I made a ramp very similar to Lenny`s, but I used folding ladders. I cut them to required length leaving the hinge intact. Then I fitted the two wooden boards, now I can fold it saving some space. I use mine for my mobility scooter, attach the ramp to my vehicle with two detachable hinges, and now I can take my scooter anywhere.
@Harris44653 жыл бұрын
I am good at Making stuff out of junk but the ladder as a ramp never crossed mind. A+
@TheRiplb2 жыл бұрын
Yeah it was just a piece of junk I had laying around thank you for commenting
@karenosullivan568511 ай бұрын
I use bed frames they are light and very strong.
@nathanking2484 Жыл бұрын
Great job! dandy and cheap :)
@dirtbiker6514 жыл бұрын
Genius! Love it, cheap and easy, just like me! LOL, thanks boss!
@nathanking2484 Жыл бұрын
Me too ;)
@RobBastien9 күн бұрын
Yes sir!!! Thanks for sharing that.
@petermapp59883 жыл бұрын
I need this ! I have a 3 ton truck and when i have to lift my 4000 psi powerwasher on the flat bed !....my back reminds me..get one of this...QUICK. !
@dawsonl9 ай бұрын
Brilliant simple solution. Thanks man!
@valbabcock975410 ай бұрын
Thank you. This is really going to make a difference for our family!❤
@bobbrown57262 жыл бұрын
Totally AWESOME!!!!!!!!
@truesimplicity3 жыл бұрын
I guess New York has hillbillies also... Next time use a couple 2x4s under your 3/4 ply for support, much less effort (no grinding required) and actually cheaper than wasting a ladder. In all seriousness a great effort and show of resolve. Thanks for the video.
@jacksprat31395 жыл бұрын
Good project. I guess you could attach two fold up legs in the middle of the ladder that reaches the ground, which would take twice the current weight. (from say 2 - 400lb. Could then take a quarter ton bike and rider.
@ndreyah11602 жыл бұрын
Like landing gear for a trailer. Nice
@robvarley30912 жыл бұрын
That was awesome
@timrader1260 Жыл бұрын
Freakin Dandie ! Cheap ! 😂 Hell yea 👍 !
@federicoiriart12943 жыл бұрын
So good 👌👌👌
@MrFlashman104 жыл бұрын
Well done!
@WholeFoodPlantPeople5 ай бұрын
"here i got this Piece of Crap 16' ladder" LOL
@jacksprat31395 жыл бұрын
A great idea...might take up to 200lb easy...
@frazzledfishing70422 жыл бұрын
Great idea, but with all the scrappers out there it'll be hard to find a half a ladder. I'm also cheap so buying one doesn't work.
@TheRiplb2 жыл бұрын
You can use anything to support it
@TheRiplb2 жыл бұрын
I just had that laying around I'm a painter
@WholeFoodPlantPeople5 ай бұрын
gave me some good ideas, thanks
@petermapp59883 жыл бұрын
Cheap...and effective !
@francesevans90038 ай бұрын
wondering if this idea would work for a 3 to 4 foot ramp for my side sliding door on my chevy mini van I have been using 2 different size step stools and it is taxing my knees my hips and back getting in, and getting out is the worst. I can easy store the ramp on top of my bed or on the wall side bed when not in use Thoughts anyone!
@danielgw19646 жыл бұрын
friggin dandy cheep
@zadtrax Жыл бұрын
A ladder might stop the bow, but now your ramp is a lot more heavy and takes up a lot more thickness when it comes to trying to store it and take it with you in the van. And you can’t fold it or collapse it to make it more portable.
@lindawilliams75196 жыл бұрын
The end is the dandies part of this video!!! Lol
@nwfrv2 жыл бұрын
Hi I’m trying to make one of these for my brother and i was concerned about the wood material and its dimensions, can you guide me about your ramp wood type and dimensions mr lenny
@TheRiplb2 жыл бұрын
I believe it's 3/4 plywood 8 ft long 3 ft wide it's been a while
@TheRiplb2 жыл бұрын
I believe it's 3/4 plywood 8 ft long 3 ft wide it's been a while
@evangelinagb17922 жыл бұрын
my question is how to fasten the wood to the car well because it would be to get on a disabled person and I can't see it in the video
@TheRiplb2 жыл бұрын
Well pretty much I made that for a lawn mower or a snowblower 👍
@marthaleone5842 жыл бұрын
😁👋👋👋
@GannyAngie3 жыл бұрын
What screws did you use on ratchet strap and on the ladder, and how did you screw it through the ladder?
@TheRiplb3 жыл бұрын
Self-tapping screws the length depends on the thickness of your plywood
@TheRiplb3 жыл бұрын
I used self-tappers on the ratchet strap too
@GannyAngie3 жыл бұрын
@@TheRiplb Thank you
@VictorVictor-hq7ui5 жыл бұрын
That was rough as fuck. Oh and wear goggles when grinding.
@Goghvangoghandme5 жыл бұрын
How long is the ply? 6’?
@TheRiplb5 жыл бұрын
I can't quite remember exactly 8' I believe I only used it once.Worked great.
@jacksprat31395 жыл бұрын
Wonder what weight if can take
@TheRiplb5 жыл бұрын
My welder is heavy probably 170 lbs it handle it with no problem
@mannyechaluce38143 жыл бұрын
Cheeeep
@Bass.Player3 жыл бұрын
It looks like it's 3/4" plywood so it's going to be heavy...