them on a wall outlet, is it as simple as cutting off the wire from the wall outlet and putting on some ring terminals for a battery? And do these LEDs also stay a solid color? My buddies have their whips and they set them to solid colors like white when they want to light up camp or just to have some light while sitting on top of the dunes. Love the video, honestly I gotta say it's the most informative how to I've seen.

[@MrRICKDAWG4444]

They just plug into 12 volt positive and negative on a battery. In the video I'm using a AC/DC converter however it's the same thing i just plug into the wall. I personally tap into the tail lights so when i turn them on the whip comes on. They do all solid colors and smart modes. I'm about to put a new video up on a set of whips i made for subscriber that will show how i sync two of them together with new connector i recommend using.

[@MrRenotstoner]

@@MrRICKDAWG4444 awesome thanks for the reply. Can't wait to see the video.

[@efrainsandoval2999]

Hey where are you located at love your work bro👍🏽👍🏽👍🏽

[@MrRICKDAWG4444]

Beaumont, CA

[@jessegant4776]

Have you built a pair of whips that are synced together and could you explain what I need to do to do that. Loved the video thanks

[@MrRICKDAWG4444]

Yes basically that's all I build is paired whips anymore. Ok so instead of putting the controller in the whip you're going to use a 3pin connector coming off of each whip then make a wire harness that splices two leads off of the controller that will go to both whips. I recommend using a sp110e Bluetooth controller for this. Here's a old pic of how my first set looked. imgur.com/gallery/hJDHr6K

[@ashleydennis5344]

Thank you again for this video! I have made one now and I have another question. The led lights silicone coating is splitting as soon as I finish wrapping them and beginning to slide the shrink wrap on, do you have a trick to prevent this?

[@MrRICKDAWG4444]

I'm glad you enjoyed the video. As for the silicon on the strip, practice makes perfect. The first one i made also started to split and the only trick i found is to have everything ready to go before you start wrapping and work fast so that it does not have a chance to split before you get the shrink wrap on. I hope this helps for your next build. Feel free to reach out to me with any other questions you have.

[@trevor77yfz]

Do you use two controllers? One for each whip? Or just tie two whips to one controller.

[@richardbento489]

This is a great video...I do not have a 5150 Whip. What sturdy 4' whip would you recommend? Thanks

[@MrRICKDAWG4444]

I only use the 5150 day whips to build on so I couldn't tell you.

[@sk8rboy31595]

I'm about to build one using a cb antenna mast, was wondering about how the masts have a spiral wire going up wondering if it would mess up the wrapping process of the led strip

[@MrRICKDAWG4444]

I built my first one from a cb antenna, a firestick specifically alot of big companies do the same.. You will need to remove the shrink wrap and wire coils first and then you will still end up with a weak whip because after you shred everything off you'll find they are pretty small but the most important part is the threads that come on the antenna are made of very cheap metal and will snap at the threads easily with all the added weight of the leds if you're riding aggresive thru bumps. I adhered a male air hose fitting to the bottom on mine for that reason. I highly recommend that you use a strong whip for this project like the 5150 Day whip if you plan on riding hard.

[@shatangatang]

Thx you very much!

[@taliesinbourne7484]

This is awesome! I want to build one completely from scratch, including the quick release. How sturdy/bendy should the whip itself be and will this damage the wires/LED strip itself when it bends? Also will one control unit control 2 panels?

[@MrRICKDAWG4444]

The less bendy the better. Be sure and check out part two on my page to learn how to sync them.

[@taliesinbourne7484]

@@MrRICKDAWG4444 oh sweet cheers

[@MrRICKDAWG4444]

@@taliesinbourne7484 enjoy

[@SteveGarfunkle]

Thanks bud

[@MrRICKDAWG4444]

You're welcome

[@Onelowrado]

Just placed my order

[@MrRICKDAWG4444]

Be sure and watch part 2 on my page

[@richardbento489]

Planning to make a RV "Camp Locator LED Whip" and decided to use a 4', 1/2" copper pipe with 3/4" to 1/2" base connector....do you see any issues with this?

[@kb-ym2mu]

How is the white power box powered? What harness do I need to power it?

[@mykiavital3524]

Thanks

[@MrRICKDAWG4444]

Welcome

[@she_loves_gabrielm7124]

For the leds strips can i just cut it and put a cable straight to the batterys??

[@fyerfighter11]

Thank you for your time to put this video together, I just built one using your info!! I was wondering if you have built one using the 60 LEDs? I'm guessing the additional LEDs would make it harder to wrap?

[@MrRICKDAWG4444]

Great question using more LEDs per foot will require power injection along the way to keep all the leds at the same brightness.

[@fyerfighter11]

Yeah I was just wondering because I saw the 60 LED strip when I ordered the ones you used.

[@MrRICKDAWG4444]

If you're only building a 4' whip those leds would be fine without power injection.

[@chuck300mxc]

Can you give any advice on the newest LED strips that are available today, bulb size (5050) or number of LEDs 60 or 120 per meter ?

[@MrRICKDAWG4444]

It really depends what you're looking for and the application it's being used on, the newest chip set is the ws2815 i believe. However with all the benefits of them i didn't like the pattern they run in for whips due to having a IC chip in every led. Also some controllers didn't like running that many IC chips and couldn't light a full 6' whip plus they cost twice as much. At the end of the day if you're not looking to run a single color at its peak abilities like white for example then you can't really beat the ws2811 and the number of LEDs is up to you long as you consider power injection if you plan on running 6' whips.

[@alcarriere2365]

Awesome video. I used most of your techniques to make mine the same. My only struggle is the top cap. What did you use? I used fiberglass driveway markers for my poles.

[@MrRICKDAWG4444]

Thanks, as for the caps i use the ones that come on the 5150 day whips. I'm sure you could find them with a Google search or maybe just try wrapping up some electrical tape at the top.

[@MrRICKDAWG4444]

These are what you're looking for LGEGE - 3/8", 25 Pcs Black Screw Thread Protectors www.amazon.com/dp/B07HY6FT3G/ref=cm_sw_r_cp_apa_i_LCtMCbYRFERQM however I'm not sure what size your whips are and these are kind of expensive. I would go to a auto parts store and ask for a vacuum cap in your size.

[@alcarriere2365]

@@MrRICKDAWG4444 Thanks so much for that link! Much appreciated.

[@MrRICKDAWG4444]

No problem.

[@tinesysoutdoorsmore2437]

Al Carriere what did you use to mount the driveway pole whips. I was going to go to my local tractor supply and pick up a couple of 3/8 fiberglass fence posts but been trying to figure out a way to mount a threaded end or find a mount just for the rod to slide into and maybe tighten down on.

[@coryhopkins4368]

This is such an awesome video. Thank you. I have a question. I am going to build five of these for myself and my family members. are the controllers different frequencies, or are the remotes different frequencies? Will all five fight with each other is my question and fear.

[@MrRICKDAWG4444]

Thank you. Yes the remotes will change every whip thats powered on and close enough.

[@coryhopkins4368]

If we are far enough apart when turned on, as to not interfere with each other, then run together or park together will it effect them then?

[@MrRICKDAWG4444]

No them being together won't effect the mode that they are running however someone messing with a nearby remote will. I found that almost all these remotes work on a likewise frequency and can work other whips in some way or another. If this is a concern they make bluetooth controllers that are a little bigger so you will have to mount the on the vehicle instead of the whip but then you will be able to control them with your phone and also dance with your music playing.

[@brianstanley4963]

First thanks for the great tutorial. I made my own with the controller that you linked. I'm trying to get them to stay synced with 2 controllers. any helpfult tips. thanks.

[@MrRICKDAWG4444]

Thank you. Ok so if you want to sync the two you need to start with one plugged in, find the mode you like and then power it off with the remote this will save the setting. Unplug the first one and plug in the second one and repeat the process. Now plug both in they should be on the same mode. If the timing is off hold the remote between both whips and press power on the remote to power them off, then press power again so they both come on at the same time.

[@bryannelson-airtimegrafix6954]

I did the same parts for my set of whips! and I could never get them to sync! so I just used one controller and split the leads goin to each whip! works awesome!

[@cowboy274carolina]

bryan nelson - airtimegrafix could you elaborate a little on this?

[@MrRICKDAWG4444]

Whip syncing imgur.com/gallery/hJDHr6K

[@chuck300mxc]

How do you adjust the pixel points to different areas of the whip ?

[@coryhopkins4368]

Hello again. This has been such a tutorial insight on led whips. My question is how can i integrate my turn and stop lights into my whips. I have built 19 whips for our riding group from your video and instructions. I have started using the btf-lighting ws2811 60 leds/m 20 pixels/m 300 leds, and found they do a few more functions than the 150 leds, not sure why? but they look good and are impresive. Thank you.

[@MrRICKDAWG4444]

Nice I'm glad you liked the video. This video was kinda intended for beginners i should really make a second video showing my new style i make that run more power injected leds and integrate with the vehicles Break,reverse, and turn signals and music. However i custom order my new controllers straight out of China so i cannot provide you with a link for them, they also cost alot more than most people wanna pay and they don't do many modes right off the back but you can make your own custom modes with em so that's really cool if you're creative.

[@jessegant4776]

Have you or would you do a video for a more advanced dual Bluetooth system thanks

[@MrRICKDAWG4444]

I do have a pair I'm making for a customer soon but they are gonna be set up assingle whips for jeeps. I'll try and set up the video showing how you would sync them as well.

[@canyonsteves2121]

I just bought a rzr and came across this vid. Amazing. I know its a couple years old so im wondering if you sell these now or no?

[@MrRICKDAWG4444]

I sell them for people that are local to me. I'm not into shipping them

[@xPZYCHOxKILLER]

Hey great video. My only question is that is there a way to sync two whips on the same atv to one controller and one wire running all the way to the battery, or would you have to run both to the battery? In that case would the controller pick up both sensors at the same time? Thanks

[@MrRICKDAWG4444]

Yes you can splice one positive wire from the the battery and ground both whips to the mounting bracket long as it's a good ground.

[@xPZYCHOxKILLER]

DMAX909 awesome, thanks for the info

[@MrRICKDAWG4444]

No worries. If you have any other questions feel free to hit me up with them.

[@Bxseck]

Can you do a video with the 60 leds per meter I know it’s more expensive but most makers charge 200 plus for those and it’s only like 10 bucks more for the 60led per meter kit. Ip65 same brand you buy.

[@brockandleah]

Hey man will definitely be making my own whips great video do they make these leds with a bluetooth controller

[@MrRICKDAWG4444]

Yeah they have a few to choose from. Just search WS2811 bluetooth controller in amazon.

[@brockandleah]

@@MrRICKDAWG4444 thanks man appreciate it

[@brockandleah]

Will the ws2811 work the color chasing leds

[@MrRICKDAWG4444]

The WS2811 is the style of led you should be using for this project so if you read in the description of the controller you choose it should list the LEDs that are supported. Most of the controllers will support the 2811

[@calilobbies]

Hey, thanks for the great video. The lights work for about a month and now one of them doesn’t light up. Only 2 leds will barely light up.

[@MrRICKDAWG4444]

You might have broke a solder point. I'd cut it open and start with a new controller first then go up the line.

[@buddyfreeze7204]

Great video, what do you use for the vehicle side of that plug and is it waterproof?

[@MrRICKDAWG4444]

I use these 5.5 connectors that you can get here.www.amazon.com/43x2pcs-Connectors-Security-Lighting-MILAPEAK/dp/B072BXB2Y8 I don't believe they're waterproof but i have never ran into a issue when they do get wet.

[@jmilla1991]

So you don’t need to run a power supply at all for this set up? I ordered the same connectors but also had the same question. Is it safe to just ground it to the vehicle, then run to a in line fused power to a toggle switch and then power up with remote or do to need a power supply just like one for in home use?

[@MrRICKDAWG4444]

Long as you order 12volt leds you wont need a power supply. You could ground at the whip and run one wire if you want. Just make sure its a good ground.

[@praterhowze5889]

Where could I get jusy the pole and quick connect?

[@JimIsGod4eva]

Dude, thanks for posting this video! I have a couple of questions though, what is the size and type of shrink wrap you used before you used the clear 3/4”? Also, the controller looks like it comes with the female end of the plug, what connection is that? I would assume I should be able to buy the male end, and then splice it into the battery?

[@MrRICKDAWG4444]

The black wrap is 1⅛" 3to1 adhesive shrink wrap found on Amazon. The plug you are looking for is referred to as a 5.5 male barrel plug. Hope this helps

[@cowboy274carolina]

@@MrRICKDAWG4444 Hey, cant find the 1 1/8 adhensive shrink wrap on amazon any way you could post the link?

[@MrRICKDAWG4444]

Type in 1.25" adhesive shrink wrap and plenty will pop up. Alot of the links in the description have expired and i need to re do them. Ive just been super busy lately and haven't had any time.

[@teamrhoden6]

do you have a video showing how to hook and install the wiring harness to the RZR? and what wiring harness to use.

[@MrRICKDAWG4444]

Yes i mad a video for a customer i made a set for i just haven't edit/uploaded it yet. Stay tuned

[@brianharrisphotography]

Awesome VIDEO buddy! Thank you for the detailed instructional video DMAX909! Can you update the links to all the parts used to make this whip? Some of the products don't seem to be available anymore. Also if you can get the updated links for the clear and black shrink tubing, LED strips, and any other items I'll need to make this.

[@MrRICKDAWG4444]

Thanks for bringing to my attention. I'll take a look at em when i get a free moment I've been super busy all day.

[@brianharrisphotography]

@@MrRICKDAWG4444 Thanks buddy! Can't wait to get started on mine!

[@rubenguerra7744]

Where did u find the thick shrink wrap u used on the bottom of the whip???? And also great job on the video !!!

[@MrRICKDAWG4444]

Thank you for your Comment, You can find the thick shrink wrap on Amazon in shorter pieces but this is what i get in 4ft lengths because i use alot of it.www.amazon.com/Black-Heavy-Adhesive-Lined-Shrink-Tubing/dp/B00NVDFQWU

[@rubenguerra7744]

Thx for info ..... u convinced me with ur video to try to build 2 for my sxs.... thx again

[@MrRICKDAWG4444]

You're welcome it's super easy. Feel free to reach out to me for any other questions you might have in your construction.

[@lukevaidyan7197]

@DMAX909 Very informative. Thankyou. Requesting some advice. I have a 10 foot, two piece whip which would require almost 9.3 meters of ws2811, 60 led/meter strip to cover it entirely. I stay in Dubai and the desert drive whips must be longer than usual. A 5 meter strip can cover the lower half of the whip. Question is, when i inject power to the second strip, can i draw the power from the same Dc 12v driver or should i use a separate driver?

[@MrRICKDAWG4444]

I would run separate power and ground wires under the first strip up to the second stip. You could run it from the first power source. Be sure and watch my part two video on my channel

[@lukevaidyan7197]

@@MrRICKDAWG4444 The second video answered all doubts i had. Thankyou . 👍🏻💐

[@MrRICKDAWG4444]

Nice. Glad I could help

[@huntert4029]

Where can I buy the heat shrink at in a store like parts store or something??

[@user-pz2xm2xn1v]

Can you connect 2 whips together with out losing brightness ? or how could you do that

[@dtank77]

Sweet video man. I was wondering on the voltage. The description on amazon for the light strip says nothing over 12 volts. I have a 2018 polaris ranger 1000 and they put out 14v when running. Will it still work fine?

[@MrRICKDAWG4444]

Yes. The battery should be 12 volt. Your alternator charges the battery at 14 volts most likely

[@dtank77]

DMAX909 if i check the voltage at the “plug and play” busbar, the voltage is still 14v. I believe that connects strait to the battery

[@MrRICKDAWG4444]

I wouldn't think it would be much of a problem however if it concerns you, you could put a 12 volt voltage regulator inline between the battery and the LEDs for peace of mind.

[@dtank77]

DMAX909 thanks i will keep that in mind stuff should be here tomorrow.

[@dtank77]

Ok so i got the lights and have them plugged in the wall. The lights come on seems be in auto mode i guess, doing all different colors. But i can not pair the remote to the lights. I read the directions but nothing is working.

[@trevor77yfz]

What kind of wiring harness would you need to plug these in on a utv? I noticed you have one that plugs in the wall.

[@MrRICKDAWG4444]

That's just a 12v converter in my video you can wire it a ton of different ways. I would just go from the a 12v source in your dash then to a switch and then to the whip.

[@dustingaudet1428]

Hello, thanks for the amazing video!! Im trying to find a bluetooth controller that will work for these and still has the same functionality if not more than the one you recommend. It's hard to keep up with a remote when on the trail... Im not finding a bluetooth controller that has the same functionality like the stacking, do you have a recommendation?

[@MrRICKDAWG4444]

Thx. I use the sp110e controller found on Amazon for tight spaces.

[@dustingaudet1428]

@@MrRICKDAWG4444 does that have the same functionality...I saw a previous post from a while back that stated the bt controllers have less functions

[@MrRICKDAWG4444]

That particular one has 120 settings, every static color speed and brightness and a easy to use app.

[@brianblack6256]

After you Made the whip the controller has the barrel plug that you used to connect to the wall adapter. what kind of barrel adapter did you use (or cut up) to mate to the controller barrel Connector to wire into the machine? Thanks

[@MrRICKDAWG4444]

I don't use the barrel plugs anymore they are a fail point. Check out the part two video on my channel where I unsolder that connection and hardwire it.

[@timmorford6711]

This is an amazing video!! Nice work. Live in southern utah and am interested to show off your product. How much for a set of 4 footers?

[@MrRICKDAWG4444]

Thank you i appreciate it. I don't currently have a store i just build these for myself and friends. If you would be interested in buying some it would have to be done through pay pal. I charge $300 a set

[@timmorford6711]

@@MrRICKDAWG4444 does it include the quick release too?

[@MrRICKDAWG4444]

Yes everything is included to mount and wire

[@timmorford6711]

@@MrRICKDAWG4444 could you provide me your email to get a hold of you? Ty

[@MrRICKDAWG4444]

My email is [e-mail]

[@chriswikeen3743]

I built one of your light sticks last year and lost the remote hand held controller. Will I need to replace the controller on the light stick and get a new hand held remote or cam I just get a remote and get back to having fun? Thanks so much for the info.

[@MrRICKDAWG4444]

Most remotes use the same frequency so yes you can. However look into my part 2 video on my channel

[@byronroyal1882]

Great video! I have a question about the 2 wires that aren't being used. The white wire and red wire. What are they for?

[@MrRICKDAWG4444]

The Green wire is always the data wire. The other two wires are for 12v power and ground. The two extra wires that some strips come with are for power injection if you are running multiple strings.

[@byronroyal1882]

@@MrRICKDAWG4444 thank you. I'll be giving this a go over the weekend. Well done

[@MrRICKDAWG4444]

Awesome. If you have any other questions along the way feel free to reach out to me.

[@nikkibohanon5136]

Great video, I’m trying to make an 8’ whip for my atv, I read your comment about running an additional power wire for the second strip on top, is this the only option or does someone offer led strand that’s around 30’ that doesn’t need additional power supply. Thanks in advance.

[@MrRICKDAWG4444]

Wow 8' is pretty tall for a quad, legally it only needs to be 7' from the ground that being said you can contact the manufacturer of the leds and they can supply you with a longer roll however it's easier just to solder them together see my part 2 video for that. As far as needing power injection wires that's really only necessary if you intend on running solid white because that uses the most power and without power injection you will notice the top of the whip won't be the same color white as the bottom. Hope this answers some of your questions feel free to reach out with anymore you might have .

[@nikkibohanon5136]

@@MrRICKDAWG4444 thanks for the quick response, we are riding little Sahara state park Oklahoma, they require 10’ from ground to top of flag, it’s ridiculous I know.

[@MrRICKDAWG4444]

@@nikkibohanon5136 Oh wow that's definitely a little excessive on the 10' rule. Those dunes have always been on my bucket list thanks for the info that's good to know.

[@tshockley303]

Compressed air may make the clear sleeve go on without using solvents

[@MrRICKDAWG4444]

It definitely helps but it's still tough. Soap or wd works the best for me on six footers. You can get away without using anything on a four footer.

[@kurtm534]

What do you use and where would you get the antenna and connector if you don't have one to tear a part and just want to build from scratch?

[@MrRICKDAWG4444]

The base where you connect it to the vehicle is the most important if you're going to be using it aggressively off road so i generally start with a "5150 day whip" that you can find on chaparral motorsports web site. Ive also taken plain 3/8" fiberglass poles and made my own quick disconnects using air fittings and jb weld to attach one end to the the pole. Hope this helps, if you have any more questions feel free to reach out to me here or on FB and IG.

[@cperkins1924]

Wanting to do this and have a CB connected to the antenna as well. Will the LED lights cause a distortion at all?

[@MrRICKDAWG4444]

Yes i would dedicate another antenna for the radio because it will mess up your SWR's and possibly hurt the finals in your radio.

[@kevinhembree9097]

Are they Bluetooth controllable? Excellent video enjoyed watching it.

[@MrRICKDAWG4444]

The controller i used in the video was not bluetooth capable because the customer wanted more modes. With a bluetooth controller you are limited on modes, however one could use a bluetooth controller in this application but would need to mount it on the vehicle somewhere instead of in the whip because they are a bit bigger.

[@kevinhembree9097]

Thanks, can you sync them together if running dual whips?

[@MrRICKDAWG4444]

Yes you can. Just splice all the wires together.

[@304trails8]

i built two 4 foot using all your suggested parts and after about two weeks they suddenly shut off and would flicker if i hit a bump checked all connections and they look fine. tore the whip back down and just touched the strip to power and it lit up in spots. tried the controller to power and nothing. did the controller take a dump on me? if so is their a higher quality bluetooth one to run off my phone that is water proof?

[@MrRICKDAWG4444]

You can make the sp110e Bluetooth controller waterproof but you will have to split it open and incase it in silicone to be waterproof there is a controller out there thats waterproof proff but it is limited on the stuff it can do as far as presets go and it's 5times expensive so I usually use the sp110e. Also Set your whip up so it has a 3pin connector coming off of the whip so you can change controllers without striping the whip down.

[@she_loves_gabrielm7124]

Can i controll them with the phone?? And how you set it up

[@fullyford]

this was a roll of 150 led's. I know you can get them in 300, so thats twice the led's in the same roll, would you stay away form that or would it be fine. also if I did two of these can they be synced together somehow

[@MrRICKDAWG4444]

It's possible however there is a few factors at play once you close the separation of LEDs by adding more per foot it will start blending colors at a distance and will look way different than one with less LEDs. Most importantly after around 150 LEDs you need to start power injection if you want to run solid whites, without it the whites will fade to amber at the top of string. Hope this helps.

[@eddiekytia]

New to your channel and if you happen to read this do you know where I can still find that kind of whip? I went to 5150 site but they only have a bare whip that's magnetic instead of that air fitting. I dont think I'd trust a magnet to hold up off road...lol.lol I could be wrong but.........GREAT VIDEO AND GLAD I FOUND THIS!

[@MrRICKDAWG4444]

As far as I know the air fitting style is discontinued and you can only get the magnet style fittings these days. However rest assure the new magnet style are almost to strong even stronger than the air fitting style. I promise you will not break it or have it accidentally come out. It's that strong.

[@eddiekytia]

@@MrRICKDAWG4444 WOW... cant believe you seen my question AND ANSWERED THIS FAST!!!!! thank you I really appreciate it! Yea I looked into the magnetic base on KZbin and IT DOES LOOK BEEFY. How has your homemade whip held up? I was looking for a 2 or 3 ft whip for a high powered e-bike for night rides and the 200 dollar price is a little crazy at this time ( 2020 ).... but yours can be done under a 100...EASILY! By the way would you happen to know the wattage/amperage draw on your whip? I'm running this off a external 12v battery not a engine! THANKS AGAIN!!!

[@eddiekytia]

@@MrRICKDAWG4444 I just sat to go through some of your videos and see you have a new video on these.... going to watch now!

[@MrRICKDAWG4444]

@@eddiekytia they are pretty low amperage and somewhere around 77watts per roll (16.5 feet) I've ran a 4 foot whip off of a 9volt battery for a few hours.

[@betosn18]

This is great video! I just wish you would had linked the male dc connector, the end caps you use, the thick heat shrink you use down by the controller the little details

[@MrRICKDAWG4444]

Thank you. For some reason KZbin wouldn't let me link as many of the materials used as i wanted so i linked the main one's figuring people could figure it out from there. Basically everything is found on Amazon the dc connection is a 5.5 barrel plug, the shrink is 1.25" 3to1 adhesive wrap and the end caps are 3/8" vacuum caps that come on the daywhips linked in the description. Hope this helps.

[@betosn18]

DMAX909 i figured id look up a few stuff on amazon, thank you tho this really does help!

[@MrRICKDAWG4444]

No problem good luck with your build.

[@betosn18]

DMAX909 while choosing for led lights i noticed there are different options on the link you posted do you know what the difference is? Also the clear tube shrink wrap what size is needed, i just ordered 2 5150 day whips.

[@betosn18]

DMAX909 i ended up ordering the 5m 60leds/m IP67 in black from the link you posted, i hope those are the correct ones lol

[@nickomode1239]

Good video. What did you use for the top of the whip to seal it?

[@MrRICKDAWG4444]

Just a 3/8 cap then the shrink wrap seals it water tight.

[@nickomode1239]

And if i wanted a pair would i have to by the two wireless controllers? Or could i just connect them together to one.

[@MrRICKDAWG4444]

I build them differently when syncing a pair. But yes you splice one controller to both whips.

[@Latenightfab]

I have a question I have two cb antennas on my semi, and I want to do the leds on them like this. But I don’t want to have to have two different remotes I want to be able to control them both at the same time doing the same thing, any advice on a controller that can sync them together and control both ?

[@MrRICKDAWG4444]

Any controller will work in a sync long as you slpice them both together to one controller i recommend using a Bluetooth controller for this, specificly the sp110e. Also use dedicated antenna for keying up on the radio because the leds will screw up your SWR's and that can lead to frying the finals in your radio.

[@sxsKentucky]

Quick question I’ve been looking for a solution to fix my whip lights because when I turn the power switch on in my rzr the whips flick at the bottom for a quick second and won’t power the whole whip, is there a solution that I could do to fix this, like is it a power problem, something easy to fix or are they trashed because of the company I bought them from?

[@MrRICKDAWG4444]

Sounds like you just need a new controller. It could be a number of problems but I'd bet your controller is bad.

[@mikesouthworth1999]

I am KZbin illiterate, where do I find the "description" you refer to? Looking for the info on parts to build some of these. Great work

[@MrRICKDAWG4444]

If you're using the app from your phone it's a little arrow next to the name of the video you click and it will drop down the description.

[@juanpestrada5231bdndjkdn]

DMAX909 so you only need one controller for two whips install in one car?

[@MrRICKDAWG4444]

Yes a single controller can operate 1024 LEDs

[@gabeparker2461]

Hey thank you brother were you able to make a list of all the materials needed

[@MrRICKDAWG4444]

Check out part two I put together a list in the description

[@scatpackla3923]

Where could I get a light whip pole from

[@johnclayton47]

So to connect this to a 12v supply do I just cut the white connection off and wire the power and ground to a battery?

[@MrRICKDAWG4444]

Or just use a 5.5 male connector to match the female side the controller comes with. Your call on that conection

[@joshfraley9272]

Hi do you have a link to where you can buy the power/ground supply connectors? Looks like I need a connector to the controller for power and to the whips itself?

[@MrRICKDAWG4444]

I'm not sure i understand your question. I usually solder everything between the controller and whip as for the connection from the vehicle to the controller i use these. www.amazon.com/Pigtail-Female-Connectors-Security-Adapter/dp/B07C7VSRBG i hope this answers your questions, Feel free to reach out to me with any others you might have.

[@joshfraley9272]

DMAX909 thanks that’s what I needed. I missed the part where you soldered them.

[@jaystout4283]

Hey bud watched the video and had my first whip almost finished. I was putting the clear shrink over the leds and the clear rubber coating started popping and cracking and coming off of the leds........ have you ever had this problem?

[@MrRICKDAWG4444]

Yeah the fist one i ever did i had that happen and i found you just need to have everything ready wrap fast and get the shrink wrap on as quickly as possible. Also if you're using a whip smaller than 3/8" dont wrap the leds as tight.

[@austinmabry8462]

FYI, That little chip is actually a buck converter which drops the voltage down to 5v for the actual chip. That's its only function. The LED chips themselves all contain their own 'brains', which is what makes them capable of individual addressing.

[@MrRICKDAWG4444]

Oh, ok. Why do the 5 volt led strips have the buck converter then?

[@austinmabry8462]

@@MrRICKDAWG4444 Actually, you are right. I thought these were 2812 lights you were using, but you're using 2811, which are, in fact, controlled by a separate IC. 2812 lights have the circuit within the LED itself. My mistake!

[@MrRICKDAWG4444]

Right, that's what i was thinking. You had me confused for a second i wanna try using the 2812's but i cant seem to get those mini controllers to work with them even tho they say they are compatible.