How To Make a Sheet of Carbon Fibre. Resin Infusion. TUTORIAL

[@CarbonWorkshops]

Plenty of videos out there but thought I'd share my take on making flat sheet. Next video will making something special from it! 🤞

[@zundappwatercooler]

Thanks for showing us

[@jeanfrancoispoivre4438]

Magnifique ❤️

[@HEKOT77]

Why did you cut the vacuum hose in the end? You could re-use it later.

[@luisrosa6409]

Wao que bonito. 👌 me gustaría saber que resina estas usando ?

[@CarbonWorkshops]

Hi, it's in the description

[@lmSteveo]

Do you not have to put the item in the oven for post cure?

[@mauriziogiasan4411]

complimenti per

[@garyengland5326]

Why do you keep disconnecting the catch pot line? Just clamp it and leave it

[@Codybarenbrugge]

I've been getting started into doing small carbon fiber projects for my car. i am uncertain as to what vacuum pump and overflow tank to get. would there be one you would recommend?

[@CarbonWorkshops]

I use the ec4 pump from easy composites, also the catch pot from them to.

[@Codybarenbrugge]

@@CarbonWorkshops thank you do you have any issues with it creating vapor? I assume not but I think it’s worth asking?

[@CarbonWorkshops]

@@Codybarenbrugge no issues at all 👍

[@Codybarenbrugge]

@@CarbonWorkshops awesome thank you very much

[@bymaill21]

Why do you have to stick a piece of double-sided glue vertically like that when using a vacuum bag? Sorry, my English is not good so I have to use Google Trans 3:35

[@eizzie7088]

Hallo sir...may i know veccum compressor brand🙏

[@CarbonWorkshops]

It's from easy composites 'EC4'

[@eizzie7088]

@@CarbonWorkshops ouhh...top brand👍🏻🤙...tq sir ....im still new for infusion work😅....im just know laminate by hand😅

[@dabalok_speargun840]

can i order?

[@АлмазАлмаз-б9ш]

Интересно как вы матрицы делаете

[@aleksastefanovic1757]

how do you calculate how much resin you need?

[@CarbonWorkshops]

I'm unsure, but wish I did before I started this haha

[@garyengland5326]

You weigh the cloth and that is how much resin you need, then add approximately 700gsm for the infusion mesh

[@robertjackson7590]

Great channel, great work. If you lower your vac after infusion it won't leave the weave flat, more depth and shows off the weave a little more. Just a suggestion. 4x4 twill looks very cool. Check the dash I did a wet layup thin sheet and heat to form. Again excellent work you're doing. kzbin.info/www/bejne/mmHap4ODhNGXmpo