How to make a MINI soldering iron with 18650 lithium battery

How to make a MINI soldering iron with 18650 lithium battery
---------------------------------------------------------------------------------------------------------------------------------------------
About Apour Maker Channel:
This channel is all about DIY, How To, Home Made, Great Ideas, simple, funny and entertainment.
---------------------------------------------------------------------------------------------------------------------------------------------
Music:
1:Advertising by Rafael Krux
2:Power_Shutoff
3:Dance_of_the_Mammoths

[@user-ys2ew1wi3d]

สุดยอด​มาก​ครับ👍

[@rickyricardo3380]

Totally works. I used the charging port of a vape (electronic cigarrette), connected it to a 3.7v battery, added a switch then a piece of nichrome wire from a heater. When turned on, it glows red hot and I use this to draw on wood and leather(By burning it). It can be easily modded into a soldering iron.

[@aleksansarkrajisnik8163]

How long does the battery last

[@kevinmarrie3295]

I turned a vape into little flashlights before, and I turned a vape into a coffee, milk, frother My aunts frother broke so I took the little spinning piece off and took a little DC motor, fit it inside the vape added a button and you hold it down into the milk. It spins and makes the milk frothy, and it was from her favorite type of Vape that she discovered while visiting me in Miami so now when she went back home, she has a souvenir vape that recharges and froths her milk for her cappuccinos 😂 Now I did have to find a pen for writing with in order to get the little metal piece off the tip where the tip comes out and mounted it to the vape mouthpiece so that it holds the little spinning piece in place properly. A lot of little fabrication, but it was really fun. What I have here now given to me is a $200 hair volumizer that heats up to 450°. And two heating hairbrushs.. Now I am wondering how I’m going to fabricate them into a soldering iron or something else. 😈🤣 The ladies in my life know that I love these things and they offer me their devices when they don’t want them anymore . I can’t be trusted with these things.😁

[@souravbhattacharyya3392]

Great 😃

[@tymflasher]

good job..

[@parvprobots797]

nice brooo

[@SumitKumar-ym5it]

What is the swg of the wire you should use for the bit of the soldering iron you should make.

[@bonagirisai2659]

I like it

[@Tell_reddit]

Keep it up bro👍👍👍

[@tranthanhsang9839]

good

[@blaze_spider]

I am proud to be an Indian 🇮🇳

[@SevenDeMagnus]

Cool

[@furik261]

Приношу свои извинения,я только что собрал без корпуса и всё отлично работает,жарит моментально,сюда бы ещё на 18650 поставить плату защиты и всё будет супер!!! Спасибо большое за Идею!

[@user-lq6yu5vg2d]

ну как успехи? много аккумов убил?))

[@furik261]

@@user-lq6yu5vg2d всё прекрасно работает,я уже три штуки сделал), я параллельно соединил 4 акума из под сигарет и вуаля,разряжаются до 3.65 и всё можно заряжать,а то что ты там чудишь с аккумулятороми так это твои проблемы)

[@user-lq6yu5vg2d]

@@furik261 я еще ничего не чудил. только собираюсь)) просто смущает то, что аккумы без защиты и т.д.

[@Nuhzar]

Необходим установить защиту от полного разряда или пользоваться акк-мом с защитой.

[@ramonfermin101]

Saludos no será peligroso trabajar de esa manera con una batería de esas 18650

[@nurhidaduraga3451]

👍👍👍

[@frikkiesmit327]

Cool music

[@HarshSharma-wc6sr]

Jo tar garm hogy vo tamba ha ya konse ha

[@mahaveergoyal9576]

Giveaway of soldering iron please 🥺🥺

[@zamSEG]

hello sir, could i use the ready made soldering tip for usb instead of making like yours?

[@apourmaker6055]

Yes, you can use a ready-made USB soldering iron tip. kzbin.info/www/bejne/nIbRk2WteMqCoNU

[@zamSEG]

@@apourmaker6055 thank you very much sir for your reply. i'll check it out.

[@zamSEG]

@Jamie Layne really? 15 minutes... but it worked? nice...

[@make9712]

👍

[@couragemasayile5161]

Bas

[@shanmukvarma721]

Can we use aluminum wire instead of copper wire tip

[@ayeshaakther222]

You can but copper is better I think

[@alexb9145]

Can you show me how to make a aligattor handle tha you using to handle DC motor 🙏

[@aizhtong2614]

nice video!

[@ahmadsyahmi351]

hi how to increase heat of a 30w solder to that of 60w solder? is there any way?

[@themastereal8345]

Replace the wiring in your soldering iron to decrease the resistance to half and you will have double the current outputted, 60w.

[@classydarktoys5731]

You have to have all of these tools to make a 8 dollar soldering iron? That radio you broke at the beginning cost more than one of those. Lol

[@xpertgabiyt3715]

Similiar to Creative channel

[@anupsingh619]

Yes it's right

[@nurmohammedfoysalmridha]

soldenring junayed hindi

[@jrsniche6019]

same lang ba sir ang heating elements niya sa mga hair dryer? thank you

[@avadavis4768]

yes, nichrome wire 2 ohms

[@tanimadattaroy6266]

The battery that you used it was of how many m.a.h?? Please reply sir.....

[@avadavis4768]

Appears to be Pansonic ncr18650bg mh12210. 3400mah. Any 21700 or 18650 battery will work.

[@HarshSharma-wc6sr]

Kha sa aai vo tar

[@akhilverma2070]

How long battery life

[@muflatu]

I’ve done many soldering irons fron scrap but none hold more than 1 hour. Better use istick cigarrete electronic module to make it better. More power

[@sumanasenterpricesumanaroy7338]

Soldering beat or uske holder kid ke hai

[@Caillousocool]

?????

[@themastereal8345]

Its a really nice prototype however DO NOT BUILD THIS EXACT THING, it has no protection circuit, just add a tp4056 and it will be 10 times better, even with a port to charge it

[@paulwalker3563]

Glad you said it before I did. That device is dangerous with no BMS.

[@RyouscxreD]

is the protection circuit ressetable

[@sunnyscott8226]

How to add that? is there any tutorial about that?

[@user-jg1db4ky1i]

貌似不錯欸，有得買嗎？

[@apourmaker6055]

沒有呀

[@mdhasanshowfunnyvideo8901]

solar kaise banate hain aur 16 ko kaise Dete Hain yah kar sakte ho to main Tumhen 5 like dunga

[@paulwalker3563]

With unprotected 18650's ??? Like the THEMASTEREAL said, but the part left out: Without a (TP4056, about $2.00 ea) BMS it can/ will catch fire!

[@jagannathsatpathy7479]

Real or fake

[@Nuhzar]

Жало к аккумуляиору на прямую? Неправильно. А защита от разрядки?

[@wazileiyjh]

The main material here is nickel chromium

[@Umesh.0101]

Soldering iron not working 😔😔😔😔

[@Daviie_]

get an actual soldering iron ffs

[@beajeshpatidar8172]

Came fako

[@MadMiff]

WHY, JUST KIN' WHY are you not able to do the simplest of things and just SPEAK to explain? WHY?

[@zamSEG]

hello sir, could you make this for me? i'll pay for it and the shipping cost to malaysia.

[@Chaaaa523]

Just buy lah bro tak mahal pun 30 ringgit dah dapat yang quality

[@zamSEG]

@@Chaaaa523 haha, minat yg jenis pelik² ni bos. bateri pun byk dlm simpanan. nak buat sendiri x berani.

[@Chaaaa523]

@@zamSEG oh😂

[@einadihtun5486]

အ

[@sivanagaraju8035]

Naearaju DJ 🔈🔉🔊🙊🙉🗣😭🇮🇳🇮🇳😭😭😭😭

[@multimediaubaya3152]

Hoax

[@UnknownOverLord]

Fake

[@ahmedusmaniali7156]

Fake video

[@kaiserschnitselsr.9228]

gaarbaage