How to make a reliable center finder

I made a center finder with high precision and easy to use.
【Plan List】
jsk-koubou.sto...
[JIG]
・​Extendable Circle Cutting Router Jig
• 【DIY】 ​Extendable Circ...
・Drill stand
• Making a 6 in 1 Drill ...
・Magnet drill stand
• DIY Making A Magnetic ...
・Belt sander
• Make a Belt sander @Wa...
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
• Making a 2-in-1 Circul...
・How to make Line laser module
• 【DIY】格安レーザーを改造。ラインレーザー...
・Workbench
• Creating a High-Rigidi...
・Homemade height gauge
• Homemade height gauge ...
・right angle corner clamp
• How to make a right an...

[@jisakukobo]

If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。

[@lospoliti-locosdelmomento770]

It is useless to show your videos if they do not help to carry out a similar project for whoever wants it if you do not give the measurements

[@rosycorona592]

@@lospoliti-locosdelmomento770 But he gives you the idea...do it

[@michaelcherry8952]

William Morris said "Have nothing in your houses that you do not know to be useful or believe to be beautiful". After watching your videos, I believe your philosophy for making tools and jigs is that you want both usefulness AND beauty. This is not only a very useful tool, the care and craftsmanship that you put into creating it makes it beautiful as well. Watching your videos is always a pleasure. Thank you for continuing to post them!

[@afanasyeff]

Возможно, единственный канал, на котором сначала идет демонстрация изделия в работе, а потом процесс изготовления. Работы великолепны )

[@hildetoepoel812]

I sleep poorly. I try to make my house beautiful during the day. i know i am an amateur. At night when I can't sleep I watch these demonstrations. No shouting, no music, just the sound of clean machines and craftsmanship. I watch with admiration and great appreciation. When a beautiful piece of work is delivered again, I am so happy. I have sleep again and I know what to expect tomorrow, a lot of work, but I feel good and go to sleep and my thought is: I will get that garden staircase level, if not tomorrow then the day after tomorrow ”. and with a satisfied smile I fall asleep.

[@Pho8os]

You sir are a professor of perfection.

[@Bob_Adkins]

Even his sawdust looks neat and clean.

[@faguolvlv]

Nope...

[@catbird1759]

My grandfather was a master carpenter, he would have been god sent with this guys tools. Perfection at it's best in this video. I'll be making an all aluminum one for my metal fabrication. Great idea.

[@davidurdahl6656]

I want a wall mounted saw!!! Never gave it a second thought at the home de pots.. Never though I could have one at home.

[@QuicksandDan]

That trick shot at the end!!! I love this guy. No intention of making 90% of the beautiful things he creates, but I love watching. I like seeing that DIY router table getting used.

[@andrzej3511]

The best... themselves: the cleanest workshop, the best hand-made tools, the most careful workmanship, the nicest appearance (of both the workshop and the products), the best creativity, the best usefulness - I can count the "most" endlessly. Careful preparation of materials and tools, calm but very thoughtful and methodical work, accuracy, order, diligence. It is 100% certain that the effect will be perfect. Great movies, I don't hesitate to name you: master!!!

[@antoinegil7361]

They say perfection is not of this world, well I say it is wrong, perfection exists and I discovered it while watching you work. An enchantment ...

[@raghuvaranravindran8499]

How meticulous! Very inspiring. Action speaks stronger than words! Without uttering a word or a subtitle, he has taught me so many things. Hats off

[@0sae0911]

毎度のクオリティに感服しております。 そして毎度思うんですけど治具作ってるときに使ってる治具を作るとこから始めないと…！って思ってしまうかつこんなクオリティ出来るまでにどんだけ修行せなあかんやらで、この治具作るまで到達するには果てしない道のりが。 動画拝見してるだけでも楽しいですけど！！！

[@jisakukobo]

take it easy

[@TomGlander]

Brilliant solution to an age old problem. Most excellent!

[@MFunkibut]

A clever and incredibly useful update to the classic center finder!

[@johnbarbuto5387]

Who is this person?! This person has taken woodworking and turned it into an art form. Amazing shop. Love to see the shop and videos on how to make tools of this caliber. Wow! Over a million subscribers - and no surprise. Notably, this appears to be a highly efficient shop utilizing a small space. Impressive!

[@paulnieuwkamp8067]

You keep showing me ways to do things in clever ways that I had not thought of before. In the previous video you used the two first holes to make space out the third one, in this one you use a spacer block... I like your projects, and bought the plans for the 6-in-1 drill and panel saw. Now, to find time and space to actually build them...

[@slunk007]

I just noticed that you are using a kuru toga pencil. I ordered one of those from Jet Pens many years ago and it still works great.

[@JesseG2573]

precision craftsmanship at its finest

[@Richard-wk9le]

From someone who made a bird with flapping wings fly, some how this bit of genius is not surprising and again as always we learn-well done.

[@lounischabane6724]

ce n'est plus du bricolage mais un travail de chirurgien. vous etes trop bien equipé mon ami pour etre obligé de bricoler. merci quand-meme de partager

[@user-abcd-way]

Поражаюсь этому Мастеру! Сколько неисчерпаемых великолепных идей! Виват Мастер, Виват!

[@nitnatsnok2526]

да....все работы мастерские........а Вы заметили руки мастера...........они не мужские.............это все делает мастер женщина..............какая молодец......и меня еще поражает ее мастерская с уникальными инструментами

[@nitnatsnok2526]

а может быть я и ошибаюсь

[@user-abcd-way]

@@nitnatsnok2526 Да, Вы однозначно ошибаетесь, этот Мастер мужчина. Я слежу за всеми его видео и однажды мне попалось видео, где он монтирует систему кондиционирования ( он великолепный мастер на все руки ). И там случился прокол - камера захватила его в кадр в полный рост, где я и увидел его лицо. Красивый японец, а такие умелые и КРАСИВЫЕ руки, как у девушки - ну, это , наверное, от Бога!

[@roonny7467]

There is one word that defines you perfectly: Precision

[@suryadidedy70]

This is Art👍, i love the detail and precision of your work.

[@Dsoginventor]

JSK-koubou, you have become my favorite woodworker.

[@RobWhittlestone]

When I watch this master craftsman at work, it is like meditation. Every step calm and measured. The universe is in balance.

[@norbertopisanti125]

Estimado JSK, El muestrario de la maquinaria utilizada, hace que pensar si la habilidad es tuya o de las maquinas . No hay que degustar comida frente a los hambrientos, creo que es una frase de un sabio chino..........

[@gregcohane1095]

Until this video I had never seen a million dollar work-shop nor a Merlin of maximum carpentry skills. Beyond superb.

[@starkwedder9787]

Very clever. Will you explain the purpose of facing with a different wood? And what did you use as bearing? Thanks and the usual compliments

[@talegunner115]

Ive been following you for over a year. You continue to amaze me.

[@paulbatarseh7476]

You are a woodworking genius! I love your creativity!

[@RimlaRob]

Dear friend, I am amazed by your videos. The quality, beauty and precision of the pieces made by you are inspiring. I'm your fan. Hug.

[@andreaspagnatosquit3844]

In any case, thank you for what you're doing. You have a huge patient. It shows.

[@joshwalker5605]

Great idea! If you don't have a fancy optical center punch you can just use a dividers to mark the pencil & pin holes.

[@keirfarnum6811]

Adding those L brackets to extend the line to the end was a stroke of genius. Impressive!

[@josejmourente]

JSK-koubou trabajas con mucha técnica, lo haces impresionantemente bien

[@kevinhoppenworth6708]

Wow-what an easy addition, to fix a long time problem.

[@davidwang4680]

This is exactly what I need. Thank you for sharing this idea

[@garymcintyre1498]

It's great watching a master at work , sure is a pleasure watching you build things , peace out from scotland,,,

[@torstenbehrendt870]

Nice job but why would I pre punch the drill holes if I put the workpiece into a jig that prevents the drill to self-center?

[@torstenbehrendt870]

Pre punch OR stop blocks. Both doesn't make sense to me.

[@guylabesseuille2716]

Simple mais redoutablement efficace. Bravo

[@hansbachtold1966]

amazing this guy, absolutely top, perfection at its best, just great.

[@lewislevine8095]

Impressive. Also impressive are your tools, setups and hold downs.

[@sjonkers96]

i like how an american channel would title this: The best center finder in the world. This dude just says, how to make a reliable center finder.

[@LovemeAquarius]

Can't expect anything better than this guy ))

[@jasenmorin4936]

every time is see your shop i drool.

[@ОлегАбрамов-г7л]

There is no it not the cowboy, it is academy of JSK-koubou

[@landroveraddict2457]

Really neat and well executed tool build. It makes me happy someone at your skill level suffers from the same affliction as me, NEVER being able to mix the right amount of epoxy. With enough left over to do the job again twice! Shall ever be know as JB's law!

[@huyle-pk7or]

I am Vietnamese, I am very much a follower of yours, good luck

[@TAO495]

Great IDEA. I will remember the next time I need it. For me a piece of wood with 2 nails and the mid point mark would do. Thanks.

[@kabaniumus]

Your videos are always useful, even when you don't need a product, as there are many good technical solutions. I am always looking forward to your new projects.

[@stewartmcmanus3991]

Such a clever little thing, perfect.

[@dichev]

🙏 Your videos are pure meditation for me. 🙂

[@murahatena]

センター出しって大切ですよね！良いですね！

[@Gus0046]

Esto le llamo yo espectáculo del bueno!! Buen trabajo y gracias por tus vídeos.

[@IppiopaidFEEDBACK]

He should come out with the book, it could be a e-book. It would be nice he could have all of his tools that he made.

[@georgesverlow1351]

I am always fascinated the work you do and the and the simplicity of your jigs. I would like to know where did you get your center maker and the manufacturer of the unit. Keep up the great work.

[@viorsa8200]

Otra clase magistral del maestro,la perfección absoluta elevada al máximo nivel,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)

[@johannes_franciscus_kok]

I really like your " a capella" video clips, educational without words, keep up the nice work ................. from Italy with love ................

[@narcisomoreno6333]

Tt

[@brucecrawford4399]

This guy is a champion

[@raymitchell9736]

This is _Exactly_ my problem with center finders.... and for all these years I thought it was only me! (LOL) It's a pretty nifty solution... now I am wondering if there are other ways to solve this and maybe something that can expand to handle other sizes of larger stock... wow... you've got me thinking... and that's probably not a good thing in my case 😁 LOL. well, maybe you'll come up with another brilliant solution for that? Anyway... Wonderful presentation as always, and thanks so much for the video!

[@craftbyhirotoyamazaki]

いつも凄いですけど、今回も凄いっす！流石ですね！脱帽です😆👍

[@mikalaim5313]

Самый гениальный центроискатель!!!

[@lohikarhu734]

You are "the man" !! Cool, simple, elegant, almost Nihonjiin in style ;-) oyakata

[@sergiocaramit7060]

Parabéns professor pardal !!!

[@pereirinhadasilva]

The best off the best my friend

[@smiresman8579]

You really are an artist, good luck

[@jeanloreaud9282]

Sympa la fabrication de ce petit outil de traçage,bravo à bientôt salut Jeannot 🛠😉

[@dominikvdovski996]

Man, you are a genius!!!

[@arifianbayu]

always impressed with every project you do sir, clean and precise

[@GoatZilla]

I wonder if this could be directly adapted into a drill jig, since most of the time I'm only looking for the center to drill a hole. So instead of marking and drilling, go straight to drilling.

[@jisakukobo]

This work is done for punch work. It may not be necessary for woodworking as you say. However, since I have experience in iron processing, I was reluctant to drill as it was.

[@landroveraddict2457]

instead of the pencil insert a hard bush like a bearing sleeve and drill through the bush with an appropriate size drill bit.

[@jisakukobo]

@Land Rover Addict Your idea came up with a good idea. Just chuck the punch into the drill and push it in. As long as it uses a drill fence, it can be processed with extremely high precision.

[@somenicedutchguy638]

Gold. Again. Thank you!

[@langrock74]

I mean, that center punch, just wow! Never seen that. Not sure it was required here, though, since you did use that spacer trick on the drill press to get the equidistant outside holes. The exact location of the center hole didn’t matter at all.

[@JoseSilveira-newhandleforYT]

That is the fanciest center jig I've seen! I like it! I use one made with two wood dowels - works good enough for me :-)

[@_WillCAD_]

Another brilliant, precise tool! Well done!

[@patrickraikes9197]

LOOKS classy...!!

[@pierregoulet6530]

Thank you for your videos, you are very good!!

[@homemadetools]

Beautiful tool build as always. We featured this video on our homemade tools forum this week :)

[@horusak4232]

Very neat and beautiful indeed. But isn't this the very purpose of marking gauge?

[@vibhordublish9914]

Excellent. I'm quite impressed by your determination to get the perfect craft done. My best wishes to you.

[@CachSoul]

The perfection-man always does the perfect things. Absolutely done as always, Sir!

[@Greg8872]

Normally I do not care for non narrated build videos, but yours are just so good I still watch. Is the wall saw station something you built or purchased?

[@jisakukobo]

↓ kzbin.info/www/bejne/g2Lbin6taquDY5I

[@Greg8872]

@@jisakukobo Thank you, I must have missed it when I went looking on your channel.

[@benwei6]

Wow!It is really useful and good look. I'll built one. Thank you for sharing!

[@IZSIBIRIYA77]

Очередной раз кайфанул!

[@juancarloslopez688]

Master of perfection

[@boots7859]

Another alternative would be to simply make the original tool longer. However that could be a pain in general and this looks like an excellent solution.

[@bladepianist]

I don't see how making the original longer is a solution... You'd still fail on the ends

[@francescobattaglia5322]

Gongratulations, you are a genius!!! Thank you for all those videos!!

[@ubiratanoliveira692]

Obrigado por compartilhar um pouco de sua criatividade.

[@つるつるピカピカ]

この羽をつけるだなんて発想は夢にも考えた事はなかったです、結局は端々は定規あててケビかなきゃならんと思っていたので有用性や利便性を理解しながらも作ろうとまでは思ってませんでした…2～3日中に作ってみます(めっちゃ簡易なやつを)。

[@joniblack5584]

こんにちは！ あなたの発明に感心しました！ 👍👍👍

[@irvingcobian]

Wow such a clean great looking tool!

[@GreenDeetype]

Thank you for the marvelous video. It is again a wonderful pleasure tu watch your work. Greetings fro germany. KD

[@rickgordon8377]

Please, the special angle incorporated with your hinge system isn't referenced and if you made it I'd like to see how. Appreciate your help in this request.

[@danimalmaxasis2762]

Really really nice work man especially with the addition of the extenders for a full-line follow through I have an idea maybe you could add a compression spring to the pencil then it would be really a 1 hand tool just thought thanks again!

[@nathalieheytens5777]

Excellent work as usual. Very ingenious, I'm impressed.

[@pherzmngz1484]

You are a legendary in furniture work great👍

[@daltonmckee4788]

I really appreciate the video, but the answer is an optical center punch and measure from both ends of the block when placing holes

[@nunoandre4964]

I only see perfection...thank you SIR :)

[@georgesverlow1351]

Let me clarify my post I made recently. I was not stating how the center finder was made, but the item he used to identify the hole locations with the cross hairs. This item is very unique and I haven’t seen this item any where in the states.

[@billyblackie9417]

Really brilliant great man

[@manvar8893]

JEWELER👍. Молодец