How to Make a Line Following Robot without Microcontroller

[@ilyesilno4640]

Hey guys i swear god it works for me very very well without any problem thank you tapendra mendal well done

[@chinjao1860]

hey what is the component between the two sensor???! Its in the middle the one that leads the way . Pls i badly need it help me

[@ilyesilno4640]

it's just a small wheel like table's wheels

[@gaddamnirnaya4695]

What kind of strip(path) is being used. Is it any special strip or just any normal black tape?

[@umairmujahid7518]

It should be perfect black body

[@tushargoyaliit]

Hey can u please help with the circuit at 0:47

[@SandeepKumar-du1ns]

Bhai isi year kisi nit se btech krunga..... circuit designing seekh kr sabse pehle isse banaunga Thanks a lot!

[@Ryanvinceify]

hey thanks for the tutorial, but can i changes the motor with the faster motor than motor in your tutorial?

[@anakrantau6415]

This tutorial: kzbin.info/www/bejne/nGW0eX9tiN5kaJo

[@prelectricianelectronics4663]

how to do godown wiring, how to godown wiring

[@spidecraftplayz9656]

Bhai I should introduce u to my eng teacher

[@Subswithnovideos-gv9qi]

how does the motor rotate the whole body of car on turns and curves, i mean the rotating mechanism (castor wheel) is not powered by any source, and bo motor's shaft is also fixed, (means it rotates only on one vertical axis), then how does car change itself direction

[@lg-xt5pn]

Add a couple relays and you can add in giant Motors

[@jameswebb8162]

Sooo awesome!! My son is eight and he loves ROBOTS!! I swear that he is leaps and bounds ahead of me when I was that age in figuring out electronics! Heck, I gave him my digital multimeter with a built in oscilloscope when he was 6 and he loved it!! In the garage he has his own work table near mine where I can watch him work on his projects. Anyways....thanks for the video and info on the robot!! I can’t wait to show him!!!

[@nidhibiswas8589]

Great work...👌👌

[@1230-o6r]

You are a professional robotic engineer.

[@digitalghosts4599]

Very nice! Actually this can be built with even less effort using ready-made modules - there are plenty of IR modules available and also H-Bridge module so no soldering would be required, just joining the cables together! :)

[@srinukarthik9906]

wonderful bro i done this robot to my school science fair.wonderful explanation

[@engineeringsutra6483]

Best video sir. I am making this project for my class....thanks for giving sucha video

[@thinkbeyond5360]

U should use or sensors and motor driver

[@rifatfaisal4743]

dude you just saved my semester thank you so much

[@adityapattanaik6021]

the main circuit board u showed is bit difficult to solder

[@smellfish1430]

This has blown my mind into space

[@tapendramandal]

+Smellfish hehe

[@animapj]

Awesome video Man, Keep it up!👍

[@STRATOS13PAO]

nice video, it always nice to see a project without a micro, everyone is using them nowdays (including me!)!

[@tapendramandal]

+Stratos Vasilas thanks for watching

[@chriskon3319]

excellent job, very good

[@tapendramandal]

+Enrique Thank you

[@AbhaySingh-ho3ni]

can i use 3 pinned ir reciver if you reply i will surly subcribe your channel

[@LunaticG]

Indicator Too ? Awesome !

[@SURESHYADAV-ig7gi]

hi can u help me where i get he ckt dia. for this

[@bholanathmanna5916]

very very good Tapendra Mandal

[@tapendramandal]

+BHOLANATH MANNA thanks

[@vartiksingla8416]

awesome man..👌👌

[@rounakroy2275]

Undoubtedly the best video on this topic... and keep making more videos....:)

[@arijitbanik3139]

For me and for other friends those who like your youtube channel Can you please make " Motion Detector " project with IR Transmitter & IR Reciever... Minimum distance of " Motion Detector " must be 1 hand distance...........

[@arijitbanik3139]

👌 Excellent project bro...... you are great....👏

[@tapendramandal]

+Arijit Banik thanks bro

[@jatinchauhan9111]

Hey! Can you make me understand that how do you set your camera for making videos? Please make a video to show us that how you set your camera for making videos?

[@vaibhavrao1974]

this is the best video ever of line follower robot

[@tapendramandal]

thank you so much.

[@vishal01mehra]

what if I eant to increase speed of the robot?

[@life_of_kai__]

Remove the voltage regulator, it will give you more speed

[@vishal01mehra]

Thanks

[@byNinjaz]

where is the voltage regulator?

[@life_of_kai__]

The mosfet connected to the battery is nothing but the voltage regulator. It outputs 5v from the battery's 9v... Remove that and just give a direct connection of 9v

[@essaalharbi1413]

Vishal Mehra By PWM

[@SERTECMANUTENCAO]

Perfeito, parabéns pelo trabalho.

[@shreyanshshrivastava224]

hey I want to ask that you have removed only the buzzer from the ir sensor circuit.... please reply fast....

[@shreyanshshrivastava224]

Yr reply kr dia kro

[@shreyanshshrivastava224]

Please help anyone

[@sandhyabhat8713]

Yes

[@Devil-dn2ew]

No the circuit is different

[@AllAmericanFiveRadio]

Thanks for this video of a working circuit. I was looking for an infrared censor circuit for a Makers Fair project. I modified it for my purposes and it works great!

[@vasishtaramgundam4436]

How to make that middle board for using only one proximity sensor

[@AbhaySingh-ho3ni]

why you want to do that so

[@dkkumawat5063]

SUCH A GREAT IDEA . KEEP IT UP

[@tapendramandal]

+D k Kumawat thanks

[@rippanbansal2742]

bro at 4:37 in video u are pointing a wire. what is that

[@yaminhossain9266]

that is a jumper wire for IR proximate sensor

[@aishwaryadubey4836]

I made this in my mini project... M appreciated by all. Thanks for idea

[@msvnr1951]

Did it work? And what prize did you get?

[@rippanbansal2742]

also there are three pins in ir transmitter so how to connect that 3

[@quickquicky1640]

RIPPAN BANSAL yeah I wanna know about that

[@physicswithhriday]

One is left ideal

[@thejr.engineer5662]

nice work.. wooden blocks are heavy for the motor..

[@facilitation4216]

Great👏👏👏

[@fouzanjavaid9049]

Can i use IR sensor in a line follower robot? Please tell me the answer. Its urgent.

[@madhurjyabezbaruah5703]

What are the components required?

[@syedahad4557]

Is it necessary to have a white floor for working of the robot or it can work on any colored floor ?

[@harshitsaxena5602]

Tapendra mandal pls tell do we have to set the potentiometer

[@tapendramandal]

+Channel awesome yes

[@AbhiEducationFactory]

The BO motor part didn't working. What I can do? Please reply plz................

[@rockin537]

How to make a quadcopter ... I want the video brother.

[@deadpoolreborn5322]

Rock In whats your budget bro

[@rockin537]

Shivam's Mystery my budget is 3000 rs

[@crazycreatorcrazycreator9102]

Rock In

[@rakshitbhatt4168]

Rock In bro i have all theoretical matter.... lol but the point is i dont have enough money to make it need a investor lol...

[@rakshitbhatt4168]

Be simple ok bro let me ping u up

[@yashwantrao7594]

I like ur neatness man

[@tapendramandal]

+Yashwant Rao thanks

[@mrahulreddy6808]

Whats was not and good to try make a post of video full data only if it is perfect i had tried cnc but the software problem u had not provided full detail of all software that which need to run

[@tapendramandal]

+Rahul Reddy.M bro already answered such questions before.. please scroll old comments.. hope you will get your answer.

[@mrahulreddy6808]

***** but answer given not correct

[@mrahulreddy6808]

***** u have shown g code but the software don't have that i had downloaded the unicorn g code extraction but the software showing error while saving

[@innovation7418]

But com port-3 is not available in Windows 7 ,isn't it?

[@hasanshahriar3404]

Rahul Reddy.M i had tried the CNC project. it worked fine, no software error or complexity.. just my pen holder was connected loosely that's why plotting was little bit imperfect. and the COM PORT problem u have told is not related to inkscape or processing3.. when you connect your Arduino, automatically it allocates a port. It's not necessary to be the com port no is 3... if any com port isn't allocated automatically after connecting arduino, please update the Arduino driver... [ i have faced this problem n fixed it] +Tapendra Mandal, you are doing really nice job. upload more arduino & raspberry based project video.. oh, IOT too.. Fun fact: i never used an soldering iron before and fried 2 DVD stepper, 1 L293D .. But finally i made it.. 😎

[@aplicarciencias]

I loved that! Great job! Thanks

[@spiritualguru9050]

Circuit is wrong!! Connect 3rd pin of ic lm358 to +ve of receiver and 2nd pin to variable resistor.(note: By mistake he changed connection for 2&3 pins I mentioned it ,to verify this see his video of making ir sensor [link given in description] in which he connected correctly :->

[@kiranstech]

I made my own using this video... kzbin.info/www/bejne/qGa6dJJ_pdVroNU Connections are fine!

[@aryankhullar3508]

Hey brother just tell me which is right circuit In video or description link ?

[@mundeer_06]

you are great Tapendra Mandal

[@shahidilhan3139]

how is the robot turning?

[@kumkummaurya1325]

because it has line sensor

[@shahidilhan3139]

Kumkum Maurya yeah I know but all the line sensor does is send signals right?

[@LGBender]

What do you mean? IR sensors send signals to the motor driver which then adjusts the speed for each motor. Turn left? - Right motor runs faster.

[@tapendramandal]

+Zerro looks signaling problem

[@maharshi9999]

If left sensor is on line, right motor is in on and left one is in off. So it will turn left. This process will be faster.

[@luffymonke0810]

Thanks I am making this for science exhibition

[@hemraj5270]

what are the material you used .please can you say

[@tapendramandal]

+hemraj please check description

[@hemraj5270]

thanks

[@fakeezel]

Its a clean and understandable job. Thanks 4 it !

[@aleemilyas5671]

plz AGR ap is video pa sath sath boll kar guide kara to sahi samaj laga gi

[@anakrantau6415]

Watch video make robot line follower with. Coding: kzbin.info/www/bejne/nGW0eX9tiN5kaJo

[@mdhannan8126]

অারঔ সহজ িকছু নেই

[@fouzanjavaid9049]

Can i use ir sensor in l293d to make a line follower robot? Please tell me the answer. Its urgent.

[@rippanbansal2742]

how much costly is this project? plz reply fast

[@tapendramandal]

+RIPPAN BANSAL Rs200

[@jaleelahmed8901]

2 BO motors alone cost Rs 200/ plus 2 wheels Rs 150/, driver ic plus 2 set ir sensors, another Rs 100/ total a minimum Rs 500/ .

[@kunalaglave4326]

Don't buy parts online ,it will costly

[@AbhaySingh-ho3ni]

elecroncomponents.com there it is cheap

[@electronic7979]

Excellent project

[@adityarai7674]

can you give code with microcontroller

[@tapendramandal]

+cartoon lover no need to use microcontroller.

[@nabamoran9142]

very nice

[@fouzanjavaid9049]

Can we use l293d ic in a line follower robot?Please tell me the answer. Its urgent.

[@unknownuser9255]

How to make battery tester

[@rupantaradhikary1482]

Yor projects are good net and clean i like it

[@satpathy.debiprasad36bapu43]

I want to bye complete this project how much price

[@anakrantau6415]

Watch next videos:

[@RampalYadav-up3is]

What you used under it'like a white cylindrical box'?

[@rippanbansal2742]

my model is not working

[@neerajnarwal9558]

mine either

[@barindersinghjandu847]

RIPPAN BANSAL why?

[@ratanlal4772]

Aditya Mhatre there is no Arduino there is no need for programming

[@عليالعصماني-ذ9د]

احييك على هذا الاختراع الرائع👏👏

[@pachade7113]

Witch component use in video pzz make vidaut using pvc bord

[@nemethlaszlo3470]

Hello! I did the printed circuit board design for the engine controller. If you should, just write! Thanks for the idea for the version without microcontroller!

[@IDEAMakersMasters]

we are not engenieers 😈😈😈😈😈😈😈😈

[@amaeyparadkar9632]

Awesome! keep it up! 👍

[@tapendramandal]

+Amaey Paradkar thanks

[@rockin537]

Bro I do it......

[@jituchauhan9463]

Rock In hii bro u use exactly circuit diagram which is shown in this vedio ??

[@49_hiritikgupta88]

hey how much money you send to make it

[@tapendramandal]

+Anuj Gupta check the link in the description

[@pranavsatpute7656]

Tapendra Mandal I made this line follower but 9v battery frequently draining so can we replace 9v battery to 12v ?? and how ??? please help

[@umairmujahid7518]

tell me you have followed the same circuit diagram which is shown in the video

[@siddharthanghan2221]

how can we use L293D motor driver as that circuit witch u made.plz tell me soon

[@rippanbansal2742]

bro reply kar diya karo

[@PawanKumarZilla]

RIPPAN BANSAL u can watch my projects too , I have worked on lfrs , if u have queries u can comment on my videos kzbin.info/door/SYKzTtk_Hm5tedon4auo4Q?app=desktop

[@abdullahqureshi9860]

Hey! The circuit works fine and i bought ir sensors seperatly they also work but when i plugged all parts the circuit worked but the motors dont start until ir sensor is blocked but it should be like this that the motors should keep working until the ir sensor is blocked and then it stops the motors Please help me with this

[@aashish-1224]

did you get how to start the circuit with the readily available ir sensors as i also couldnot make the motor run

[@ondergunes3149]

first yorum

[@tapendramandal]

+Önder Güneş yo yo

[@ondergunes3149]

Thanks

[@ondergunes3149]

isimsiz 49 her yerde belli ederiz kendimizi skshshjw

[@zeno1504]

what is that circle device beside the proximity sensor? Pls answer me ASAP

[@sarthakniranjan8646]

second comment

[@tapendramandal]

+Technical Purush Thank you

[@sarthakniranjan8646]

Tapendra Mandal you do pretty nice tutorials

[@sarthakniranjan8646]

Tapendra Mandal think about using a raspberry pi

[@temitopebabatola953]

theInfoBimfo RoXXX Thanksgiving y

[@luminousshadow8300]

The vedio is great.....i like it.....but please try to add few explanations for people who are new to these areas...... The rest is great .....

[@JEET_NATH]

very good and mindade work .........ceeptup

[@tarunadhithya8841]

Hi where do I get the 7805 module

[@ozairshahid667]

and plzz tell me how you add those pin headers on or sensors

[@tapendramandal]

+ozair shahid pin8(vcc), pin4(gnd) and pin1(signal)

[@aquacultureaquariumsgoa3995]

excellent projects

[@arjunchoudhary3908]

plz can u tell from where will i get these components needed for making this awesome robot.

[@tapendramandal]

+Arjun Choudhary check description and follow the product links

[@arjunchoudhary3908]

how much is the total money spent on it

[@joshvenie2024]

can this run in a dimly lit environment if the black line is painted on a light grey floor? I am thinking of doing a track in my garage with low/no lighting

[@tapendramandal]

You just need to calibrate according to your environment and floor

[@rajnisah8207]

Really nice video .. Can you pls give some tips on increasing the speed of the robot.

[@tapendramandal]

+Rajni Sah use high rpm motor

[@muhammadardiansyah8513]

Sorry sir i want to ask for ic lm358 pin 3 it instead of positive pin but why the pin schematic is negative.

[@tapendramandal]

+Muhammad Ardiansyah maybe some mistake

[@s.rsahir]

Owesome And I like Your Replaying

[@nikhilrs8495]

Very much useful sir...

[@tapendramandal]

+Nikhil Srinivas thanks

[@yaminhossain9266]

Tapendra Mandal brother ,can you please tell why did u connect 7,8 and 9,10 pins all together.because pin 7 or 2A is a input pin buy you gave 5v to it and same for pin 10 or 3A.plz reply as soon as possible cz i'm working on it.

[@tanhshiong6588]

Good day.... I just wanna ask if.. we will add another two sensors, where should we put it? thanks..

[@tapendramandal]

2 sensors are enough..no need to add extra sensor

[@fouzanjavaid9049]

Tapendra Manda sir please tell me can i use IR sensor in a line follower robot? Please tell me the answer. Its urgent.

[@AkashSingh-mc3yq]

bro it was a very nice project but did u use proximity sensors in the front.plzz help

[@tapendramandal]

+Akash Singh yes

[@rajadas5623]

tnx bro!!! for this!!😊😊😊😊

[@tapendramandal]

wlcm

[@drozdzownica]

what is the name of part in 0:33? i dont know how to call it and cant google it :/ pls help me. i want only name of this black cube part which u put into Zero PCB

[@theengineerbro5088]

bhai can i use total circuit for L293D which u gave in description

[@addy.is.live1]

loved your work

[@ilyesilno4640]

Can i use LM7805 in place of K7085 and what is the object in 1:56 please respond me as fast as you can

[@sandhyabhat8713]

Can we use 7404 IC instead of L293D

[@farhanmuhammad9947]

no

[@deepakkumarsahoo2601]

Hii sir ...can u plz tell me that the color connection u used is only for showing positive and negative ....or any thing else.. because there are some portion in circuit diagram where both color are overlapped.are they connected or not...

[@49_hiritikgupta88]

hey kya aap bata sakte hai ki aapne proximity sensor me speaker ke badle kya lagaya hai

[@tapendramandal]

+Anuj Gupta speaker nikaal diya hu

[@sumitsarkar4019]

you made a nice tutorials. can i increase speed by using 12V battery?

[@tapendramandal]

+sumit sarkar yes

[@kuamir573]

Genius man wtf 👍👍👍

[@fouzanjavaid9049]

Can we use wires in a line follower robot.Please tell me.Its urgent.

[@alimuthohari8507]

create module IR 1 and 2 in the back circuit is missed, can you explained? or other videos? thanks.